Parts for Craftsman 358791980: Handle / Drive Shaft / Shield Parts

This part is a replacement throttle cable assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or malfunctioning throttle cable assembly in a variety of line trimmer models. This throttle cable assembly is a critical component that controls the speed of the engine. If this part is broken, stretched, snapped, or otherwise defective, the line trimmer may not be sufficiently controllable by the user. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle cable assembly, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this throttle cable assembly is suitable for use on several different models of line trimmers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement screw is OEM and has been directly sourced from the manufacturer. The screw is used in many machines, including lawnmowers, tractors, tillers, and other lawn and garden equipment.These screws will be subject to normal wear like any other part. They should be inspected every year before using the equipment for rust or to see if any have fallen out or broken off. If any extra motion from the deck or the engine is noticeable, check the screws to ensure they don't need to be tightened. Failure to do so can cause damage to the mower and cause other parts to need replacement. Before checking the screws, make sure the mower has cooled off enough to touch. Letting the mower cool for a couple of hours is best to avoid burns. The screws can be tightened with a screwdriver. The screw is a genuine OEM replacement part. It is designed to be used with Husqvarna, Craftsman, Troy-Bilt, Cub Cadet, Poulan, Mcculloch, and Jonsered machines.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This replacement part is a spring trigger and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This specific part is commonly found in trimmers or edgers. This spring helps create torque and assists the other parts of the appliance to run smoothly and efficiently. A new spring trigger might be needed if the current one is damaged or broken in any way such as being stripped or snapped due to normal wear and tear. If the user notices parts that are no longer working together, it could be because the spring is faulty. It is not unusual for this part to become damaged due to the nature of the spring. Be sure to reference the proper owner's manual before beginning this repair. This spring trigger is sold individually and is sourced directly from the manufacturer to ensure a proper fit. This is also and OEM replacement part.

This replacement part is a handle clamp. This is a genuine replacement part made by Husqvarna. This part works with the handle of many lawn mowers and is able to maintain the functions of the handle itself. A new handle clamp might be needed if the current one has become damaged. This can be due to normal wear and tear and should be replaced if this is the case. If the functions of the handle are no longer working properly, it might be due to a malfunctioning handle clamp. Work gloves are recommended to ensure safety during the repair job. Be sure the engine is completely shut down during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This drive shaft is a genuine Husqvarna part, sold individually. This drive shaft can be used as a replacement part in a string trimmer or an edger. The purpose of a drive shaft in a string trimmer or an edger is to transfer the power from the engine to the wheels.The drive shaft in a string trimmer or an edger might need to be replaced if the drive shaft cannot serve its typical function. This could occur if the drive shaft has suffered from damage as a result of general wear and tear with long-term use or due to a collision with a hard object. If this occurs, the drive shaft should be removed and replaced by this genuine OEM replacement part before using the lawn mower again in order to guarantee the safe use of the appliance.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This drive shaft is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This shield kit is a genuine Husqvarna part, sold individually. This shield kit can be used as a replacement part in a string trimmer. The purpose of the shield kit in a string trimmer is to protect the operator from flung debris.The shield kit in a string trimmer might have to be ordered as a complete replacement part in a shield or a guard that can no longer protect the operator from flung-up materials during the operation of the appliance. If the shield is sufficiently damaged in the form of puncturing, denting, warping, eroding, or other forms of damage to the point that the operator is no longer protected by it, the shield kit should be ordered as a genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shield kit is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This shield bracket is a genuine Husqvarna part, sold individually. This shield bracket can be used as a replacement part in a string trimmer. The purpose of a shield bracket in a string trimmer is to secure the shield so that flung debris can be safely kept away from the operator during use.The shield bracket in a string trimmer might eventually have to be replaced if it can no longer hold the shield firmly in place while the appliance is being operated. The shield bracket could be dented, punctured, scraped, warped, or eroded to the point that it cannot hold anything in place, and if this occurs, the shield bracket should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shield bracket is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This glide plate is compatible with a variety of Craftsman string trimmers for lawn and gardens. It attaches to the cutting head of the machine to ensure the cutting line is secure as it goes into the cutting head. This glide plate is made of durable plastic but regular use can cause wear and tear and the plate may become damaged. If the glide plate is knocked into other items, this can also damage it and prevent it from doing its job. If the glide plate needs to be replaced because it is damaged, cracked, or broken, the process is simple. First, make sure the string trimmer is turned off and place it on a level surface where work can be done. Reach down to the bottom where the part is located and slide it off of the machine. Once it has been removed, the new component can be installed in the opposite way. After installation, the trimmer can be used again.This is a genuine OEM replacement glide plate that is sold on an individual basis. The part is designed for use with several string trimmers by Craftsman.