Parts for Ge GPT145SSL0SS: Motor-Pump Mechanism Parts

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

The Wash Pump Assembly is an OEM part for GE dishwashers. As the component responsible for circulating water through the wash system, the wash pump plays a vital role in cleaning dishes effectively. 

Symptoms of a bad wash pump include:

• Incomplete or insufficient cleaning even on high heat cycles  
• Lack of water pressure through the spray arms
• Uneven wetting or saturation of dishes
• Strange sounds or vibrations coming from the tub area

Causes of wash pump failure can be mineral buildup clogging internal parts, worn-out motor brushes creating inefficient operation, or damage from debris entering openings in the pump body.

This genuine GE part is compatible with select Hotpoint, RCA, and some Kenmore models also.

This replacement screw secures panels and internal components on compatible GE appliances, restoring proper fit and eliminating loose or rattling parts. It's a simple, direct replacement when a mounting screw is missing or damaged. What it does:

• Fastens panels, brackets, or covers to maintain appliance stability and alignment
• Stops rattling or vibration caused by missing or stripped screws
• Keeps electrical and mechanical components properly seated
• Restores a secure, finished appearance to the appliance exterior or interior

• One replacement screw as shown

• Unplug the appliance or shut off power at the breaker before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten snugly but do not overtighten to prevent thread or component damage
• Keep removed fasteners organized to ensure correct reassembly

This turbidity sensor measures how cloudy the dishwasher wash water is so the machine can adjust cycle length and cleaning intensity for better results. It replaces a failed or intermittent sensor to restore proper soil detection. What it does:

• Detects cloudiness/soil level in dishwasher wash water to inform cycle controls
• Helps the washer lengthen or shorten cycles based on detected soil levels
• Commonly replaced when the dishwasher runs unusually long, cleans poorly, or loses soil-sensing function
• Works as the electrical sensor module that sends signals to the control board

• One turbidity sensor assembly

• Disconnect power and water supply before accessing internal components
• Handle the sensor carefully; avoid touching the sensing surface and wiring pins
• Ensure connector is fully seated and any mounting grommets or clips are returned to their original position

The DRAIN PUMP ASM is an OEM component specifically designed for GE dishwashers. It is responsible for efficiently draining water from the dishwasher tub at the end of each cycle. 

Causes of a bad drain pump assembly can include a buildup of debris that causes clogs or hinders pump operation. Seals and gaskets may also deteriorate over time.

Symptoms of a bad drain pump assembly include: 

• Slow or incomplete draining of water at the end of cycles
• Puddles or standing water left in the bottom of the tub
• Strange noises or vibrations coming from the pump area
• Error codes related to draining issues

Proper drainage is essential for dishwasher performance and safety. Replacing the drain pump assembly with this genuine GE part helps restore thorough draining and ensures your dishwasher runs as intended.

This OEM GE replacement part is also compatible with some Hotpoint, RCA, and Kenmore dishwasher models.

This dishwasher hose clamp secures a hose to its fitting to maintain a tight, watertight connection. Replacing a fatigued clamp helps stop leaks and keeps water moving reliably during fill and drain cycles. What it does:

• Secures hose-to-fitting connections at the pump, sump, or inlet/outlet
• Maintains a tight seal to help prevent drips and leaks
• Replaces a clamp that has lost tension, corroded, or broken

• 1 hose clamp

• Disconnect power and turn off the water supply before servicing
• Access point varies by model; remove the toe-kick and/or pull the unit forward as needed; place a towel to catch residual water
• Relieve/loosen the old clamp, fully seat the hose on the fitting, position the clamp behind the fitting barb, and secure
• Use the appropriate tool for your clamp style and run a short test to check for leaks

This dishwasher hose clamp secures a hose to its fitting to maintain a tight, watertight connection. Replacing a fatigued clamp helps stop leaks and keeps water moving reliably during fill and drain cycles. What it does:

• Secures hose-to-fitting connections at the pump, sump, or inlet/outlet
• Maintains a tight seal to help prevent drips and leaks
• Replaces a clamp that has lost tension, corroded, or broken

• 1 hose clamp

• Disconnect power and turn off the water supply before servicing
• Access point varies by model; remove the toe-kick and/or pull the unit forward as needed; place a towel to catch residual water
• Relieve/loosen the old clamp, fully seat the hose on the fitting, position the clamp behind the fitting barb, and secure
• Use the appropriate tool for your clamp style and run a short test to check for leaks

This wash pump hanger is the replacement bracket that secures the dishwasher wash pump/motor assembly to the tub, keeping the pump aligned for reliable draining and quiet operation. Restores proper support and fit after a damaged or broken hanger. What it does:

