Parts for Oem-Attachments 19A40024OEM / 2015: Lift Assembly Parts

This bumper assembly is a genuine MTD part, sold individually. This bumper assembly can be used as a replacement part in a lawn mower. The purpose of the bumper assembly in a lawn mower is to cover and protect the front area of the appliance, protecting it from impact.If the bumper assembly is sufficiently damaged at some point within the typical lifespan of the lawn mower, it should be removed and replaced by this genuine OEM replacement part. The bumper assembly should be replaced in accordance with a relevant set of instructions sourced from an appliance manual that correlates to the make and model of the lawn mower in question.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This bumper assembly is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

This is a genuine replacement self-tapping hex screw with a blunt nose designed for lawn mowers and lawn tractors. It is used in a variety of locations for the engine assembly of lawn mowers. The self-tapping feature allows the metal screw threads to tightly secure to other metal. The blunt nose requires the use of a pre-drilled pilot hole smaller than the diameter of the screw. These screws do not interchange well. Be sure to check the owner's manual to ensure the correct part number. The hex head needs a socket wrench for the easiest removal and replacement. When removing this type of screw, stripped threads can occur. If this happens, use a screw of the same type in a slightly larger size to accommodate for the damage. Typically, this type of screw would need to be replaced when removed to access another part of the lawn mower for replacement, such as the carburetor. This an OEM part sourced directly from the manufacturer and is sold individually. This screw fits products by Bolens, Brute, Columbia, County Line, Craftsman, Cub Cadet, Huskee, Huskee Supreme, MTD Black, MTD Gold, Mastercut, Murray, Troy Bilt, Yard Man, & Yard Machines.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

This bow tie cotter pin is a genuine MTD part, sold individually. This bow tie cotter pin can be used as a replacement part in a lawn mower. The purpose of the bow tie cotter pin is to serve as a fastening part for one or more components of the lawn mower.This component is small and can be easily lost or misplaced. It can also be stripped or subject to other forms of damage as a result of general wear and tear from long-term use of the appliance. If the component is lost, misplaced, or damaged to the point that it can no longer serve as a fastening part, the bow tie cotter pin should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bow tie cotter pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Murray, Yard Machines, and Cub Cadet.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This replacement part is a flat washer, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. A flat washer is found in many types of appliances and machinery in general. Typically washers are used to increase the size of any screw's bearing surface area. This in turn reduces the surface pressure applied on the object and allows the entire machine to run smoothly and efficiently. A new washer might be needed if the user notices that the current ones are damaged or missing. Because pressure is often put on the washers it is common that they become stripped overtime. Be sure to purchase the correct amount as many different machines require more than one washers. Be sure to reference the owner's manual for more specific information on how to replace the parts. This is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually.

This replacement part is a shoulder screw. This part is small but very important in various types of appliances. Shoulder screws are able to work with other small parts such as nuts or washers to ensure that pieces in the machine are held together securely during use.Overtightened screws might be stripped and could fall out or get stuck in place, necessitating replacement. Over time, exposure to the elements may lead to a screw becoming worn or corroded, which may cause it to break or get stuck.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.