Parts for Thermador MSC28-4: Other Parts

This discharge adapter connects the appliance's drain hose to the drain or pump outlet, restoring a secure path for wastewater and preventing leaks. Fits the factory connection point to ensure correct hose alignment and sealing. What it does:

• Provides a sealed connection between the appliance drain/pump outlet and the drain hose
• Prevents leaks and water dripping at the hose connection
• Helps restore proper drainage when the original adapter is cracked, worn, or missing
• Matches OEM connection dimensions to maintain proper hose routing and fit

• Disconnect power to the appliance and turn off water supply before starting
• Inspect hose and clamps; replace clamps or hose if damaged for a reliable seal
• Push adapter fully onto the outlet and secure hose with a clamp per manufacturer guidance

This mounting bracket secures a dishwasher component to the cabinet or chassis, restoring proper panel alignment and reducing movement. It's a simple replacement for a bent, broken, or missing bracket to improve fit and quiet operation. What it does:

• Provides a secure mounting point for door/panel or internal components
• Keeps panels and trim aligned to prevent gaps and rubbing
• Reduces rattling or movement caused by a loose or damaged bracket
• Restores stable attachment after impact or corrosion-related failure

• Disconnect power and turn off the water supply before starting work
• Basic hand tools (screwdriver, nut driver) are typically required
• Support the panel or component while removing and installing the bracket to prevent dropping
• If fasteners are corroded or damaged, replace them with like-for-like hardware

This bake element is the oven's lower heating element that produces the consistent heat needed for baking and roasting. It restores the oven's ability to heat evenly so food cooks through. What it does:

• Heats the oven cavity from the bottom for baking and roasting cycles
• Replaces a burnt-out or visibly damaged lower heating coil
• Helps resolve symptoms like no heat on bake, uneven baking, or element not glowing
• Works with standard electric ranges that use a separate bake element

• Disconnect power at the breaker before starting any repair
• Access typically requires removing the oven floor or inner panel; keep screws and hardware organized
• Inspect terminal connections and mounting brackets; replace any damaged fasteners

This part has been discontinued by the manufacturer and is no longer available.

This wire oven rack slides into the oven's side supports to hold cookware at the correct height. Replace a bent, rusted, or missing rack to restore safe, level support and smooth sliding for baking, roasting, and broiling. What it does:

• Provides a stable, level surface for pans and dishes on the oven's side rails
• Lets you position food at multiple heights for proper cooking and airflow
• Slides in and out for easy loading and unloading when properly seated
• Common replacement reasons: bent/warped wires, flaking finish or rust, rough sliding, or poor fit

• 1 oven rack

• Allow the oven to cool completely; wear gloves to avoid sharp edges
• Pull the old rack straight out; clear debris from the side rails
• Align the new rack with the side supports and slide it in; ensure stops face the back if present
• Ensure the rack is evenly seated on both rails before placing cookware

The Lamp Holder is an OEM part for Bosch range hoods. It secures interior lighting fixtures in place above the stovetop, managing connecting wires neatly out of the way. Proper holder positioning ensures consistent task illumination.

Causes of failure can include normal wear from sustained vibration in the kitchen environment. Periodic replacement preserves essential visibility above the cooktop.

Symptoms of a faulty lamp holder are:

• Interior hood light failing to illuminate or flickering inconsistently
• Visible damage or deterioration of mounting clips/anchors
• Loosening of lighting unit from repeated cleaning

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

A replacement spring hinge that helps support and counterbalance the appliance door for smooth opening and closing and proper alignment. Restores reliable door movement and reduces drop or slamming when the original spring is worn or broken. What it does:

• Provides counterbalance tension to help hold the door open and control closing motion
• Restores proper door alignment and prevents uneven closing or gaps
• Reduces sudden drops, slamming, or heavy-feeling doors caused by a weak or broken spring
• Works as the mechanical tension element within the hinge assembly to maintain normal door operation

• One spring hinge (single counterbalance spring)

• Install with power disconnected and door supported to prevent dropping or injury
• May require partial door removal or hinge access depending on appliance design
• Compare the new spring to the old part for correct orientation before installing
• If other hinge components show wear or damage, replace them at the same time for best performance

This door switch detects when the door is fully closed and latched. Replacing a worn or stuck switch restores safe, consistent start/stop behavior and ensures the unit only runs with the door securely shut. What it does:

• Senses door position and signals the control to enable/disable operation
• Prevents the appliance from running with the door open
• Resolves issues such as: won't start despite power, stops when the door is jostled, "close door" message, or needing to press on the door to run
• Helps restore reliable cycle start and proper safety interlock function

• 1 door switch

• Disconnect power at the breaker before servicing
• Access the switch behind the door panel or latch area; note wire locations or take a photo
• Move wire connectors to the new switch one at a time; ensure terminals are fully seated
• Reassemble and test door closure and operation before returning to service