• Holds the wash pump/motor assembly in place to maintain correct alignment and position
• Helps prevent pump movement that can cause vibration or increased noise during a cycle
• Reduces the risk of leaks by keeping the pump sealed and properly seated
• Can address symptoms such as unusual pump noise, intermittent drainage issues, or a loose-feeling pump assembly

• Disconnect power to the appliance before any service
• Support the pump assembly before removing the old hanger to avoid stress on hoses and seals
• Inspect surrounding seals, gaskets and fasteners during replacement and replace if damaged

This rubber sump port plug gasket seals the washer's sump port plug to help prevent leaks and keep wash water contained. It replaces a worn or damaged gasket to restore a watertight seal at the sump access. What it does:

• Forms a tight seal around the sump port plug to stop water from leaking under the washer
• Helps prevent puddling and water damage caused by a deteriorated gasket
• Restores proper sump sealing after service or plug replacement
• Can reduce moisture-related odors by keeping the sump area contained

• Disconnect power and turn off the water supply before starting any repair
• Access the sump area per your model's service instructions (remove panels as needed)
• Remove the old gasket from the sump port plug and press the new gasket into place, ensuring an even, gap-free fit
• Reassemble panels and restore power/water, then run a short cycle and inspect for leaks

This clamp kit replaces worn Piranha-style clamps used in the dishwasher's wash system. Restores a tight, reliable seal on internal connections to help prevent leaks and maintain proper water circulation for consistent cleaning results.

• Secures internal hose and pump connections within the wash system
• Helps stop water leaks caused by loose, stretched, or damaged clamps
• Supports proper circulation and wash performance by keeping joints sealed
• Common symptoms: water under the unit, drips at hose joints, loose connections, vibration or rattling from the sump area

• Disconnect power and shut off the water supply before servicing
• Access the sump/pump area from the front toe-kick or by pulling the unit out as needed
• Replace one connection at a time; position and fully seat the new clamp(s) on clean hose/barb surfaces
• Restore power/water and run a short cycle to check carefully for leaks before reinstalling panels

This sump port plug seals the washer's sump/drain opening to stop leaks and keep internal components protected. It restores a watertight closure at the sump port so the appliance can operate without water escaping. What it does:

• Seals the sump or drain port to prevent water leaks from the washer tub area
• Helps maintain proper water containment during fill and wash cycles
• Keeps debris and contaminants out of the sump cavity
• Useful when replacing a damaged, cracked, or missing sump port cap

• One sump port plug

• Designed to press/seat into the sump port; verify seating for a snug, leak-free fit
• Inspect mating surface for debris or damage before installing to ensure a proper seal
• Disconnect power and water supply before accessing internal components

This dishwasher fine filter sits beneath the lower spray arm and screens food particles before water is recirculated. Replacing a torn, warped, or clogged screen helps maintain cleaning performance and protects the circulation pump and spray system from debris. What it does:

• Screens fine food soils in the sump to help prevent recirculation during wash and rinse
• Helps protect the circulation pump and spray arms from debris
• Helps if dishes have gritty residue or soil redeposit after cycles
• Helps if the existing filter is torn, warped, or missing

• 1 fine filter

• Disconnect power at the breaker before servicing
• Remove the lower rack; remove the lower spray arm if required for access
• Rotate and lift out the old fine filter; clear any debris from the sump
• Seat the new filter flat and rotate to lock; reinstall any ultrafine filter

Keep your dishwasher's pump protected. This glass trap sits in the sump and captures broken glass and large debris before it reaches the wash motor and spray system, helping maintain water flow and consistent cleaning performance.

• Traps shards and hard debris in the sump to protect the wash motor and pump
• Helps maintain proper water circulation and spray pressure
• A clogged or damaged trap can cause poor cleaning or grit left on dishes
• Grinding or rattling from the sump area may indicate debris in a compromised trap
• If the trap won't seat or lock, debris can bypass filtration

• Disconnect power and water; wear cut-resistant gloves to handle broken glass and sharp debris
• Remove the lower rack and, the lower spray arm; unlock and lift out the old trap
• Clear all debris from the sump; inspect sealing surfaces and nearby filter components
• Seat the new trap fully and lock it in place; reassemble and run a quick test for proper operation

This lower spray arm circulates and directs wash water to clean dishes on the bottom rack, restoring spray coverage and helping improve cleaning performance. Easy to replace when the original arm is cracked, clogged, or not rotating. What it does:

• Directs pressurized water across the lower rack to remove food soil and detergent residue
• Replaces cracked, warped, clogged, or broken lower spray arms that reduce cleaning coverage
• Restores proper rotation and spray pattern when the original arm is not spinning or is leaking
• Helps reduce spotting and missed areas caused by uneven water distribution

• Always disconnect electrical power to the dishwasher before servicing.
• Remove the lower rack to access the spray arm; follow OEM removal steps for retaining nut or clip.
• Inspect the spray arm mounting post and bearing for debris before installing the new arm.
• Hand-tighten fittings and run a short rinse cycle to confirm proper rotation and sealing.

