Parts for Ge GHDS835GD0MC: 05 - Gas Valve & Burner Assembly Parts

The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.

Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.

Symptoms of a bad flame sensor include:

• The dryer not heating or taking longer to dry clothes
• The dryer shutting off unexpectedly during a cycle
• The igniter glowing but not igniting the gas
• Error codes related to heating or ignition issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This gas dryer igniter assembly heats to a bright glow to light the burner so the dryer can produce heat. Replacing a cracked, weak, or non-glowing igniter restores reliable ignition and proper drying performance.

• Heats and ignites the gas at the burner to start the flame
• Restores drying heat when the original igniter is cracked or electrically open
• Common symptoms include: dryer runs but no heat, burner never lights, igniter does not glow, or extended dry times
• Visual damage such as white spots, breaks, or crumbling on the element indicates failure

• Disconnect power and shut off gas supply before servicing
• The igniter is brittle—handle only by the base or bracket; avoid touching the element with bare fingers
• Mount in the same position as the original and route leads away from heat and moving parts
• After reassembly, run a heat cycle to check the burner ignites; also check the flame sensor and gas valve coils

The LP Conversion Kit is an OEM part for GE dryers. This kit allows for the conversion of a natural gas dryer to operate on liquid propane (LP) gas. It includes all necessary components to ensure a safe and efficient conversion process, including a new orifice, regulator spring, and installation instructions.

Causes of needing a conversion kit can include moving to an area where only LP gas is available or preferring the use of LP gas over natural gas. Additionally, some users may find LP gas more economical or suitable for their specific needs and appliances.

Symptoms indicating a conversion is needed include:

• Moving to a location without natural gas service
• Preferring the use of LP gas for cost or availability reasons
• Acquiring a natural gas dryer when LP gas is the available fuel source

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.