Parts for Jenn-Air JDSP548HM01: Optional Parts (Not Included) Parts

This knob bezel is the trim ring that sits behind a control knob, covering the panel opening and spacing the knob correctly. Replacing a cracked, loose, or missing bezel restores a finished look and smooth, consistent knob feel.

• Provides finished trim and support around the control-shaft opening
• Maintains proper clearance so the knob turns without scraping the panel
• Helps keep the knob aligned and seated on the shaft
• Helps when you notice wobbling, visible gaps, broken/missing ring, or a hard-to-turn knob

• Disconnect power (and gas, if applicable) before servicing
• Pull the control knob straight off; remove the old bezel from the panel
• Align the new bezel's orientation tabs and press it fully into place
• Reinstall the knob and verify smooth operation

This bezel control knob replaces a worn, cracked, or missing control knob to restore safe, reliable control of your appliance settings. It provides a simple push-on replacement to make selections smooth and accurate. What it does:

• Replaces a damaged or missing control knob so settings can be selected and turned easily
• Snaps onto the control shaft to provide a secure grip and clear tactile feedback
• Stops slipping or stripped-turn issues caused by worn knobs or splined shafts
• Helps prevent accidental setting changes from loose or broken knobs

• One bezel control knob

• Disconnect power (unplug appliance or shut off breaker) before service
• Pull off the old knob straight from the control shaft; align splines and push the new knob onto the shaft until fully seated
• If the knob does not fit, confirm shaft type and orientation before forcing to avoid damage

This large brass burner cap fits over a cooktop surface burner to direct the flame and protect the burner head for reliable heating. Durable brass construction helps resist corrosion and maintain even flame distribution. What it does:

• Sits on the surface burner head to shape and focus the gas flame for efficient cooking
• Helps maintain even heating across cookware and reduces hot spots
• Protects the burner head from spills, debris, and corrosion
• Commonly replaced when flame pattern is irregular, burner won't light cleanly, or cap is corroded/damaged

• Turn off the gas supply and power to the appliance before servicing
• Remove grates and lift off the old cap; seat the new cap flat on the burner head
• Do not force or overtighten — caps are drop-in parts that must align with the burner ports

This burner cap sits on a gas cooktop burner head to direct and shape the flame for even cooking and reliable ignition. It restores correct flame pattern and helps protect the burner head from spills and debris. What it does:

• Covers the burner head to focus the gas flame for consistent heat across cookware
• Helps maintain proper ignition and stable flame behavior
• Protects the burner head from food, spills, and corrosion that can affect performance
• Commonly replaced when cracked, chipped, warped, or causing uneven or yellow/sooting flames

• Turn off the appliance and let the cooktop fully cool before handling parts
• No tools usually required; lift off the old cap and set the new cap squarely on the burner head
• Ensure the cap sits flat and centered so the flame ports align correctly

This wok ring is a burner accessory that stabilizes round-bottom woks on gas range grates, letting you use wok-style cookware safely and maintain even heating. Durable design keeps cookware centered over the flame. What it does:

• Supports round-bottom woks and small, curved cookware on a gas burner
• Helps keep cookware stable to prevent tipping and uneven cooking
• Places the wok closer to the flame for improved heat contact
• Fits into the burner grate without tools for simple placement

• Install only on a compatible gas range grate; ensure the range is off and cool before placing the ring
• Position the ring securely in the grate recess so the wok sits level over the burner
• Inspect for cracks or warping; replace if damaged to avoid instability

This OEM part is a griddle cover made for stoves. A griddle cover is a metal piece that can be placed over the stove's burners to be used as a cooking surface. If a griddle cover becomes damaged due to excessive use, it can become ineffective and need to be replaced. Luckily replacing a griddle cover is a very simple process.To replace the griddle cover, make sure the stove is unplugged. Being by lifting the old cover out of its place by pushing it forward and lifting upward to release it from its attachment on the stove. Once removed set it off to the side. Next, proceed to take the new cover and place it back where the old one was while making sure it locks into its attachment. Once secured, turn the power back on to the appliance.This genuine replacement part is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand stoves.

This broiler pan restores a sturdy broiling surface in your oven. It holds food for high-heat broiling while the lower tray catches drippings to help reduce smoke and keep the oven cavity cleaner.

• Provides a durable surface for broiling under the broil element or flame
• Collects grease and juices beneath the food during high-heat cooking
• Replaces pans that are missing, warped, chipped, or heavily rusted
• Helps cut down on smoke and mess from burnt-on residue on a damaged pan

• Allow the oven to cool completely before handling
• Slide the pan onto the appropriate rack position per your model's instructions; no tools required
• Use oven mitts—surfaces and edges can be hot after broiling
• If your model uses a separate broiler grid or rack, position it on top of the pan before cooking

Size: 10 fl. oz. Used on glass, ceramic and porcelain cooktops.