Parts for Ge AZ45E12EACW6: Grille & Control Parts

The Room Front Assembly is an OEM component specifically designed for GE window air conditioners. It forms the front protective covering and filter area.  

Located at the front interior of the AC unit, the assembly maintains proper airflow across the important evaporator coil and fan components. Its rectangular grille covers protective foam inserts and an easily removable washable filter.

Symptoms of a failing assembly include:

• Reduced or inconsistent cooling performance 
• Visible debris or moisture buildup within the interior 
• Loose screws or separation of assembly panels

Causes involve normal degradation of mounting hardware, weathering of protective foam, or damaged/dirty filter media over extended use. 

Replacement with this OEM GE part restores optimized interior ventilation and coil/fan access. Compatible units include select Frigidaire, Westinghouse, or Kenmore.

The Clip Room Front is an OEM part for GE air conditioners. This clip is responsible for securely attaching the front panel of the air conditioner to the main unit, ensuring a tight and stable fit.

A bad clip room front can be caused by damage, breakage, or misplacement of the clip. If you notice that the front panel of your air conditioner is loose, wobbly, or not properly secured, it may indicate a problem with the clip room front.

Symptoms of a bad clip room front include:

• Front panel not staying securely in place
• Visible gaps or misalignment between the front panel and the main unit
• Difficulty in removing or attaching the front panel
• Noises coming from the air conditioner

Replace your faulty clip room front with this genuine OEM part to ensure a proper and secure fit for your air conditioner's front panel. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Air Conditioner Filter Assembly is an OEM part compatible with GE air conditioning units. It is a crucial component responsible for capturing airborne particles, pollutants, and contaminants, ensuring that the air circulated through the system is clean and fresh.  It measures roughly 10.75” x 13.25”.

Symptoms of needing to replace the air conditioner filter assembly include:

• Reduced airflow or limited air circulation
• Visible accumulation of dirt or debris on the existing filter
• Unpleasant odors or musty smells from the air conditioning unit
• Increased strain on the system due to restricted airflow

Causes of a faulty filter assembly can include normal wear and tear over time, clogging due to excessive accumulation of particles, or physical damage due to improper handling or installation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore air conditioning models.

This louver air outlet is the exterior vent trim that directs and protects exhaust airflow from your appliance, restoring proper ventilation and a finished appearance. It snaps or screws into the cabinet vent opening for a clean fit. What it does:

• Directs appliance exhaust through the cabinet vent opening to help maintain proper airflow
• Protects the vent opening from large debris while allowing air to escape
• Replaces cracked, warped, or damaged vent trim that can cause air leaks or visible gaps
• Helps reduce visible lint buildup around the cabinet opening by restoring correct airflow path

• Disconnect power to the appliance before servicing and work in a well-ventilated area
• Remove the cabinet or access panel screws as needed to reach the vent opening; part secures with clips or screws depending on model
• Inspect the vent duct for lint or obstruction while replacing the trim and restore proper venting per manufacturer guidelines

The Capacitor is an OEM component specifically designed for GE window air conditioners. It plays a vital electrical role to ensure dependable compressor function. 

Located inside the outdoor unit, the capacitor stores and discharges electrical power to provide running and starting functions for the compressor. Proper capacitor performance enables a reliable cold air supply.

The causes of a bad capacitor relate to normal electromagnetic component aging over many seasons of use.

Symptoms include:

• Inability to power up or intermittent operation  
• Higher startup power consumption levels
• Buzzing noises coming from the outdoor unit

Replacing with this authentic GE OEM part restores optimized power handling. It supports continued cooling comfort and energy efficiency Compatible alternatives include select Frigidaire, Westinghouse, or Kenmore AC units.

This board support clip secures the appliance control board to the cabinet, keeping the board stable and protected during normal use. It prevents the board from shifting, rubbing, or contacting other components. What it does:

• Holds the control or electronic board in place to prevent movement and stress on connectors
• Helps avoid shorting or chafing by keeping the board separated from metal surfaces
• Reduces vibration-related noise and intermittent electrical contact
• Common replacement when the original clip is cracked, broken, or missing

• Disconnect power to the appliance before starting any repair
• Remove access panels and handle the control board by its edges to avoid damage
• Clip installs at the board mounting point(s); may require a screwdriver or pliers to remove the old clip
• If board mounting posts or surrounding plastic are damaged, inspect and replace those parts as needed for a secure fit

The Overlay Display is an OEM part compatible with GE air conditioning units. This component serves as the primary user interface, featuring a graphic overlay or panel that displays various settings, modes, and information to the user.

Symptoms of a faulty air conditioner overlay display include:

• Blank or incomplete display
• Unreadable information on the display
• Inaccurate display of temperature settings or operational modes
• Unresponsive or erratic touch inputs (if a touch panel)

Causes of a bad overlay display can stem from physical damage from impact or moisture exposure, electrical malfunctions, or simply normal wear and tear over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore air conditioner models. 

This UI jumper harness connects the oven or range control panel to the main control board so the user interface sends signals and receives power reliably. Replacing a damaged harness restores communication between the touch/display panel and the control electronics. What it does:

• Carries user inputs and display signals between the control panel and main control board
• Replaces worn, burnt, frayed, or corroded wiring that can cause intermittent or lost panel function
• Helps resolve symptoms such as a blank or unresponsive display, erratic touchpad behavior, or controls that sometimes stop working
• Preserves OEM connector fit and routing for straightforward replacement

• One UI jumper harness as shown

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Access usually requires removing the control panel or rear console; keep track of screws and clips
• Match connector shapes and pin counts; route harness to avoid sharp edges and heat sources
• Do not attempt repairs while the appliance is powered.

The User Interface Control Board is an OEM replacement part for GE air conditioning units. It acts as the central control system, allowing users to set desired temperatures, adjust fan speeds, and select various operational modes.

Symptoms of a faulty air conditioner user interface control board include:

• Unresponsive or erratic button inputs on the control panel
• Incorrect or garbled display readings for temperature or settings
• The air conditioner not responding to programmed settings or commands

Causes of a bad user interface control board can range from electrical malfunctions, power surges, physical damage from impact or moisture exposure, or simply normal wear and tear over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore air conditioner models. 

Replace a faulty temperature control with this thermostat kit for room air conditioners. It senses room temperature and cycles the compressor on and off to maintain the set temperature, restoring reliable cooling control and comfort.

• Monitors room temperature via a sensing bulb/capillary and responds to your dial setting
• Opens/closes internal contacts to start or stop the compressor at the setpoint
• Helps when the unit runs constantly or won't shut off, won't cool, short cycles, or the temperature doesn't match the setting
• Restores consistent, predictable cooling after a failed thermostat

• Unplug the unit before servicing; use proper protective gloves
• Note wire positions and transfer them one at a time to the new thermostat
• Route and secure the capillary/sensing bulb exactly as the original; avoid kinks and ensure firm contact in clips or bracket
• After reassembly, set to mid-range and test operation