Parts for Lg LRE3193SB/00: Other Parts

Factory mounting screw secures brackets, covers, and internal assemblies in your range. Replaces missing, stripped, or damaged fasteners for proper fit.

Replacement washer that secures fasteners and distributes load at connection points in ranges and ovens. Needed when original is missing, worn, or damaged.

Replacement screw for electric and gas ranges. Secures internal components and panels. Needed when original is stripped, missing, or damaged during repair.

Secures panels, brackets, and internal components in your range. Replace this screw if the original is missing, stripped, or rusted for proper fit.

Customized screw secures panels, brackets, and small assemblies in ranges and ovens. Replace when original specialized fastener is missing or damaged.

Hardware washer that distributes fastener load and maintains proper spacing in your range. Replace if missing, worn, or damaged to restore secure mounting.

Secures the fan blade to the motor shaft in ranges and ovens. Replace if loosened from vibration, stripped threads, or missing to restore proper mounting.

Replacement mounting screw for electric and gas ranges. Secures components and panels. Needed when original screw is stripped, missing, or damaged.

Replacement mounting screw for range panels and components. Needed when original screw is stripped, lost, or damaged. Secures panels for stable operation.

Mounting screw for range bake element assembly. Secures heating element to oven cavity. Replace if screw is stripped, missing, or corroded during repair.

Secures the idler to maintain proper belt tension and alignment in your range drive system. Replace if bent, worn, or causing noise issues. Verify fit with your model number before ordering.

Replace the outer door frame assembly on your range. This structural component surrounds the door glass and can crack, warp, or become damaged over time.

Inner cover panel for electric ranges. Installs inside the appliance body to protect internal components. Replace if cracked, broken, or missing.

Insulator for electric and gas ranges. Replaces cracked, broken, or missing insulation components. Restores proper heat protection and spacing.

Secures internal components and trim panels to prevent shifting, sagging, or vibration. Replace if your bracket is cracked, broken, or missing.

Secures and pivots your range door for smooth operation. Replace if door sags, rubs, or won't close evenly. Confirm fit with your model number.

Bracket that secures the door handle to your range. Replace if cracked, broken, or missing to properly mount and support the handle assembly.

Mounting bracket secures internal components and panels in your range. Replace if cracked, bent, or missing to restore proper alignment and support.

Fix burners turning on by themselves or wrong burners activating. This range main control board manages power distribution and coordinates all functions.

Fix burners not working, unresponsive buttons, or display issues. This range display control board manages the digital interface and burner controls.

Range controls not responding or functions intermittent? This wire harness restores electrical connections between components. Moderate DIY repair for most models.

Fix intermittent power issues or burnt wiring in your range with this wire harness. Restores electrical connections between control boards and components.

Circular lug that connects stripped wires to threaded terminals in microwaves. Replace if cracked, corroded, or missing to restore secure connections.

Replace a faulty range wire harness if your oven isn't heating, burners won't turn on, or controls are unresponsive. Moderate DIY repair in 30-60 minutes.

If your range isn't heating properly or takes too long to preheat, the heater assembly may need replacement. This part restores proper heating function.

Protective cover that installs over the power cord connection on your electric range. Replace if cracked, broken, or missing to restore appearance.

Replace your range's glass cooktop surface if cracked, scratched, or broken. This ceramic glass top installs over the burner elements and controls.

Idle packing bushing for electric and gas ranges. Replaces worn, cracked, or missing bushings. Ensures proper fit and cushioning for range components.

Rear cover panel for electric ranges. Replaces cracked, broken, or missing back covers. Installs on the rear exterior of the range body. Direct fit.

Fix loose or rattling heating elements with this range heater bracket. Secures the heater assembly in proper alignment to prevent movement and damage.

Range burner not heating? This dual surface element features two heating zones for versatile cooking. Moderate DIY repair requiring cooktop disassembly.

This Radiant Surface Element is an OEM replacement part for LG electric ranges and cooktops. It is a high-power coil heating unit located below the cooktop surface that provides efficient, customizable heat for various cooking needs.

