Ge WH49X27616 Tub Cover Kit OEM Part

This is a stacked unit so it comes apart a little different. you DO NOT have to remove the dryer unit to remove the tub assembly.the top front cabinet brace is held on with 6 screws.remove this along with the suspension rods the tub assembly comes straight out the front of the machine. Do yourself a favor and take the whole assembly out of the machine before you disassemble the inner tub. I removed the drain pump before i took the tub out as a precaution. The worst part about this job was the inner tub was frozen to the transmission shaft. I tried everything, soaked it in penetrating oil for days, beat on it, heat from a torch careful not to melt anything, a jack between the trans shaft and a 2 by 4 wedged under the tub rim and then broke the 2 but not the tub. The only way to get this apart was to cut the center hub off the shaft. I used a 4 in angle grinder & cutoff wheel to make 4 cuts close to the center hub hammer n chisel its out, 2 more cuts on what's left and hammer n chisel it was off. This was glued on. The downside to this is you have to buy a whole new inner basket assembly. The hub is not sold by it self. $200-400.got 1 for $230.went back together easy n works great now. I hope this helps. GOOD LUCK.

By replacing it.

Ordered the parts from appliencepartspros, came in extremely fast for only 6 $. Perfect part, installed easy because it was a perfect fit.

Diagnosed problem. Parts came fast and was exactly the right parts and made my washer work like new again!