Parts for Electrolux EFLS210TIS01: Motor / Tub / Drain Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a replacement mounting bolt for appliance assemblies that secures panels, brackets, or components to the cabinet. Replaces a worn or missing fastener to restore proper fit and stability. What it does:

• Secures panels, brackets, or components in place to prevent rattling or misalignment
• Restores proper fastening where an original bolt is damaged, stripped, or missing
• Helps maintain appliance stability during normal use
• Compatible with the original mounting location and hardware when the OEM part number matches

• One replacement bolt

• Use the matching thread size and torque rating; do not overtighten to avoid stripping
• Replace only with the same style and length bolt for proper fit
• Disconnect power and water (if applicable) and follow appliance safety procedures before servicing

This drain pump moves wastewater out of the appliance so cycles can complete reliably. Replaces a failed pump to restore proper draining and help prevent standing water or cycle interruptions. What it does:

• Forces drain water out of the unit during drain cycles
• Helps prevent standing water and related odors
• Common symptom: appliance will not drain or shows a drain error

• One drain pump

• Disconnect power (and water supply if applicable) before starting work
• Inspect and clear hoses and filters of debris before replacing the pump
• Handle electrical connectors and mounting hardware carefully; secure all connections before testing

This pump assembly replaces the dishwasher drain pump to remove wash water from the tub, helping restore proper draining and prevent standing water after a cycle. What it does

• Pumps wastewater from the dishwasher tub to the drain hose during the drain cycle
• Can resolve symptoms such as standing water in the tub, long drain cycles, or drain-related error codes
• Can reduce grinding or humming noises caused by a failing pump motor or obstructed impeller
• Helps prevent leaks when the pump housing and seals are intact and functioning

• Disconnect power to the appliance before beginning any repair.
• Access typically via the lower front kick panel or by tilting the dishwasher; follow the manufacturer service manual for safe access.
• Inspect and clear any debris from the impeller and hose connections before installing the new pump.

The Vane is an OEM part for Frigidaire washing machines. This part helps to move clothes effectively throughout the drum during a wash cycle. It ensures a more efficient cleaning by lifting and tumbling the laundry, which allows for better water and detergent penetration through the fabric.

Causes of a bad vane include physical damage such as cracks or breaks, which can occur from regular wear or from washing heavy or rigid items. Additionally, overloading the machine consistently can lead to premature wear of the baffles.

Symptoms of a bad vane include:

• Ineffective cleaning of clothes
• Unusual noises during the wash cycle
• Clothes getting caught or snagged during operation, which may tear fabric

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This drive belt turns the dryer drum so clothes tumble for even drying. It replaces a worn or broken belt to restore normal drum rotation and reduce noise or slipping during operation. What it does

• Wraps around the dryer drum and motor/idler to transmit motor torque to the drum
• Restores drum rotation when a worn or broken belt prevents tumbling
• Helps stop squealing, slipping, or burning-smell symptoms caused by a failing belt
• Works with the dryer's idler and motor assembly to maintain proper tension

• One dryer drive belt

• Disconnect power (and gas supply on gas models) before beginning work
• Access may require removing the dryer top/front or rear panel depending on model
• Inspect the idler pulley, drum rollers, and motor shaft while replacing the belt; replace worn supporting parts
• Clean lint and debris from the cabinet and vent path to prevent overheating after repair

This clamp secures a flexible hose or line to a fitting, helping prevent leaks and keeping connections stable. It's a simple replacement that restores a proper seal and reduces vibration or hose movement. What it does:

• Tightens around a hose to hold it firmly on a barb or fitting
• Helps stop leaks from loose or worn hose connections
• Reduces hose movement and vibration that can cause wear
• Used wherever a small durable clamp is needed on water or drain lines

• One clamp

• Turn off power and water supply before servicing; drain any residual water
• Remove the old clamp and slide the new clamp into position over the hose and fitting
• Tighten securely but do not overtighten—avoid crushing the hose
• Use appropriate hand tools

This replacement spring restores proper tension and movement for the original appliance mechanism, helping doors, latches or moving parts return and operate smoothly. Use it to fix sagging, loose or unresponsive components. What it does:

• Provides tension or return action for the appliance component it's fitted to
• Helps restore smooth opening, closing or latching motion
• Addresses symptoms such as parts that hang, don't return, or feel loose
• Matches the OEM form and function when installed in the correct location

• Install by matching orientation and attachment points to the original spring; retain any clips or anchors
• Use proper tools and avoid overstretching the spring during installation
• Disconnect power and follow safety precautions before servicing the appliance

This bellows is the flexible door boot seal for front-load washers. It creates a watertight connection between the outer tub and the front panel/door opening so wash water stays contained through fill, wash, and spin.

