Parts for Whirlpool WVU37UC6FB0: Hood Parts

Replacement transformer that provides low-voltage power to the appliance control system, restoring reliable power to the control board and display. Use when the appliance is unresponsive or shows blank/noisy controls due to a failed transformer. What it does:

• Supplies the low-voltage power required by the control board and user interface.
• Enables control panel functions, displays, and relays that rely on the transformer.
• Common symptom: blank display or no response from touch/pressed controls.
• Also may cause intermittent operation or failure of electrically-driven features when faulty.

• Disconnect power (unplug or shut off breaker) before starting any work.
• Replace with the exact part number; match to the appliance wiring and mounting.
• Observe proper wiring, polarity, and secure connections; do not work on wet surfaces.

The Light is an OEM component specifically designed for Whirlpool range hoods. It illuminates the cooktop below, aiding visibility during food preparation. A properly functioning light also improves the overall appearance of the range hood.

Causes of a bad light can include normal wear over time, and failure of internal filaments or ballasts due to continuous use. Excessive heat exposure may also degrade lighting components more rapidly. 

Symptoms of a bad light include:

• Dim or unlit illumination from the hood 
• Flickering or inconsistent operation
• Broken or missing lens cover/housing

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A replacement console push button that restores tactile control of your appliance's front panel. Fits as a direct-replacement user interface button so you can select cycles and options with a responsive, secure press. What it does:

• Replaces a worn, cracked, or non-responsive console push button
• Restores tactile feedback and reliable selection of cycle settings
• Helps fix symptoms like buttons that stick, don't register presses, or fall out
• Reinstalls into the existing control panel—no electronic board required

• Disconnect power before beginning any service to avoid shock or injury
• This part typically snaps into the control panel; gentle prying may be required to remove the old button
• Keep small screws and clips organized during disassembly; test button operation before reassembling fully
• If button malfunction persists, inspect underlying switch or control board for damage

This fan motor moves air through the appliance to support proper ventilation and cooling. Restoring a worn or failing fan motor helps reduce overheating and ensures components receive steady airflow. What it does:

• Spins the blower to circulate air across heating and cooling components
• Helps prevent overheating and supports consistent operating temperature
• Supports proper performance during normal cycles that require ventilation

• Disconnect power before starting any repair to avoid electrical shock
• Handle the motor and fan blades carefully; avoid bending blades or damaging the mounting shaft
• Verify mounting orientation and wiring match the original before reconnecting power

A replacement hood damper assembly that opens and closes the vent opening to help direct exhaust airflow and reduce backdrafts when the range hood or microwave fan is off. Restores proper vent operation and helps control odors and smoke. What it does:

• Opens to allow exhaust air to escape when the hood fan runs
• Closes to block outside air and reduce backdrafts when the fan is off
• Helps improve ventilation performance and reduces kitchen odors and smoke build-up
• Commonly replaced when the damper is stuck, bent, or noisy

• One hood damper assembly

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing the hood or microwave bottom panel; support the unit if needed
• Verify damper orientation and secure mounting fasteners; test operation before reassembly

The Filter is an OEM replacement part for Whirlpool range hoods. It helps to keep your kitchen clean and free from grease and odors. It captures and traps grease particles, preventing them from circulating in the air and accumulating on surfaces.

A bad grease filter can occur due to regular use and buildup of grease, or if it becomes damaged or clogged. If you notice symptoms such as a persistent greasy smell in your kitchen, reduced suction power, or visible grease buildup on the filter, it may be time to replace it.

Symptoms of a bad grease filter include:

• Persistent greasy smell in the kitchen
• Reduced suction power
• Visible grease buildup on the filter

Maintain a clean and odor-free kitchen environment by replacing the worn-out or clogged grease filter with this genuine OEM part.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Filter is an OEM component specifically designed for Whirlpool range hoods. Located inside the range hood above the cooktop, the filter works to trap grease, odor, and other particles from extracted air before venting it outside. It plays an essential role in keeping indoor air clean and hood surfaces grease-free. 

