Parts for Ge PDT145SGL0WW: Motor-Pump Mechanism Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Fix dishes not cleaning properly or weak spray with this dishwasher wash pump assembly. Replaces failed pumps causing poor water circulation.

Dishes not getting clean or cycles running too long? This turbidity sensor measures wash water soil levels to optimize cleaning. Direct fit replacement.

Dishwasher not draining or showing error codes? This drain pump assembly removes water at cycle end. Can fail from clogs or debris buildup. DIY repair.

Leaking dishwasher during fill or drain? This hose clamp secures pump, sump, and inlet connections to stop water leaks and restore watertight seals.

Leaking dishwasher during fill or drain? This hose clamp secures pump, sump, and inlet connections to stop water leaks and restore watertight seals.

This wash pump hanger is the replacement bracket that secures the dishwasher wash pump/motor assembly to the tub, keeping the pump aligned for reliable draining and quiet operation. Restores proper support and fit after a damaged or broken hanger. What it does:

• Holds the wash pump/motor assembly in place to maintain correct alignment and position
• Helps prevent pump movement that can cause vibration or increased noise during a cycle
• Reduces the risk of leaks by keeping the pump sealed and properly seated
• Can address symptoms such as unusual pump noise, intermittent drainage issues, or a loose-feeling pump assembly

• Disconnect power to the appliance before any service
• Support the pump assembly before removing the old hanger to avoid stress on hoses and seals
• Inspect surrounding seals, gaskets and fasteners during replacement and replace if damaged

Sump insert installs in the dishwasher base to channel water flow. Replace if cracked, broken, or worn to restore proper drainage and pump operation.

Leaking dishwasher? This clamp kit secures hose and pump connections to stop leaks and restore water circulation. Moderate DIY, 1-2 hours.

Fix dishwasher not draining or leaking water with this discharge hose. Routes wastewater from pump to drain. Direct replacement, easy install.

Leaking dishwasher during fill or drain? This hose clamp secures pump, sump, and inlet connections to stop water leaks and restore watertight seals.

Seals the dishwasher sump/drain port to prevent water leaks and protect internal components. Replace if cracked, worn, or leaking. Confirm fit with your model.

Dishes still dirty after wash? A clogged or torn fine filter screen lets debris recirculate. This 10-minute fix restores cleaning performance.

Dishwasher not draining or making noise? The glass trap catches broken glass and debris in the sump before it damages the pump motor and spray arms.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Replacement drain hose for dishwashers. Carries wastewater from the unit to your household drain. Needed when original hose is cracked, leaking, or damaged.

Fix leaking or standing water in your dishwasher with a new drain hose. Carries wastewater from pump to disposal. Straightforward DIY repair.

Dishes not cleaning on the bottom rack? This lower spray arm restores water coverage when cracked, clogged, or not rotating. Easy DIY fix in minutes.

Traps large food particles in your dishwasher's sump for better wash performance. Replace when cracked or clogged. Confirm fit with your model number.

Fix poor cleaning on lower rack with this dishwasher spray arm base. Restores proper water distribution when dishes come out dirty or spotty.

Fix dishwasher leaks or poor drainage with a new sump assembly. Collects and directs wash water to the pump for proper circulation and draining.

Fix water leaking under your dishwasher with a new sump gasket. This rubber seal prevents leaks where the sump meets the tub. Moderate DIY repair.

Fix dishes not cleaning properly on the top rack with this dishwasher upper spray arm assembly. Direct replacement for worn or clogged units.

Fixes dishwasher not filling properly or overfilling. This flow meter assembly detects water flow to manage fill cycles and restore correct operation.

Routes water from your supply line to the dishwasher. Replace if leaking, kinked, or damaged to restore proper fill and prevent water damage.

Seals the water inlet connection to prevent leaks where the supply tube meets the valve. Replace if water drips during fill cycles. Confirm fit with your model.

Dishwasher won't drain or drains slowly? This pump discharge hose routes water from the pump to the drain. Replaces cracked or clogged hoses. Easy DIY fix.

Dishwasher not filling with water? This water inlet valve controls water flow into your dishwasher. Essential component for proper wash cycles.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.