Parts for Ge PGB960EEJ3ES: Gas & Burner Parts

Converting your gas range to run on butane? This conversion kit includes orifices and components needed to safely switch fuel types. Moderate difficulty.

Converting your range from LP to natural gas? This conversion kit includes orifices and components to safely reconfigure compatible gas range burners.

Converting your gas range from natural gas to propane? This LP conversion kit includes all necessary orifices and adapters for safe fuel conversion.

Converts your gas range to liquid propane for high-altitude use. Ensures proper gas flow, easy ignition, and stable flames in low-pressure conditions. Confirm fit with your model number before ordering.

Convert your gas range for proper operation above 2000 feet elevation. This high altitude kit adjusts air-fuel mixture for optimal performance at altitude.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

If your ice maker isn't filling properly or ice cubes are misshapen, this inlet jet restores correct water flow to the dispenser and ice-making area.

Surface burner base that covers and protects the burner cavity on gas ranges. Replace if warped from heat, cracked from impact, or corroded over time.

Range controls not responding or burners won't ignite? This switch harness restores electrical connections. Moderate DIY repair, typically 30-45 minutes.

Fix uneven or smoky burner flames with this gas range burner injector. Restores proper gas flow for even heating. Simple DIY installation.

Protective cover that slips over the gas valve shaft to shield valve components from spills, food debris, and moisture. Replace if cracked or missing.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Weak or uneven burner flames? This orifice holder secures the gas orifice in the burner tube for stable fuel delivery and consistent flame performance.

Weak or uneven flame from your gas range burner? The orifice holder secures the gas spud for proper alignment and consistent fuel delivery to burners.

Replace your gas range oven orifice holder if burners won't light or you're converting between LP and natural gas. Simple socket wrench repair for most DIYers.

Uneven flames or weak ignition? This orifice holder secures your gas range burner orifice for proper alignment and consistent gas flow to the burner.

Oven not heating evenly or baking too slowly? This bake burner restores consistent heat for proper baking. Direct replacement for the main heat source.

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

If your broiler won't heat or heats unevenly, the broil burner may need replacement. This gas range part restores proper broiling. Moderate DIY repair.

Insulation pad that wraps around the burner box assembly beneath the cooktop. Replace if torn, compressed, disintegrated, or missing to restore heat protection.

Oven not heating or cooking unevenly? This bake burner assembly restores proper heat distribution so food cooks evenly and your oven reaches set temps.

Fix uneven burner flames or weak gas flow with this range regulator tube. Connects gas regulator to manifold. Moderate DIY repair, 30-45 minutes.

Dual oval burner injector for gas ranges. Installs into the center burner assembly. Replace if cracked, clogged, or missing for proper gas flow.

Orifice spud that controls gas flow to burners on gas ranges and cooktops. Replace if cracked, clogged, or damaged to restore proper gas distribution.

Weak or uneven flames on your gas range? A clogged or damaged orifice spud restricts gas flow to the burner. Simple replacement restores proper flame size.

Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.

Burner won't light or flame is uneven? This orifice spud secures the gas orifice for consistent flow and proper ignition. Simple DIY fix for range burners.

Fix burners that won't light, adjust, or maintain flame. This valve regulates gas flow to individual cooktop burners. Moderate DIY repair with hand tools.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

Fix burners that won't ignite or have uneven flames with this gas range valve and burner assembly. Controls gas flow and flame intensity for each burner.

Gas won't shut off or burner stays on? This safety valve controls gas flow and prevents dangerous pressure buildup in your range. Direct replacement part.

Replace your range's 90° elbow assembly to restore proper airflow routing between hose sections. Install when connections leak or don't fit securely. Verify fit with your model number before ordering.

90-degree elbow assembly for gas ranges. Connects gas supply lines at right angles. Replace if cracked, corroded, or leaking to ensure proper fitment.

90° elbow assembly redirects fluid or discharge lines at a right angle on your gas range. Replace if cracked, broken, or worn to restore secure connections.

Oven won't heat or takes forever to ignite? This gas range igniter glows to light burners. Common fix for inconsistent ignition. DIY replacement part.

Fix an oven that won't heat or takes too long to ignite. This glowbar igniter generates the pilot flame for your gas range's bake burner. DIY-friendly repair.

Lower bake supply tube for gas ranges. Delivers gas to the lower bake burner. Replace if cracked, damaged, or leaking to restore safe oven operation.

Burners won't light or spark is weak? This range ignition electrode and harness delivers high-voltage spark to igniters for reliable burner ignition.

Fix burners that won't light or stay lit with this dual safety valve. Automatically shuts off gas flow during flame outages or leaks on gas ranges.

Oven won't heat or ignite? The igniter glowbar lights gas burners. Common fix for no flame or weak glow. DIY-friendly repair, takes about 30 minutes.

Molded air and heat shield that directs airflow and protects internal components in your gas range. Replace if cracked, broken, or missing.

This broil shield protects the oven interior above the broiler, helping direct heat and shielding the oven cavity from intense broiling temperatures for safer, more consistent broiling results. Durable metal construction resists warping. What it does:

• Shields the oven top and components from direct broiler heat to prevent damage and discoloration
• Helps maintain more even broiling by directing heat where food is placed
• Reduces the risk of flare-ups reaching wiring or insulation behind the oven liner
• Restores proper clearance between the burner and oven liner for safe operation

• One broil shield

• Disconnect power (and gas, if applicable) and allow the oven to cool completely before starting
• Remove oven racks and access the broiler area to unfasten and replace the shield using basic hand tools
• Inspect mounting tabs and surrounding liner; replace any damaged clips or screws as needed

Mounting screw for range installation and assembly. Replace missing, stripped, or damaged screws to secure panels, brackets, or components properly.