Parts for Frigidaire FMV156DQC: 03 - Oven,Cabinet Parts

Microwave not heating food? A failed high voltage diode prevents proper cooking. Common fix for heating issues. Moderate difficulty repair part.

If your microwave won't heat food or hums loudly, the high voltage capacitor may have failed. This electrical component stores energy for the magnetron.

Microwave turntable stopped spinning? This motor restores rotation to your carousel platter. Simple DIY repair—three screws and one plug. 5-10 minutes.

Fixes microwave that won't power on or shuts off unexpectedly. This thermal cutout switch prevents overheating by cutting power when temps get too high.

Microwave runs but won't heat, or stays on when door opens? A faulty door switch is the likely cause. DIY repair takes about 30 minutes with basic tools.

Fix a microwave that won't start or only works when you lift the door. This switch kit restores reliable power control. Moderate DIY repair.

Replacement power cord for your microwave. Connects the appliance to your electrical outlet. Order a new cord if yours is frayed, damaged, or missing.

This hood fan motor drives the exhaust blower to remove smoke, steam and cooking odors from your range hood, restoring ventilation and airflow. Fits as a direct replacement motor when the original has failed. What it does:

• Spins the hood blower to move air out of the vent assembly
• Restores airflow when the fan is not running or runs weakly
• Stops humming, grinding or intermittent operation caused by a failed motor
• Works with existing blower wheel and housing when compatible

• One hood fan motor

• Disconnect power to the appliance before starting any work
• Follow OEM instructions for motor removal; keep track of mounting hardware and wiring
• Watch for sharp sheet-metal edges inside the hood; use gloves and eye protection
• After installation, restore power and test the fan on all speed settings

Fix a microwave that overheats or shuts off unexpectedly with this cooling fan motor. Common repair for loud fan noises or ventilation failures.

Restores interior and cooktop lighting in your microwave. Replace when bulb burns out or dims for clear visibility. Verify fit with your model number.

Black cooktop assembly cover panel for microwaves. Replaces cracked, broken, or missing trim pieces. Restores the finished appearance of your unit.

Secures microwave components to cabinet or frame. Replace when bracket is broken, cracked, or worn causing misalignment or excess vibration during operation.

Replacement glass turntable tray for your microwave. Installs on the rotating support to hold food during cooking. Replace if cracked, chipped, or broken.

Microwave won't turn on, made popping noise, or smells like burned electrical? The noise filter often fails when solder joints arc or short out.

This bushing guides and supports a rotating shaft to reduce wear and keep moving parts aligned, restoring smooth, quiet operation. Fits specific Frigidaire appliances—use the OEM part number to fit for your model. What it does

• Supports a rotating shaft or drum to prevent metal-on-metal contact
• Reduces friction and wear that can cause squeaks, grinding, or rough rotation
• Helps maintain proper alignment for consistent appliance performance
• Commonly replaces worn or damaged bushings that allow excessive play

• Disconnect power before servicing and access the affected assembly per your model's service manual
• Remove the worn bushing and any debris; press or tap the new bushing into place squarely
• Inspect mating shaft/surface for scoring or wear; replace or repair if damaged
• Use only OEM-recommended lubricants if specified by the manufacturer; do not assume grease is required

Secures your microwave door to engage the safety switches. Replace if the hook is cracked, broken, or worn, preventing the door from latching properly.

Microwave overheating or not venting properly? A worn blower wheel restricts airflow. This fan blade restores cooling and exhaust ventilation.

Microwave not heating or won't start? This thermal cutout fuse protects against overheating. Quick DIY fix—test for continuity with a multimeter.

Partition panel for microwave waveguide assembly. Installs inside the cavity to separate components. Replace if cracked, damaged, or missing.

Protective panel that shields microwave magnetron from grease and food splatter. Snaps into interior cavity. Replace when cracked, burned, or missing.

Mounting support plate for microwave installation. Provides structural stability for secure wall or cabinet mounting. Replace if cracked, bent, or missing.

Replacement air duct for your microwave ventilation system. Installs between the fan and exterior vent. Order a new duct if yours is cracked or damaged.

Label for built-in microwaves and wall oven combos. Replace worn, faded, or missing labels to restore appliance appearance and model information display.

This replacement appliance label provides the factory identification and safety information fastened to the appliance so you can read model/serial and safety/warning text clearly. It restores legible markings for servicing and ownership records. What it does

• Shows the appliance identification, model/serial or rating area and factory safety/warning text so technicians and owners can service data.
• Helps ensure required safety and operating instructions remain visible and readable.
• Replaces a torn, faded, or missing label that can make identification and troubleshooting harder.
• Supports accurate parts ordering and service by restoring the original markings.

• One replacement label

• Peel-and-stick replacement; clean and dry the surface thoroughly before applying.
• Align carefully and press from one edge to the other to avoid bubbles; firm pressure ensures adhesion.
• Do not stretch or trim the label unless explicitly specified by the equipment instructions.
• For safety, disconnect power or follow manufacturer safety precautions before working near electrical components.

Microwave grease filter traps cooking oils and odors. Replace when discolored or clogged to maintain ventilation efficiency. Confirm fit with your model.

Traps grease and smoke from cooking. Replace when clogged or damaged to maintain ventilation efficiency. Verify compatibility with your model number.

Controls airflow in your microwave's exhaust vent system. Installs between blower and duct. Replace if cracked, broken, sticking, or missing.

Almond screw for microwave vent grille assembly. Replace if missing, stripped, or broken. Secures the exterior grille panel to the unit housing.

Replacement mounting screw for microwave panels, brackets, and trim. Needed when original fastener is missing, stripped, or damaged during repair work.

Screw secures the door latch and upper hinge plate on your microwave. Replace if missing, stripped, or loose to properly fasten door hinges and latch.