Parts for Craftsman CMXGMAM2703840: Lawn Mower Parts

This replacement part is an air filter, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This air filter is typically found in riding lawn mowers and is responsible for filtering out air from the engine. This air filter is able to catch dust and debris so that the engine of the lawn mower is kept in proper working order. A new air filter might be needed if the current one is full of debris or is visibly clogged. It is recommended that the air filter be replaced once per season or after about 300 hours of use. If the user notices that the air filter is dusty, it is recommended it be cleaned. This air filter is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually. Be sure the engine is powered down before replacing this part.

This 21-inch extreme blade is an OEM replacement part for select lawn mowers. Routine blade maintenance is an important part of owning a lawnmower. With regular sharpening and care, this durable blade made of high-quality metal should last for a long time. However, the blade can still become dull with regular use or damaged by hitting concrete or other objects. If the cutting as it should, replace it immediately for safety and effective operation. This OEM blade offers a greater cutting surface and extreme cutting power for compatible machines. Installing the blade is simple and only requires a wrench. Disconnect the spark plug for safety before accessing the mower deck. Always wear gloves when working on blades or engine components. This extreme blade replacement is designed for use with various MTD lawnmowers, as well as models from Troy-Bilt, Yard Machines, Yard-Man, and Craftsman. This blade is sold individually.

This blade adapter is made to attach a lawn mower cutting blade to the drive shaft of a push mower. Though it is made of sturdy metal and is tightly fastened to the mower's drive, the adapter and blade may wear and loosen over time. This can present a dangerous situation as well as poor cutting performance for the blade. Also, each adapter has a small insert tab that fits into the blade attachment. This tab, called a “key,” is actually a shear pin. Should the blade strike a solid object, the key will sheer off, preventing the blade from coming loose or suffering irreparable damage. The solution to either of these problems is to replace the blade adapter. The blade itself should be closely examined to make sure it fits the new adapter with no wobble or slack. To replace the blade adapter, turn the mower on its side with the air filter on top. Use a ratchet to remove the bolt that attaches the blade and adapter to the drive shaft. Make certain to fit the new adapter key into the keyway on the shaft. Always use a replacement part like this one, that is OEM certified to be identical to the original. This blade adapter is compatible with Ryobi, Yard Machines, Yard Man, Huskee, Cub Cadet, Troy-Bilt, MTD, and Bolens mowers.

This replacement part is a hex bolt. It is a genuine replacement part made by MTD. Hex bolts are named because they are shaped like a hexagon and are different from the regular circle-shaped bolts. These parts are able to hold other parts secure and in place so that everything can operate as needed. A new hex bolt might be needed if the current ones are damaged in any way. It is possible that these bolts become stripped or lodged in place over time due to normal wear and tear and should be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous part is stuck. Be sure the engine is completely powered down before beginning this repair. This bolt is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement chute is an authentic OEM part for a lawn mower. The chute attaches to the side of a lawn mower, and as the blade cuts grass, it pushes the clippings towards the chute. The chute then sprays grass towards the back and side of the mower. These clippings can be left as nutrient rich compost for the lawn or the operator can go around and pick up the clippings for a stately, professional look. Chutes are made of a durable reinforced plastic, but because they are attached on the outside of the mower and protrude to the side, they can easily be rammed into trees, walls, and other obstacles. If hit too hard, the chute will tear off and grass will spray unevenly across the lawn. Fortunately, chutes are easy to replace. This repair will only require a socket wrench for disassembly and reassembly. As a top-quality replacement part, this chute comes sourced directly from the original manufacturer. It is compatible with Craftsman and Troy-Bilt lawn mowers. This part does not include any of the hardware required for assembly. Therefore, be sure to not lose the bolts removed during disassembly.

This replacement part is a fuel cap intended for use with lawn mowers. This cap seals the fuel tank to ensure there are no leaks and that fuel is not contaminated.If the fuel tank is leaking during use, the cap may be damaged. If the cap has been bent or cracked, or if the cap's threading has stripped, this part should be replaced as soon as possible.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This grass catcher frame holds the grass-catching bag, which captures grass clippings for compost or simply to remove yard waste. Bagging rather than mulching allows grass to get higher and thicker without putting added stress on the mower. The internal grass catchers frame can become bent and not suitable for further use, making it impossible to bag clippings until it is replaced. This OEM replacement handle is the answer for mowers made by these manufacturers: Bolens, Murray, Mastercut, Troy-Bilt, Yard Machines, Craftsman, Yard-Man, and Cub Cadet. This OEM part is sold individually.

This is a genuine replacement for select walk-behind push lawn mowers. The hinged mulch cover is designed to replace the clippings chute that allows discharge so that the grass is more finely mulched in the machine. This part includes a metal hinge, which can break or snap over time. The plastic itself can also become damaged by debris or impacts, or simply crack due to age. Replacing the mulch cover with a genuine OEM model like this can be the ideal solution. If the cover is not replaced, the mulching feature will not be able to be used. This OEM replacement mulching cover is compatible with lawn mowers from MTD, Yard Machines, Yard Man, Troy-Bilt, Cub Cadet, Bolens, and Husky. This product includes the metal bracket and spring that are required for installation and securing the cover, sold as a single assembly. This hinged mulching cover can be used with 150+ lawn mowers from the brands listed above. No tools are required for this part replacement but it is important to be careful of pinch injuries when working with parts like this spring-hinged cover.

The spark plug takes in power from the battery and generates the spark that will keep the combustion engine running. Spark plugs need to be replaced annually as a part of regular maintenance. In the event that the engine is not idling correctly or keeps stopping and starting, the spark plug may need to be replaced immediately. This is a simple replacement that involves removing the spark plug boot and taking out the old plug, then screwing in the new plug, and replacing the boot. The spark plug requires an open-ended wrench or special spark plug socket to replace. This OEM spark plug replacement is made by MTD and is compatible with edgers, lawnmowers, log splitters, trimmers, and other garden engines. It can be used on compatible Craftsman, Cub Cadet, and MTD engines. This unit is sold as a single plug.

Designed for comfortable mowing, this trail shield attaches to walk-behind lawnmowers. It secures to the back of the deck on the lawnmower and prevents grass and other debris from reaching the person using the mower. This trail shield is made of durable plastic but can become damaged use. If it is broken, it will not be able to keep grass from collecting behind the mower deck, so it will need to be replaced.To replace the part with a new shield, put the lawnmower on a stable surface and ensure it is powered off. On the original trail shield, find the metal clasps that hold it secure. Unclasp each of these and remove the trail shield from the lawnmower. The new replacement part can be attached and the lawnmower will operate correctly.This trail shield is an authentic OEM replacement part that is directly sourced from the manufacturer. It is an individual component and does not come with hardware. The part is compatible with lawnmowers by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Troy-Bilt, Huskee, Murray, MTC, and Yard Machines.

This replacement part is a wheel intended for use in lawn equipment. This is a genuine replacement part made by MTD. Wheels are an important part in this appliance as they allow the user to move the machine with ease and precision. Many different appliances are made to be easily transported and moved around, and these wheels make that possible. A new wheel might be needed if the current ones are worn down or broken in any way. It is not unusual for this part to require replacement after years of normal use as the wheels might lose traction overtime. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is suggested that the user refer to the reference guide for directions on how to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.