Causes of failure can be wear and damage to coiled filaments from prolonged heating cycles, cracking of ceramic insulators, or loose wiring connections suffering arcing or resistance over time.

Symptoms of a faulty element include:

• Slow or inadequate heating of cookware even on high settings
• Temperature fluctuations within the heating zone
• Burning or charring of spills and foods on the element itself
• Tripped circuit breakers obstructing range operation

This replacement is also compatible with some Kenmore models

Range grill not browning or heating? This radiation heater element delivers radiant heat for microwave grill and browning features. Restores proper cooking.

Rubber bumper grommet for electric and gas ranges. Replaces cracked, worn, or missing grommets that cushion and support range components.

Oven rack for electric and gas ranges. Provides stable surface for cookware during cooking. Replace if bent, warped, cracked, or missing.

Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.

Fix a noisy or non-working convection fan with this replacement motor. Common when fan makes grinding sounds then stops. Moderate DIY repair, 30min-2hrs.

Replace a damaged or frayed wire harness in your range. This single electrical connector routes power between components. Needed when wires are cut, melted, or corroded.

Range won't power on after self-cleaning cycle? This high temperature thermostat often fails during cleaning, cutting power and locking the door. Easy 1-minute fix.

Replace your range's wire harness if the existing wiring is damaged, frayed, or showing signs of wear. Connects electrical components inside your range.

If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.

Replace a damaged or corroded wire harness in your range. This single-connection harness restores proper electrical connections when original wiring is frayed, melted, or broken.

Wire harness for electric ranges. Connects internal electrical components. Replace if wires are frayed, damaged, or connectors are broken or melted.

Range not baking evenly or convection mode not working? This convection fan circulates hot air for even cooking. Common repair for uneven baking issues.

Mounting supporter bracket that stabilizes internal components in your electric range. Replace if cracked, broken, or missing to restore proper alignment.

Fix uneven heating or loose heating elements with this electric range heater bracket. Secures the bake or broil element in proper position for consistent cooking.

Replace your burned-out or dim oven light bulb to restore interior visibility while cooking. Direct-fit incandescent lamp for safe food monitoring. Verify fit with your model number.

Oven won't brown or crisp food on top? Replace the broil element. This upper heating component restores efficient broiling in electric ranges.

Oven won't heat or reach temperature? A failed bake element causes inconsistent temps and uneven cooking. Direct replacement, moderate DIY repair.

Replace your range oven door gasket to restore proper heat sealing and improve cooking efficiency. Fits select electric and gas range models.

Range not heating properly? This sheath heater element generates radiant heat for broiling and convection. Restores consistent oven temperature performance.

Front-mounted control panel assembly that houses the touchpad buttons and display. Replaces a cracked, faded, or unresponsive panel for a finished look.

Front plate for electric ranges. Installs on the range front panel. Replace if cracked, chipped, damaged, or missing to restore appearance.

Replacement control panel for your range. Installs on the front to house controls and display. Order a new panel if yours is cracked, damaged, or worn.

Rubber foot pad that supports and stabilizes your range on the floor. Replace if cracked, broken, worn, or missing to keep your appliance level.

Secures your range to the floor or wall to prevent tipping hazards. Replace if damaged or during installation. Verify compatibility with your model.

Replacement slider for range drawers and panels. Restores smooth movement when original is worn, cracked, or broken. Mounts to moving components for alignment.

Replace worn range drawer sliders to restore smooth, quiet operation and proper alignment. Prevents damage to surrounding trim. Confirm fit with your model.

Replace your range's warming drawer if it's cracked, damaged, or missing. This drawer installs beneath the oven cavity to restore functionality.

Mounting anchor for range door handles. Replaces worn, broken, or missing anchors to restore secure handle attachment and eliminate wobbling or loose fit.

Accessory assembly for electric and gas ranges and wall ovens. Replaces damaged, broken, or missing accessory components. Restores proper fit and function.