Parts for Frigidaire GLMV169DBD: 03 - Oven / Cabinet Parts

Microwave won't heat but runs normally? A failed diode prevents power conversion to the magnetron. This part restores heating in most microwaves.

Microwave won't heat or makes humming noise? This capacitor works with the magnetron to generate heat. Moderate difficulty repair, 30-45 minutes.

Microwave turntable stopped spinning? This motor restores rotation to your carousel platter. Simple DIY repair—three screws and one plug. 5-10 minutes.

Fixes microwave that won't power on or shuts off unexpectedly. This thermal cutout switch prevents overheating by cutting power when temps get too high.

Microwave not heating but runs normally? A failed magnetron is the likely cause. This repair restores heating function. Moderate DIY difficulty.

Microwave runs but won't heat, or stays on when door opens? A faulty door switch is the likely cause. DIY repair takes about 30 minutes with basic tools.

Fix a microwave that won't start or only works when you lift the door. This switch kit restores reliable power control. Moderate DIY repair.

Replacement power cord for your microwave. Connects the appliance to your electrical outlet. Order a new cord if yours is frayed, damaged, or missing.

Microwave not cooling or fan not running? This motor drives the cooling fan to prevent overheating. DIY-friendly repair restores proper ventilation.

Restores interior and cooktop lighting in your microwave. Replace when bulb burns out or dims for clear visibility. Verify fit with your model number.

Fix a microwave that won't heat properly or shuts off early with a new temperature sensor. This part monitors internal temperature for safe operation.

Replace your microwave's mounting plate if it's cracked, bent, or missing. This structural component secures the microwave during installation.

Black cooktop assembly cover panel for microwaves. Replaces cracked, broken, or missing trim pieces. Restores the finished appearance of your unit.

Black cooktop cover for your microwave. Replaces cracked, broken, or missing covers. Restores the appearance of your appliance's cooktop area.

Glass cover for microwave hood lamp. Protects the light bulb from grease and debris. Replace if cracked, broken, or missing to restore proper lighting.

Mounting plate cover for your microwave. Installs on the support bracket assembly. Replace if cracked, broken, or missing to restore proper appearance.

Replacement cushion for your microwave door or cabinet. Installs to provide cushioning and prevent impact damage. Order a new cushion if worn or missing.

Controls airflow in your microwave's exhaust vent system. Installs between blower and duct. Replace if cracked, broken, sticking, or missing.

Secures microwave components to cabinet or frame. Replace when bracket is broken, cracked, or worn causing misalignment or excess vibration during operation.

Glass turntable tray for microwaves. Replaces cracked, broken, or missing rotating platters. Installs on turntable support to hold dishes during cooking.

Microwave won't turn on, made popping noise, or smells like burned electrical? The noise filter often fails when solder joints arc or short out.

This bushing guides and supports a rotating shaft to reduce wear and keep moving parts aligned, restoring smooth, quiet operation. Fits specific Frigidaire appliances—use the OEM part number to fit for your model. What it does

• Supports a rotating shaft or drum to prevent metal-on-metal contact
• Reduces friction and wear that can cause squeaks, grinding, or rough rotation
• Helps maintain proper alignment for consistent appliance performance
• Commonly replaces worn or damaged bushings that allow excessive play

• Disconnect power before servicing and access the affected assembly per your model's service manual
• Remove the worn bushing and any debris; press or tap the new bushing into place squarely
• Inspect mating shaft/surface for scoring or wear; replace or repair if damaged
• Use only OEM-recommended lubricants if specified by the manufacturer; do not assume grease is required

Secures your microwave door to engage the safety switches. Replace if the hook is cracked, broken, or worn, preventing the door from latching properly.

Secures your microwave to the wall or cabinet during installation. Replace this bracket if the original was lost, damaged, or missing during remodeling.

