Motor

• Noisy
• Fridge too warm
• Doesn't shut off

Removed the old fan housing. Removed the fan from its housing and took the fan blade off. I then smelled the fan and it smelt of burnt insulation. I ordered a new fan and re-assembled in reverse order. Fan started up when compressor fired up. Fan was a plug & play item. Erroe Code cleared on the front and refrig is working fine. Only thing was the fan was not identical with the old one. It fit in the enclosure the same and the shaft was the same length. My old fan was 10 years old and they... Read more

The motor hummed but the fan didn't turn. Clearly the brushes were burned out. I ordered a new fan, although I had to talk to a human at ApplianceParts because my model was not listed. The part was a perfect fit. The only problem is determining how to remove the over to reach the back, no instructions anywhere online. But trial and error eventually worked. You absolutely need a nut-driver that fits the hex head screws on the oven to remove panels covering the motor, but a cheap... Read more

• Noisy

I opened up the microwave where the noise was coming from. I searched the web to confirm this part could be failing and found the part name and number on appliancepartspros.com. I ordered the part on Monday and it was in my mailbox 2 days later. Two screws and two wire connectors later and the old one was out. I installed the replacement part and everything worked great, no more grinding noise. Read more

I took the advice of another buyer and replaced the magnetron, capacitor, and diode from my microwave (make sure you discharge the capacitor). It was not a problem at all to do, I did find an excellent video on YouTube on how to test all of these components and almost anything else in a microwave. It’s called Microwave Oven Troubleshooting in Minutes- Step by Step by electronicsNmore. It was the best thing I watched. Turns out my magnetron was the only thing that was bad and it’s the most... Read more

• Ice maker won't dispense ice

Replace motor, 10 minute fix. No problems! Read more

Ordered the parts from you guys, evaporator fan motor, fan blade, and new grommets. unscrewed the inside back panel of the freezer, removed the old fan, installed the new one. Read more

Found bad motor, Not able to repair so ordered new. Came supper fast and was able to install in about 30 minutes. Only needed a square drive #2 scewerdriver and 5/16" socket wrench to do the job. Verry easy. Read more

I replaced the exhaust fan. It works like a brand new machine now. Read more

Replace evaporator fan motor. Read more

Replace condenser motor Read more