Causes of a bad filter can include excess grease build-up that clogs the filter mesh or damage from high heat that weakens the material. Over time, recovered particles and residue diminish the filter's effectiveness.

Symptoms of a bad filter include:

• Reduced or ineffective ventilation while cooking  
• Greasy residue accumulating on nearby cabinet surfaces
• Unpleasant cooking odors seeping into other rooms
• The need to frequently clean harder surfaces in the range hood

For optimum performance and safety, filters require regular replacement. This Whirlpool OEM filter is compatible with range hoods from Maytag, Jenn-Air, Amana, Magic Chef, and more. 
 

This replacement refrigerator water filter cartridge traps common impurities to help keep drinking water and ice tasting clean and clear. Designed as a direct-fit service part to restore proper filtration in compatible refrigerators. What it does:

• Reduces chlorine taste and odor for better-tasting water and ice
• Captures sediment and particulate that can discolor water or clog dispensers
• Helps protect water lines and dispenser components from debris
• Commonly replaced when flow slows or water/ice taste changes

• One replacement refrigerator water filter cartridge

• Replace according to your refrigerator's owner manual; run several gallons of water through the dispenser after installation to flush the system
• Turn off water supply or follow manufacturer's shut-off instructions before removing the old filter
• Use only approved replacement filters for your model; improper parts may cause leaks or performance issues
• Dispose of the used filter per local recycling or waste regulations

This replacement power cord provides the electrical connection that supplies your appliance with mains power. It restores safe, reliable power delivery so your appliance can operate normally. What it does:

• Replaces a damaged or missing power cord to restore electrical connection
• Helps address symptoms like no power, intermittent power, or visible cord damage
• Maintains the appliance's grounded connection when matched to the original cord
• Routes power from the wall outlet to the appliance's inlet or terminal block

• One replacement power cord

• Disconnect power at the breaker or unplug the appliance before starting work
• Route the cord and secure strain relief/fasteners per the appliance's service instructions

This genuine replacement refrigerator water filter cartridge improves water and ice taste by removing common impurities and particulates. Fits inline into the refrigerator's water system to restore conditioned water flow and quality. What it does:

• Reduces common taste and odor issues caused by chlorine and other common contaminants
• Helps prevent particulates from reaching the dispenser and icemaker
• Restores proper filtered water flow when the original filter becomes clogged or expired
• Supports clear, better-tasting ice and drinking water

• Turn off the refrigerator water supply or follow the manufacturer's recommended shutoff procedure before removing the old filter.
• Replace by following the refrigerator manufacturer's removal and insertion instructions; push/rotate to secure depending on model.
• After installation, run several cups of water through the dispenser to flush air and any loose carbon fines.
• Dispose of the used filter per local regulations.

This hood damper is the backdraft flap in the exhaust outlet. It opens when the blower runs to vent air outside and closes when off to help block outside drafts, odors, and pests from entering.

• Controls airflow from the blower to the duct during ventilation
• Closes when off to reduce backdrafts and outside air intrusion
• Helps maintain effective capture of smoke, steam, and odors
• Typical symptoms: drafts through the vent, flapping/rattling noises, poor venting, or a broken/missing flap

• Disconnect power; if vented, support or disconnect ducting as needed
• Access the exhaust outlet and remove the damaged damper
• Install with arrow/hinge oriented for airflow; the flap moves freely without binding
• Reassemble ductwork, restore power, and test the fan on all speeds

A replacement mounting plate that secures internal components and restores proper alignment in compatible Whirlpool appliances. Helps stop rattling and loose parts so the appliance runs more quietly and reliably. What it does:

• Secures and supports internal assemblies to maintain correct positioning
• Prevents vibration and rattling caused by a damaged or bent plate
• Helps maintain proper clearance so moving parts operate without interference
• Restores stable fit when the original plate is cracked, warped, or corroded

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove the appropriate access panel or trim to reach the plate; keep track of fasteners
• Use basic hand tools; avoid over-tightening screws to prevent distortion