This small rubber bumper cushions and protects the appliance door and cabinet by absorbing impact and preventing metal-to-metal contact. It helps reduce door noise and wear for a quieter, smoother close. What it does:

• Acts as a door stop/cushion to prevent direct contact between the door and cabinet
• Reduces rattling, clanking, and vibration during door movement
• Helps maintain a proper door seal by stabilizing door position
• Commonly replaced when cracked, flattened, missing, or causing noise

• Usually installs by pressing into a pre-formed hole or onto a mounting peg; no special tools required
• Verify exact mounting location before removal; keep track of orientation for re-installation
• Disconnect power only if working near electrical components; this is typically a non-electrical part
• Inspect surrounding area for additional wear or missing fasteners while replacing

Replaces the aluminum lens lamp filter in your microwave. Installs behind the hood louver. Order when filter is damaged, worn, or missing. Washable design.

Metal support bracket for microwave mounting and internal component stability. Replace if bent, cracked, or missing to restore proper structural support.

Replacement interior support plate for microwaves. Mounts inside the cavity to provide structural support. Order a new part if yours is cracked or broken.

This replacement duct guides internal airflow to and from the appliance, restoring proper ventilation and helping the unit maintain even temperatures. Designed to match the original fit and routing for reliable performance. What it does:

• Channels conditioned or exhaust air through the correct internal path
• Helps prevent airflow restrictions that can cause uneven cooling or heating
• Reduces rattling or vibration from a damaged or misrouted air path
• Supports normal compressor/fan operation by maintaining intended ventilation

• One replacement duct as shown

• Inspect surrounding connectors and seals; replace damaged gaskets for best results
• Secure all fasteners to prevent air leaks
• Disconnect power (and water if applicable) before beginning work to avoid injury
• Avoid sharp bends that can restrict airflow

Replace the waveguide cover in your microwave if it's cracked, burned, or missing. This protective panel shields internal components from food splatter.

Replacement waveguide cover for your microwave. Installs over the magnetron antenna opening. Replace if cracked, burned, greasy, or missing.

Microwave not heating or won't start? This thermal cutout fuse protects against overheating. Quick DIY fix—test for continuity with a multimeter.

Replacement turntable support for your microwave. Installs under the glass tray to allow smooth rotation. Replace if cracked, broken, or worn out.

Replacement turntable support for your microwave. Mounts under the glass tray to enable smooth rotation. Order a new support if yours is cracked or broken.

This replacement appliance label provides the factory identification and safety information fastened to the appliance so you can read model/serial and safety/warning text clearly. It restores legible markings for servicing and ownership records. What it does

• Shows the appliance identification, model/serial or rating area and factory safety/warning text so technicians and owners can service data.
• Helps ensure required safety and operating instructions remain visible and readable.
• Replaces a torn, faded, or missing label that can make identification and troubleshooting harder.
• Supports accurate parts ordering and service by restoring the original markings.

• One replacement label

• Peel-and-stick replacement; clean and dry the surface thoroughly before applying.
• Align carefully and press from one edge to the other to avoid bubbles; firm pressure ensures adhesion.
• Do not stretch or trim the label unless explicitly specified by the equipment instructions.
• For safety, disconnect power or follow manufacturer safety precautions before working near electrical components.

Label for built-in microwaves and wall oven combos. Replace worn, faded, or missing labels to restore appliance appearance and model information display.

Charcoal air filter captures grease, smoke, and odors in over-the-range microwaves. Replace when performance declines. Confirm fit with your model number.

Traps grease and smoke from cooking. Replace when clogged or damaged to maintain ventilation efficiency. Verify compatibility with your model number.

Secures panels and components inside your microwave, keeping parts aligned and reducing rattles. Replace when clip is broken, cracked, or missing.

Replacement mounting screw for microwave panels, brackets, and trim. Needed when original fastener is missing, stripped, or damaged during repair work.

Replacement mounting screw for microwave panels, brackets, and trim. Needed when original fastener is missing, stripped, or damaged during repair work.

Screw secures the door latch and upper hinge plate on your microwave. Replace if missing, stripped, or loose to properly fasten door hinges and latch.

Single replacement screw for microwaves. Secures panels, trim, brackets, and internal components. Replaces worn, stripped, or missing fasteners.

Mounting screw for microwave cutout switch assembly. Secures the switch in place during installation. Order a replacement if lost or stripped.

Replacement screw fastener for microwaves. Secures panels, brackets, and trim pieces in place. Needed when original screws are stripped, lost, or missing.