Parts for Frigidaire FLCE7523AW0: Motor / Blower / Belt|Bflce7523aw0.Svg Parts

This blower wheel mounts to the fan motor and spins to move air through the appliance's ventilation path. Replacing a cracked, warped, or clogged wheel restores smooth airflow and helps reduce noise from the fan area.

• Attaches to the fan motor to pull/push air through the unit's vent/cooling system
• Helps maintain proper airflow for venting and component cooling
• Common symptoms: loud rattling or scraping near the fan, vibration, or weak airflow
• Visible issues may include broken/missing fins, a cracked hub, or heavy debris buildup

• Disconnect power before servicing; internal areas can have sharp edges
• Access the blower housing and note blade orientation/rotation for correct reinstallation
• If present, transfer/reuse the existing hub clip or retainer from the original wheel
• Clear debris and the wheel spins freely without rubbing before reassembly

This small replacement clip secures trim, panels or wiring in place to restore proper alignment and prevent rattling. It provides a simple, durable hold so existing components stay seated and operate quietly. What it does:

• Retains and secures appliance trim, panels, or wiring harnesses to prevent movement and noise
• Helps maintain proper panel alignment and spacing for doors or access panels
• Restores the original fastening where a broken or missing clip allows parts to shift
• Commonly used where a spring or snap-fit fastener is required

• Designed for snap-in installation; position and press until it clicks into place
• Use appropriate tools to access the mounting area and avoid damaging surrounding trim
• Disconnect power before working near electrical components or wiring

The Motor Mounting Clamp is an OEM part for Frigidaire dryers. This clamp secures the motor in place within the dryer, ensuring it operates smoothly and remains stable during the drying cycles. The motor mounting clamp is essential for maintaining the proper alignment and function of the dryer motor.

Over time, the motor mounting clamp can become worn out or damaged due to constant vibration and movement. Accidental impacts or mishandling during maintenance can also cause the clamp to fail, leading to motor misalignment or instability.

Symptoms of a bad motor mounting clamp include:

• Excessive noise or vibration during the drying cycle
• Motor shifting or moving within the dryer
• Reduced drying efficiency
• The dryer not starting or stopping abruptly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

No.8 pan head `10 - 10b x 0.50 `cr/sq drive

This mounting bracket secures and supports appliance panels and internal components, restoring proper alignment and stable operation. It's a simple replacement that helps eliminate loose panels and rattling. What it does

• Provides a secure anchor point to hold panels, rails, or assemblies in place
• Restores correct alignment to doors or access panels when a bracket is broken or bent
• Reduces vibration and rattling caused by a loose or missing support
• Matches OEM fit and function for straightforward replacement

• One mounting bracket

• Disconnect power and, if applicable, water before starting any repair
• Inspect surrounding parts and fasteners; replace any damaged screws or clips
• Use appropriate tools and fasteners for a secure installation; avoid overtightening
• Handle sharp edges carefully and test panel alignment after installation

This screw is a direct-replacement fastener used to secure appliance panels and components. It provides a simple, reliable fix when a missing or damaged screw lets parts sit loose or vibrate. What it does:

• Secures service panels, trim pieces, brackets, or small components
• Restores proper fit and alignment to reduce rattling or movement
• Replaces stripped, missing, or corroded screws to maintain safe assembly
• Works wherever the OEM screw specification is required for reliable fastening

• Use the correct driver bit and turn gently to avoid stripping the head
• Ensure mating threads are clean and aligned before tightening
• Tighten until snug; do not over-torque to prevent damage to threads or parts
• Disconnect power before working near electrical components or controls

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

This replacement screw secures appliance components and restores proper fastening where a stripped, missing, or damaged fastener causes loose panels or parts. Use it to secure trim, brackets, or internal assemblies for a stable repair. What it does

• Provides a secure attachment point for panels, brackets, or component mounts
• Replaces missing, corroded, or damaged screws that cause rattling or loose parts
• Helps stop movement that can lead to misalignment or wear on adjacent parts
• Supports reliable reassembly after repair or maintenance

• Use the matching screw size and driver to avoid stripping the head or threads
• Tighten until snug; avoid over-torquing which can crack plastic or strip threads
• Disconnect power and follow appliance safety procedures before working on internal parts
• If threads are damaged, replace the mating nut or tapped hole as needed for a secure fit

A small OEM fastener used to secure appliance panels and components. Replaces worn or missing screws to restore proper fit and reduce rattling or loose parts for safer, quieter operation. What it does:

• Secures panels, trim, brackets or internal components in place.
• Prevents vibration and noise caused by loose hardware.
• Helps maintain proper alignment of removable parts.
• Restores a secure connection when original screw is stripped, lost, or damaged.

• Disconnect power and water before servicing the appliance.
• Use the correct screwdriver or bit to avoid stripping the head.
• Tighten until snug; avoid over-tightening to prevent damage to threads or parts.
• Replace with the exact screw type and length for proper fit and function.

Hex washer head ,10-32 x 0.375. Ground