Parts for Thermador PRG484ECG02: Outside Cabinet Parts

This base panel replaces the lower kickplate on compatible Bosch dishwashers to restore a finished appearance and protect internal components at the machine's base. Durable stamped metal fits the cabinet opening and hides wiring and mounting hardware. What it does

• Covers and protects the dishwasher's lower cavity, shielding wiring, motors, and valves from debris.
• Restores the appliance's finished look when an old panel is dented, bent, or missing.
• Stops drafts and reduces light coming from under the unit that can indicate a missing panel.
• Helps prevent small objects from falling into the service area and causing noise or damage.

• Disconnect power to the appliance before starting any work; follow all safety instructions for your model.
• Removal typically requires removing the toe-kick or lower screws and then fastening the new panel with existing clips/screws.
• Handle edges carefully; wear gloves to avoid cuts on sheet metal.
• Replace only with manufacturer-specified fasteners.

This replacement cable harness routes power and signal connections between internal appliance components to restore reliable electrical continuity and component operation. Use it when wiring is damaged or connectors fail. What it does

• Transfers power and control signals between the control board and components (motors, valves, sensors).
• Replaces damaged or frayed wiring that can cause intermittent operation.
• Restores lost function when a failed harness prevents components from receiving power.
• Helps eliminate faults caused by loose, corroded, or broken connector leads.

• Disconnect all power before starting; verify the appliance is de-energized.
• Compare connectors and wire routing to the old harness before removing anything.
• Use proper connector seating and secure clips to prevent pinching or chafing.
• After installation, restore power and run a test cycle to confirm proper operation.

This cable harness routes power and signals between key components to restore reliable electrical connections and normal appliance operation. Replace a damaged harness to fix intermittent power, control failures, or non-responsive functions. What it does:

• Provides the multi-conductor wiring path that links control boards, sensors, and motors
• Carries low-voltage signals and/or line power needed for normal appliance functions
• Commonly replaced when wires or connectors are damaged, burned, or corroded
• Can resolve symptoms such as intermittent operation, no power to components, or control errors

• Disconnect all power before accessing wiring or controls to avoid shock
• Route harness along original clips and channels to prevent pinching or chafing
• Inspect connectors for damage and replace if terminals are loose or burned

This cable harness connects a dishwasher's electrical components to the control board, restoring reliable signal and power routing for proper operation. Designed as a direct-fit replacement to replace damaged or worn wiring. What it does:

• Routes power and control signals between the control board and components such as pumps, valves, or sensors
• Restores intermittent or failed electrical connections caused by frayed wires or broken terminals
• Helps stop issues like controls not responding, lights not working, or certain cycles not starting when the harness is faulty
• Maintains factory routing and connector fit for correct plug-in installation

• One replacement cable harness as shown

• Disconnect power and water before beginning any repair
• Verify connectors match and route wiring according to original harness path; secure with clips or ties as needed
• Handle connectors carefully to avoid bending pins; replace if terminals are corroded or damaged