This plastic coarse filter traps large food particles and debris in the dishwasher's sump so dishes rinse more effectively and drain paths stay clearer. It's a simple replacement that helps maintain normal wash performance. What it does:

• Captures large food scraps and debris before they reach the pump and drain
• Helps prevent clogging that can cause poor wash results or standing water
• Works with the dishwasher's fine filter and pump assembly to maintain cleaning efficiency
• Reduces the chance of food redeposit on dishes when functioning correctly

• One plastic coarse filter

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove lower dish rack to access the filter area; lift out the old coarse filter and seat the new filter in the sump until it snaps into place
• Inspect and clean the surrounding filter area and fine filter when replacing to ensure a proper seal and performance
• Do not force parts; if the filter does not seat easily, check orientation and debris that may prevent proper installation

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

The Lower Spray Arm Base is an OEM replacement part for GE dishwashers. It serves as the mounting point inside the lower basket for the lower spray arm assembly to attach. Proper positioning of the spray arm base allows for uniform water coverage on the dishes below. 

Causes of a faulty spray arm base include cracks, deterioration, or breaks in the plastic mounting features from repeated cycle use.  

Symptoms of an improper or defective spray arm base are:

• Loose or unstable lower spray arm assembly
• Uneven cleaning results on lower basket dishes
• Leaks around the lower spray arm area
• Chipped or degraded plastic appearance

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This sump assembly collects and directs wash water to the pump so your dishwasher can drain and circulate properly. Replacing a damaged sump restores proper water flow and helps stop leaks or drainage failures. What it does:

• Houses and channels wash water from the tub to the drain/pump assembly
• Seals the tub bottom to prevent leaks caused by cracks or worn seals
• Enables the pump to maintain proper circulation and pressure for cleaning
• Resolve symptoms like water leaking under the dishwasher, failure to drain, or unusual pump noise

• Disconnect power to the appliance and shut off the water supply before beginning
• Installation typically requires removing the lower access panel and possibly the tub/shield; handle parts gently to avoid damaging seals
• Inspect and replace any gaskets or clamps as needed to ensure a watertight seal
• Test the dishwasher through a short cycle and check for leaks after installation

This rubber sump gasket seals the appliance sump to prevent water leaks and maintain proper draining. It restores a tight, dependable seal where the sump meets the tub or pump housing. What it does:

• Forms a watertight seal at the sump to stop leaks under the appliance
• Helps maintain correct drain flow by sealing the sump-to-pump/tub junction
• Commonly replaced when you see puddling, visible gasket damage, or persistent leaking
• Compatible when the original gasket is cracked, flattened, or deformed

• One sump gasket

• Disconnect power and turn off the water supply before starting any repair
• Inspect mating surfaces and clean away debris or residue before installing the new gasket
• Use basic hand tools; handle the gasket gently to avoid stretching or tearing
• Replace only with the matching part number for a proper fit and seal

This upper spray nozzle directs water from the dishwasher's upper spray arm to help distribute rinse and wash cycles for better cleaning coverage. Replaces a worn, clogged or damaged nozzle to restore targeted spray from the upper assembly. What it does:

• Directs water flow from the upper spray arm to targeted areas in the tub for improved cleaning coverage
• Helps maintain proper spray patterns; a damaged or clogged nozzle can reduce wash performance
• Commonly replaced when the upper spray arm drips, sprays unevenly, or is noisy during operation
• Works with the upper spray arm assembly to help rinse dishes and remove food soils

• Disconnect power and water supply before attempting service and follow the dishwasher manufacturer's instructions
• Remove the upper spray arm per your model's diagram to access and replace the nozzle; handle plastic parts carefully to avoid breakage
• Inspect the spray arm and any retaining clips or seals; replace damaged components as needed

This water inlet nut secures the water inlet valve connection to the appliance, helping maintain a leak-free seal and stable water supply. It's a simple replacement that restores a proper inlet connection. What it does:

• Secures the water inlet tubing to the inlet valve to prevent leaks
• Restores a tight, stable connection when original nut is cracked, stripped, or missing
• Helps stop water seepage and dripping at the valve connection
• Compatible with standard inlet valve fittings used on many GE appliances

• Water inlet nut

• Disconnect power and turn off the water supply before starting any repair
• Hand-thread first to avoid cross-threading, then snug with appropriate tool; do not overtighten
• Inspect adjacent fittings and seals; replace damaged gaskets or tubing as needed

This airbreak flow meter assembly detects water flow and helps the appliance manage fill and dispense cycles for reliable operation. It replaces a failing flow sensor to restore correct water-sensing and cycle control. What it does:

