Parts for Ge P2S930SEL2SS: Gas & Burner Parts

Converting your range from natural gas to propane? This LP conversion kit includes all necessary orifices and fittings for a complete fuel conversion.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

If your ice maker isn't filling properly or ice cubes are misshapen, this inlet jet restores correct water flow to the dispenser and ice-making area.

Surface burner base that covers and protects the burner cavity on gas ranges. Replace if warped from heat, cracked from impact, or corroded over time.

Fix uneven or smoky burner flames with this gas range burner injector. Restores proper gas flow for even heating. Simple DIY installation.

Gas burner not lighting or flame too weak? Replace the natural gas orifice spud to restore proper gas flow. Quick 15-minute fix for most models.

Fix weak or unstable flames by replacing a clogged or damaged burner orifice spud. Threads into the holder to meter gas flow for reliable ignition.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Left rear orifice holder for gas ranges. Secures the gas orifice in place on the burner assembly. Replace if cracked, broken, or missing.

Fix uneven flames or burners that won't light properly with this gas range orifice holder. Common repair for flame control issues. Basic difficulty.

Orifice holder for gas ranges. Secures the burner orifice in place. Replace if cracked, broken, or damaged to ensure proper burner assembly.

This main dual valve tube routes gas between the oven/range valve assemblies to ensure proper fuel delivery for burner operation. Replaces a damaged or corroded primary gas tube to restore consistent ignition and burner performance. What it does:

• Connects the main dual valve to the manifold and burners for controlled gas flow
• Supports reliable ignition and even flame distribution when properly sealed
• Commonly needed when the tube is bent, cracked, or shows gas leakage
• Used during repairs addressing weak flames, intermittent lighting, or visible damage to the gas tubing

• One main dual valve tube

• Turn off gas supply and electrical power before starting any service
• Inspect fittings and seals; use manufacturer-specified gaskets and thread sealant where required
• After installation, perform a certified leak test and verify correct burner ignition and flame patterns

Fix burners that won't ignite or have uneven flames with this gas range valve and burner assembly. Controls gas flow and flame intensity for each burner.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

Burner won't light or flame is uneven? This gas range burner valve controls gas flow to restore reliable ignition and consistent flame on your stovetop.

Fix burners that won't light, adjust, or maintain flame. This valve regulates gas flow to individual cooktop burners. Moderate DIY repair with hand tools.

If your range knob won't stay in position or settings are unresponsive, this rotary selector switch restores precise control. Direct-fit replacement.

Dual oval burner injector for gas ranges. Installs into the center burner assembly. Replace if cracked, clogged, or missing for proper gas flow.

Fix uneven flames or burners that won't light properly with a new orifice spud. This gas range part regulates fuel flow for consistent cooking performance.

Replace your gas range's burner injector assembly if cracked, broken, or worn. Installs in the burner system to restore proper gas flow and function.

Fix uneven flames or burners that won't light properly with this gas range orifice spud. Controls gas flow to burners for proper ignition and flame.

Burner won't light or flame is weak or uneven? This injector assembly meters gas flow from the manifold to restore proper ignition and stable flame.

Burner won't ignite or heat evenly? This dual oval burner assembly restores proper flame distribution. Moderate DIY repair for gas ranges.

Fix pilot lights that won't stay lit or igniters that won't spark. This high voltage electrode and harness assembly restores gas ignition in ranges.

Gas pressure regulator for ranges and ovens. Mounts to manifold to control incoming gas supply. Replace if cracked, leaking, or damaged threads.

Fix F97 error codes and overheating ovens with this cooling fan sensor. Monitors ventilation and temperature control. Moderate difficulty repair.

If your oven shuts off during preheating around 200°F, the tangential blower may be failing. This cooling fan circulates exhaust air from the cavity.

Fix a non-working convection fan or cooling blower with this range blower motor wiring harness. Common repair for ovens with electrical failures.

Routes gas from manifold to burner ports for proper ignition and flame stability. Replace if burners won't light or flames are uneven. Confirm fit with your model.

This air deviator routes and directs cold airflow inside the refrigerator to balance temperatures between compartments and improve cooling performance. It restores proper air distribution when the original piece is cracked or misaligned. What it does:

• Redirects chilled air from the evaporator to the correct compartment to help maintain even temperatures
• Helps prevent warm spots caused by blocked or misdirected airflow
• Works with the fridge's air circulation path to support normal cooling cycles
• Common symptom: uneven cooling or air bypass near the evaporator cover

• One air deviator

• Inspect and replace only when the existing deviator is broken, warped, or missing
• Handle plastic parts gently to avoid cracking; align tabs before snapping into place
• Always unplug the appliance before accessing internal panels or components
• No special tools typically required;