• Provides a flexible, watertight seal between the tub and door opening
• Absorbs tub movement during spin to help prevent leaks
• Typical symptoms: water leaking from the front of the washer, visible tears/cracks in the gasket, items snagging at the door opening, or persistent mildew on the seal
• Restores proper sealing to prevent drips and puddles on the floor

• Disconnect power and turn off water supply before servicing
• Remove the front/door panel as needed; release the outer retaining clamp/spring and pull the old bellows free
• Fit the new bellows onto the tub first, aligning any index marks; ensure the inner lip is fully and evenly seated
• Attach the bellows to the front panel and reinstall retaining clamps; run a quick fill/rinse to check for leaks

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This small cushion serves as a protective bumper to reduce noise, vibration, and wear where two appliance surfaces meet. It helps absorb impact and prevent metal-on-metal contact for quieter, smoother operation. What it does

• Acts as a vibration damper to reduce rattles and buzzing
• Cushions doors, drawers, panels or moving parts to prevent chips and dents
• Prevents direct surface contact that can cause wear or noise
• Helps maintain proper alignment and quiet operation when installed

• Disconnect power to the appliance before beginning any repair
• Clean mounting surface of dirt, grease, and old adhesive for best adhesion
• Press or fit the cushion into place; secure with compatible adhesive if the original used it

This replacement drain hose routes and directs waste water away from the appliance to restore normal draining and prevent leaks. Designed to match the original routing and connection points for a direct swap. What it does:

• Carries wastewater from the appliance to the drain system to prevent pooling.
• Replaces cracked, brittle, or clogged hose sections that cause leaks.
• Helps stop intermittent dripping, water under the unit, or slow draining.
• Restores a secure channel for discharge to reduce odor from standing water.

• One replacement drain hose

• Disconnect power and, if applicable, shut off the water supply before starting.
• Place a shallow pan or towels under connections to catch residual water.
• Inspect and reuse OEM clamps only if undamaged; replace corroded clamps with equivalent hardware.
• Push hose fully onto fittings and secure clamps; avoid kinking or sharp bends that restrict flow.

The Recirculation Hose is an OEM part for Frigidaire washing machines. It is a flexible plastic tubing that recirculates water inside the washer drum during certain cycles. The recirculation hose is designed to withstand the pressures and temperatures inside the washer during operation, efficiently channeling water flow without kinks or cracks. 

Causes of a bad recirculation hose include wear and tear over time, exposure to mineral buildup or foreign debris inside the washer, or damage due to impact or freezing temperatures. 

Symptoms of a bad recirculation hose include:

• Water leaks from the hose area 
• Excessively long wash cycles
• Poor cleaning performance
• Loud noises coming from the hose

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This compensator is a direct-replacement mechanical stabilizer that helps maintain correct alignment and smooth operation of the appliance component it supports, reducing excess vibration and uneven movement. What it does:

• Supports and stabilizes the moving assembly to promote consistent operation
• Helps reduce vibration, rattling or knocking during normal use
• Can correct minor alignment issues that cause uneven movement or noise
• Restores the intended fit and function when the original part is worn or damaged

• One compensator

• Disconnect power before starting any repair to avoid shock or injury
• Basic hand tools are typically required; follow the appliance service manual for access and removal
• Inspect mating surfaces and surrounding components for wear; replace additional damaged parts as needed

A replacement door gasket that seals the refrigerator door to maintain cold temperatures and help keep food fresh. Fits where the original door seal has become cracked, torn, deformed, or no longer seals tightly. What it does:

• Creates an airtight seal around the refrigerator door to reduce cold air loss and prevent warm air infiltration.
• Helps stabilize internal temperatures to protect food and improve cooling efficiency.
• Commonly replaced for visible cracks, rips, permanent deformation, or noticeable cold-air leaks around the door.
• Restores proper door closure and reduces frost buildup around the door opening.

• One replacement refrigerator door gasket.

• High-level task: remove the old gasket, clean the mounting channel, and press or fasten the new gasket into place following OEM alignment.
• Take care to seat the gasket evenly around the full perimeter to ensure a continuous seal.
• If adhesive or fasteners are present, use the same type specified by the manufacturer; avoid forcing or trimming unless directed by OEM instructions.
• Disconnect power to the appliance before major service and follow all safety precautions.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.