• Measures water flow through the system so the control can confirm proper filling
• Helps prevent overfill or underfill conditions by reporting flow status to the control
• Common symptoms of a failing unit: long or no-fill cycles, water-related error codes, or the appliance not advancing through cycles
• Works as part of the water/ice/fill system to ensure timing and valve operation respond correctly

• Disconnect power and shut off the water supply before starting any repair
• Handle the sensor and electrical connector carefully; avoid pulling on wiring
• Install in the correct orientation and ensure all seals and fittings are seated to prevent leaks
• After installation, restore power/water and run a test cycle to verify proper operation

This inlet fill hose routes household water from the supply to the appliance so it fills normally. Replaces a damaged, leaking, or kinked hose to restore reliable water flow and stop visible leaks during cycles. What it does:

• Connects the cold/hot water supply to the washer's water inlet valve or dispenser
• Restores proper water flow when the original hose is cracked, split, or leaking
• Helps prevent flooding and water damage from worn or burst hoses
• Reduces low-fill or no-fill symptoms caused by collapsed or obstructed hoses

• One fill hose as shown

• Turn off electricity and shut off the water supply before starting
• Disconnect supply lines and drain residual water into a towel or bucket
• Hand-tighten fittings and check for leaks; avoid overtightening metal-to-metal
• Inspect and replace any worn washers or clamps; test with a short fill cycle after installation

This small sealing gasket fits between the water inlet and its retaining nut to prevent leaks at the connection. It restores a watertight seal so the appliance fills normally without dripping. What it does:

• Seals the water inlet connection to stop leaks where the inlet tube meets the retaining nut
• Helps prevent water on the floor or around the appliance caused by a failed inlet seal
• Restores proper water flow by maintaining a uniform, leak-free connection
• Commonly replaced when the old gasket is cracked, flattened, or missing

• Turn off water supply and unplug the appliance before servicing
• Remove the inlet nut and replace the gasket, ensuring it seats evenly in the groove
• Hand-start the nut, then tighten to secure; avoid overtightening which can deform the gasket
• Inspect the mating surfaces and replace the inlet nut or tubing if damaged

This mid spray docking port secures the dishwasher's mid-level spray arm and helps maintain correct spray alignment for even cleaning. Replacing a worn or broken dock restores proper arm seating and reduces wobble or spray loss. What it does:

• Holds the mid spray arm in place so it docks correctly between cycles
• Helps direct water flow from the mid spray arm for proper coverage
• Prevents the mid arm from slipping, wobbling, or contacting dishes
• Common symptom fix: mid or upper rack not getting water, arm loose or noisy

• One mid spray docking port

• Disconnect power to the appliance before starting work
• Remove the appropriate rack(s) to access the mid spray assembly
• Most replacements snap or press into place; align the arm and verify smooth rotation

This wash pump discharge hose routes water from the washer's pump to the drain path, helping remove wash water during drain cycles. Replaces a cracked, split or clogged discharge hose to restore proper draining. What it does:

• Carries pump discharge water from the wash pump to the drain outlet
• Prevents leaks caused by cracks, splits or brittle sections in the original hose
• Helps stop water pooling or slow draining when the hose is damaged or disconnected
• Matches OEM shape and connection points for a direct replacement

• Disconnect power and water supply before starting any repair.
• Inspect pump outlet and drain fittings for damage; replace clamps if rusted or worn.

The Water Valve is an OEM replacement part for GE dishwashers. Located inside the valve body, this electronically-controlled component precisely regulates water inlet and flow during each cycle of the wash sequence. The water valve utilizes sensors and timer modules to open and close water lines at the correct times based on cycle selections.

Symptoms of a defective water valve include:

• Failure to fill or improper filling  
• Inability to switch between cycles
• Water leaks from the valve body area
• Erratic or inconsistent water usage amounts

Causes of malfunction often stem from worn internal seals, mineral buildup obstructing valve ports over time, or issues with the electronic control board. Replace yours today with this genuine GE water valve for reliable water control, sensor functions, and trouble-free dishwasher cycles. 

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

A small squeeze-style clamp used to secure thin appliance tubing and help prevent leaks by holding water or drain lines in place. Simple, compact design for tight spaces where a low-profile clamp is needed. What it does:

• Pinches and holds small-diameter tubing to keep lines secure and reduce slipping
• Helps stop drips or leaks caused by loose or improperly seated tubing
• Works in tight spaces where larger clamps won't fit
• Commonly used on water, drain, and ice-maker lines in refrigerators and other appliances

• Disconnect power and shut off water supply before servicing the appliance
• Slide clamp over tubing and pinch/compress per OEM guidance until tubing is held firmly
• Inspect connections after restoring power/water and run appliance to check for leaks
• Replace with identical clamp size if tubing or fittings are damaged

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces