Parts for Thermador CMT20: Other Parts

This discharge adapter connects the appliance's drain hose to the drain or pump outlet, restoring a secure path for wastewater and preventing leaks. Fits the factory connection point to ensure correct hose alignment and sealing. What it does:

• Provides a sealed connection between the appliance drain/pump outlet and the drain hose
• Prevents leaks and water dripping at the hose connection
• Helps restore proper drainage when the original adapter is cracked, worn, or missing
• Matches OEM connection dimensions to maintain proper hose routing and fit

• Disconnect power to the appliance and turn off water supply before starting
• Inspect hose and clamps; replace clamps or hose if damaged for a reliable seal
• Push adapter fully onto the outlet and secure hose with a clamp per manufacturer guidance

A replacement glass turntable plate that restores a microwave's rotating cooking surface for even heating and stable cookware support. Fits on the drive roller to provide a flat, heat-safe surface for daily microwave use. What it does:

• Replaces a cracked, chipped or missing glass turntable so food heats more evenly
• Provides a stable surface for plates and bowls to rotate during cooking
• Works with the turntable roller and coupling to restore proper rotation
• Prevents wobble and scraping that can occur with damaged glass

• Unplug the microwave or disconnect power before installing
• Handle the glass carefully to avoid cuts; do not install if chipped or cracked
• Align plate on the center drive coupling/roller support; it seats and rotates freely
• Use only the exact OEM plate size and part number to ensure proper fit

This Bake Element is an OEM part for Bosch Ovens. It's responsible for providing heat in the oven cavity for baking and cooking purposes. With prolonged use, the bake element can wear out or malfunction.

Frequent use at high temperatures can cause the bake element to deteriorate over time. Physical damage or overheating may also contribute to its failure.

Symptoms of a Bad Bake Element:

• Uneven cooking or baking
• Inconsistent oven temperatures
• Oven takes longer to preheat

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This thermal fuse stops excessive heat build-up by opening the circuit when temperatures get unsafe, protecting the appliance and its heating components. Replace a failed fuse to restore normal heating and safety functions. What it does

• Opens the circuit if overheating is detected to prevent damage or fire risk.
• Prevents the heating element or motor from running when the fuse is blown.
• Common symptom: appliance fails to heat or runs but produces no heat.
• Common symptom: appliance does not start or suddenly stops during a heat cycle.

• One thermal fuse.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Replace with the exact OEM part number; improper substitutes may cause malfunction or safety issues.
• Inspect surrounding wiring and heating components for faults that could cause repeated fuse failures.

This part has been discontinued by the manufacturer and is no longer available.

This inner door glass panel replaces the interior glass pane in the door assembly. It restores a clear, heat-resistant barrier so your appliance can retain heat and operate safely after the original pane cracks or shatters.

• Serves as the interior glass pane of the door facing the cavity
• Helps insulate the cavity to maintain stable cooking temperatures
• Direct replacement for cracked, shattered, or missing inner glass
• Can help address heat loss and unsafe door conditions

• Disconnect power at the breaker and allow the appliance to cool completely before starting
• Remove the door per your model's service instructions and place it on a padded work surface
• Wear cut-resistant gloves and eye protection; handle glass by the edges
• Transfer any brackets/clips in the original order and tighten fasteners snugly without overtightening

This lock bolt spring is a small replacement spring for the door latch assembly that helps the lock bolt return and hold the door closed. Restores reliable door latching and proper engagement of the door lock mechanism. What it does:

• Provides tension for the lock bolt so the door latch returns to the closed position
• Helps the door stay securely latched during operation
• Can resolve symptoms like a loose or non-returning latch, door not staying closed, or intermittent door-lock issues
• Works as part of the latch/lock assembly — not a standalone electronic lock

• One lock bolt spring

• Disconnect power to the appliance before beginning any repair
• Small parts and springs can be under tension; use care and keep track of orientation
• Installation typically requires partial disassembly of the door or latch housing;

This hinge stop secures and limits door movement for proper alignment and safe operation, helping prevent over-travel and wear on the hinge assembly. It's a direct-fit replacement designed to restore correct door stopping action. What it does

• Acts as the mechanical stop that limits door swing to the intended opening angle.
• Restores proper door alignment when the hinge no longer catches or the door swings too far.
• Helps reduce stress and wear on hinge pins and mounting points.
• Common symptom: door drifts past the closed/stop position or hangs unevenly.

• One hinge stop

• Disconnect power to the appliance before starting work when applicable.
• Access may require removing door trim or covers; keep fasteners organized.
• Use basic hand tools; avoid forcing components to prevent damage.

This is a replacement LIS CMT switch used to restore proper electrical switching for the control module and motor circuits. It helps return normal operation when the original switch is worn or failed. What it does:

• Acts as an electrical switch for the control module and motor circuitry
• Enables the appliance to complete control signals needed for motor or control functions
• Commonly linked to symptoms like no motor response, intermittent operation, or unresponsive controls
• Provides a direct replacement that fits the original mounting and connector arrangement

• Disconnect power to the appliance before attempting any repairs to avoid shock
• Handle the switch and connectors carefully to avoid damage to terminals or wiring
• Verify connector orientation and secure mounting when installing the new switch

This LIS switch (CMT) is a direct-replacement electrical switch that restores reliable circuit signaling for the appliance control system, helping return proper operation to affected functions. Designed to fit the original mounting and connector layout. What it does:

• Acts as the LIS (logic/interlock/signal) switch that opens or closes an electrical circuit when actuated.
• Restores reliable communication between the door/control assembly and the appliance control board.
• Commonly used to address symptoms such as intermittent operation, failure to start, or unresponsive controls.
• Matches OEM form and connector style for a straightforward replacement.

• Disconnect power (unplug or switch off breaker) before attempting any repair.
• Use basic hand tools; note connector orientation before removal to ensure correct reinstallation.
• Handle the switch and wiring harness carefully to avoid damage to terminals or insulation.

This door switch detects when the door is fully closed and latched. Replacing a worn or stuck switch restores safe, consistent start/stop behavior and ensures the unit only runs with the door securely shut. What it does:

• Senses door position and signals the control to enable/disable operation
• Prevents the appliance from running with the door open
• Resolves issues such as: won't start despite power, stops when the door is jostled, "close door" message, or needing to press on the door to run
• Helps restore reliable cycle start and proper safety interlock function

• 1 door switch

• Disconnect power at the breaker before servicing
• Access the switch behind the door panel or latch area; note wire locations or take a photo
• Move wire connectors to the new switch one at a time; ensure terminals are fully seated
• Reassemble and test door closure and operation before returning to service