Parts for Ge PGB940SEJ3SS: Gas & Burner Parts

Converting your gas range from natural gas to propane? This LP conversion kit includes all necessary orifices and components for safe fuel type conversion.

Stainless steel cleaner for gas ranges and cooktops. Restores shine and removes fingerprints, smudges, and streaks from exterior surfaces.

Converts your gas range to liquid propane for high-altitude use. Ensures proper gas flow, easy ignition, and stable flames in low-pressure conditions. Confirm fit with your model number before ordering.

Convert your gas range for proper operation above 2000 feet elevation. This high altitude kit adjusts air-fuel mixture for optimal performance at altitude.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

Surface burner base that covers and protects the burner cavity on gas ranges. Replace if warped from heat, cracked from impact, or corroded over time.

Burner not heating or won't turn on? This switch harness restores power between your range's infinite control switch and cooktop burner wiring.

Fix uneven or smoky burner flames with this gas range burner injector. Restores proper gas flow for even heating. Simple DIY installation.

This manifold pipe routes gas from the range's valve assembly to the individual cooktop burners, restoring safe and consistent fuel delivery for reliable burner operation. Replace a damaged or corroded manifold to stop leaks and restore proper flame distribution. What it does:

• Channels gas from the control valve block to each burner for ignition and steady flames
• Helps maintain even burner performance and consistent heat across the cooktop
• Failsafe for preventing gas leaks when intact; visible damage, corrosion, or cracks can cause unsafe operation
• Commonly replaced when burners won't light, show weak or irregular flames, or after leak detection

• Turn off the gas supply and unplug the appliance before servicing.
• Inspect and replace any damaged seals, gaskets, or fittings when installing the manifold.
• Test for leaks with a soap solution or approved leak detector after installation; do not use an open flame.

Fix improper flames or weak ignition on your range burner with this LP orifice spud. Meters propane flow for correct flame size and safe operation.

Fixes weak or uneven flames on LP gas ranges. This orifice spud meters propane flow to the burner. Easy DIY install restores proper flame size.

Protective cover that slips over the gas valve shaft to shield valve components from spills, food debris, and moisture. Replace if cracked or missing.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Weak or uneven burner flames? This orifice holder secures the gas orifice in the burner tube for stable fuel delivery and consistent flame performance.

Replace your gas range oven orifice holder if burners won't light or you're converting between LP and natural gas. Simple socket wrench repair for most DIYers.

Uneven flames or weak ignition? This orifice holder secures your gas range burner orifice for proper alignment and consistent gas flow to the burner.

Fix uneven flames or burner ignition issues with this gas range bake burner tube. Delivers gas from valve to burner for proper heating and baking.

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Insulation pad that wraps around the burner box assembly beneath the cooktop. Replace if torn, compressed, disintegrated, or missing to restore heat protection.

Dual oval burner injector for gas ranges. Installs into the center burner assembly. Replace if cracked, clogged, or missing for proper gas flow.

Weak or uneven flames on your gas range? A clogged or damaged orifice spud restricts gas flow to the burner. Simple replacement restores proper flame size.

Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.

Fix burners that won't ignite or have uneven flames with this gas range valve and burner assembly. Controls gas flow and flame intensity for each burner.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

If your gas burner won't turn off completely or won't ignite, this burner valve assembly controls gas flow to individual burners for precise heating.

Fix burners that won't light, adjust, or maintain flame. This valve regulates gas flow to individual cooktop burners. Moderate DIY repair with hand tools.

If your range burner won't light or heat unevenly, this top burner assembly restores proper flame distribution. A moderate DIY repair for gas ranges.

This dual oval orifice holder secures two burner orifices and helps deliver the correct gas flow to the cooktop burners for consistent ignition and stable flames. Replaces a worn or damaged holder to restore proper burner performance. What it does:

• Holds and positions two oval gas orifices so the burner receives correct gas flow
• Restores even flame distribution when the original holder is cracked, bent, or missing
• Helps resolve burner issues like weak, uneven, or inconsistent flames and intermittent ignition
• Keeps orifices aligned to the burner head for reliable lighting and efficient combustion

• One dual oval orifice holder

• Turn off gas supply and power to the appliance before starting any work
• Remove burner grates and caps; handle orifices carefully to avoid damage or misalignment
• Tighten securely but avoid overtightening; inspect surrounding gaskets and seals and replace if damaged

Fix range burners that won't light or spark continuously with this electrode and harness assembly. Restores reliable ignition to gas range cooktops.

Fix gas smell or yellow flames on your range burners with this valve control assembly. Regulates gas pressure and flow for safe, reliable ignition.

Oven won't heat or takes forever to preheat? This glowbar igniter heats up to ignite your gas burner. Common DIY fix restores proper oven temperature.

Fix a gas oven that won't heat or takes too long to preheat by replacing a weak or cracked igniter. This hot surface igniter lights the burner reliably.

Carries gas from the pressure regulator to the burner valve manifold on your gas range. Replace if the tube is damaged, cracked, or leaking to restore safe fuel flow.

Flame deflector for gas ranges. Installs above the burner to direct heat evenly. Replace if cracked, warped, or missing for proper heat distribution.

Mounting screw for range installation and assembly. Replace missing, stripped, or damaged screws to secure panels, brackets, or components properly.