Parts for Ge PGB965YP1FS: Gas & Burner Parts

Converting your gas range from natural gas to liquid propane? This LP conversion kit provides the correct fuel delivery components for safe operation.

Converts your gas range to liquid propane for high-altitude use. Ensures proper gas flow, easy ignition, and stable flames in low-pressure conditions. Confirm fit with your model number before ordering.

Convert your gas range for proper operation above 2000 feet elevation. This high altitude kit adjusts air-fuel mixture for optimal performance at altitude.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

Small mounting bracket secures components beneath your cooktop surface. Replace if damaged, bent, or missing to restore proper alignment and stability.

Surface burner base that covers and protects the burner cavity on gas ranges. Replace if warped from heat, cracked from impact, or corroded over time.

This manifold pipe routes gas from the range's valve assembly to the individual cooktop burners, restoring safe and consistent fuel delivery for reliable burner operation. Replace a damaged or corroded manifold to stop leaks and restore proper flame distribution. What it does:

• Channels gas from the control valve block to each burner for ignition and steady flames
• Helps maintain even burner performance and consistent heat across the cooktop
• Failsafe for preventing gas leaks when intact; visible damage, corrosion, or cracks can cause unsafe operation
• Commonly replaced when burners won't light, show weak or irregular flames, or after leak detection

• Turn off the gas supply and unplug the appliance before servicing.
• Inspect and replace any damaged seals, gaskets, or fittings when installing the manifold.
• Test for leaks with a soap solution or approved leak detector after installation; do not use an open flame.

If your ice maker isn't filling properly or ice cubes are misshapen, this inlet jet restores correct water flow to the dispenser and ice-making area.

Fix uneven or smoky burner flames with this gas range burner injector. Restores proper gas flow for even heating. Simple DIY installation.

Protective cover that slips over the gas valve shaft to shield valve components from spills, food debris, and moisture. Replace if cracked or missing.

Center burner won't light or has weak flame? This orifice holder routes gas from the valve to the burner and keeps the orifice aligned for proper ignition.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Weak or uneven burner flames? This orifice holder secures the gas orifice in the burner tube for stable fuel delivery and consistent flame performance.

Replace your gas range oven orifice holder if burners won't light or you're converting between LP and natural gas. Simple socket wrench repair for most DIYers.

Uneven flames or weak ignition? This orifice holder secures your gas range burner orifice for proper alignment and consistent gas flow to the burner.

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Replace a gas range bake burner if your oven won't heat or bakes unevenly. This repair typically takes 30-45 minutes with basic hand tools.

Weak or uneven broiling? This tubular broil burner restores concentrated high-heat performance for even browning and crisping in gas range ovens.

Fix burners that won't ignite or have uneven flames with this gas range valve and burner assembly. Controls gas flow and flame intensity for each burner.

Fix burners that won't light, adjust, or maintain flame. This valve regulates gas flow to individual cooktop burners. Moderate DIY repair with hand tools.

Burner won't light or flame is uneven? This gas range burner valve controls gas flow to restore reliable ignition and consistent flame on your stovetop.

Fix a burner that won't turn off or has a stiff knob with this gas range burner valve. Controls gas flow to individual burners. DIY repair takes 1-2 hours.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

Fix water leaks or no water flow in your range. This dual valve tube controls water delivery through your appliance's tubing assembly. Direct fit part.

Burner won't light or flame is weak or uneven? This injector assembly meters gas flow from the manifold to restore proper ignition and stable flame.

90° elbow assembly redirects fluid or discharge lines at a right angle on your gas range. Replace if cracked, broken, or worn to restore secure connections.

90-degree elbow assembly for gas ranges. Connects gas supply lines at right angles. Replace if cracked, damaged, or leaking to ensure proper gas flow.

90-degree elbow assembly that directs exhaust airflow through the oven ventilation path. Replaces cracked, damaged, or broken elbows to restore proper venting in your range.

Fix an oven that won't heat or takes too long to preheat with this gas range oven igniter glow bar. Common DIY repair, moderate difficulty.

Range not heating properly or gas flow issues? This dual safety valve controls gas to two burners, restoring safe operation. Moderate DIY repair.

Fix an oven that won't heat or takes too long to ignite. This glowbar igniter generates the pilot flame for your gas range's bake burner. DIY-friendly repair.

Oven won't heat or takes forever to preheat? A faulty igniter is the most common cause. This hot surface igniter glows to light your gas burner reliably.

Gas leaking behind your range or burners won't shut off completely? The pressure regulator controls gas flow to safe levels. DIY-friendly repair.

Burner won't light or gas leaks? This safety valve controls gas flow to individual burners, restoring safe operation. Moderate DIY repair for gas ranges.