Parts for Ge PVM9179DK2BB: Oven Cavity Parts (2) Parts

A replacement bottom lamp bracket that secures the refrigerator light assembly so the bulb and socket stay properly positioned. Restores a stable lamp mount for reliable interior lighting. What it does:

• Holds the lamp housing or socket at the bottom of the compartment so the bulb stays aligned
• Prevents the light assembly from shifting or rattling when the door opens and closes
• Helps ensure the bulb makes proper contact with the socket for consistent illumination
• Useful when the original bracket is cracked, broken, or missing

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove the bulb and any trim panels needed to access the bracket
• Replace bracket using existing screws or clips; do not overtighten fasteners
• If the light still fails after bracket replacement, inspect the bulb and socket for damage

This halogen lamp socket provides a safe connection point for the oven/stove halogen light, restoring interior illumination for cooking and inspection. It secures the lamp and transfers power so the bulb can operate reliably. What it does:

• Holds the halogen bulb and provides the electrical contacts needed for the lamp to light
• Restores oven interior light when the old socket is burnt, loose, or corroded
• Helps stop intermittent lighting and flicker caused by poor contacts
• Compatible with in-oven halogen style lamps that use a matching socket connection

• One halogen lamp socket

• Disconnect power to the appliance at the breaker before servicing to avoid shock
• Allow the appliance and bulb to cool completely before touching the socket or lamp
• Inspect wiring and connectors; replace damaged wiring per manufacturer guidance
• After installing, restore power and confirm the lamp operates; use only the specified bulb type and wattage

This is the clear glass lens that covers the cooktop light on select GE over-the-range units. It shields the bulb from grease and splatters while allowing bright, even illumination of the cooking surface below.

• Protects the cooktop light bulb from grease, moisture, and debris
• Restores proper lighting if the original lens is missing, cracked, or stained
• Helps maintain safe, even illumination of the range area
• Common symptoms: broken or missing lens, dim or uneven light due to a damaged cover

• Disconnect power to the appliance before servicing
• Allow bulbs and surrounding area to cool completely
• Handle glass carefully to avoid chipping; wear cut-resistant gloves
• Ensure the lens seats fully and any retaining tabs/screws are secured per the product's service instructions

The Glass Light Lens is an OEM part for GE microwaves. It covers the light bulb inside the microwave, protecting it from food splatters and ensuring even illumination.The lenses measure approximately 7" x 3".

Causes of a bad glass light lens can include accidental impact, exposure to high heat, or general wear and tear.

Symptoms of a bad glass light lens include:

• Cracks or breaks in the glass
• Diminished visibility inside the microwave
• Light not being properly diffused
• Potential exposure of the light bulb to food splatters

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This spring blade is a small metal tension spring that restores proper tension and movement in the appliance's linkage or latch assembly. It replaces worn or broken blades to help restore normal door or component action. What it does:

• Provides tension and return force in linkage, latch or lever assemblies
• Helps stop sagging, slipping or loose movement in the affected mechanism
• Can reduce related rattling or binding caused by a worn spring blade
• Restores reliable engagement where a broken or fatigued blade allowed failure

• Unplug the appliance or shut off power before starting any repair
• Verify orientation and engagement of the blade before final assembly
• Use proper hand tools; the blade may be under tension—wear safety goggles and gloves
• If the assembly uses multiple springs, replace all worn parts to ensure balanced function

This thermal cut-off installs in the bottom location and protects the appliance by interrupting power when excessive heat is detected. It helps prevent overheating-related damage to internal components.

• Monitors temperature at the bottom of the unit and opens the circuit if an over-temperature condition occurs
• Common symptoms include no power, shutting off during use, or not starting after an overheating event
• The TCO tests open (no continuity), it must be replaced

• Disconnect power before servicing; microwaves contain a high-voltage capacitor that must be safely discharged
• Note wire positions and mounting orientation; transfer any reusable bracket/insulator and make secure, insulated connections
• After reassembly, ensure airflow and vents are unobstructed to prevent repeat overheating

This thermostat switch is a temperature-sensitive safety device used in select appliances to open or close an electrical circuit at a set temperature. Replacing a failed switch helps restore proper temperature control and protects components from overheating.

• Monitors temperature and changes state (open/closed) at its calibration point
• Helps prevent overheating or incorrect temperature regulation
• Common failure signs: no heat/overheating, intermittent cycling, or unit shutting off prematurely
• May be mounted to a bracket or surface near the heated area, depending on the model

• Disconnect power before servicing; verify no voltage is present
• Note wire positions and orientation of the original switch before removal
• Transfer any mounting hardware from the old part if not reusable
• After installation, test operation and observe initial heating cycle for proper function

This blade fan is the rotating plastic fan blade that moves cold air across the evaporator and through the fresh-food compartment to help maintain even refrigerator temperatures. It replaces a worn or damaged blade to restore airflow and cooling performance. What it does:

• Spins on the evaporator/evaporator motor shaft to circulate cold air through the freezer and refrigerator sections
• Helps reduce warm spots and slow cooling caused by a cracked, chipped or missing blade
• Commonly replaced when fan noise increases, the fan wobbles, or airflow is reduced
• Works with the existing evaporator fan motor and mounting hardware to re-establish proper circulation

• One blade fan

• Unplug the appliance and/or shut off power at the breaker before servicing
• Remove interior panels and ice/water components as needed to access the evaporator fan area
• Handle the plastic blades carefully to avoid cracking; ensure the blade is fully seated on the motor shaft

This fan motor spins the oven/convection fan to circulate heat for even cooking and help exhaust hot air. Replaces a worn or noisy motor to restore proper airflow and temperature consistency in the appliance. What it does:

• Drives the convection/circulation fan blade to move air through the oven cavity
• Helps maintain even cooking and consistent oven temperatures
• Reduces buzzing, grinding, or failure-to-spin symptoms when the old motor is failing
• Works as the mechanical drive for air exhaust and internal circulation systems

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the motor and wiring gently; match mounting orientation and connector type during install
• Verify blade and shroud clearance before powering the unit

This guide roller assembly supports and guides the rotating drum, restoring smooth, low-friction movement for normal operation. It helps reduce noise and wobble caused by worn or damaged rollers. What it does

• Supports the drum and keeps it aligned during rotation to prevent rubbing or scraping.
• Reduces friction and wear between the drum and cabinet.
• Common symptom: loud rumbling, grinding, or increased vibration during operation.
• Common symptom: drum misalignment or uneven rotation.

• One guide roller assembly.

• Disconnect power before starting any repair to avoid shock or injury.
• Access may require removing the dryer cabinet or front panel—follow your model's service manual.
• Inspect related parts (belt, idler, drum glides) and replace if worn to prevent repeat failure.

The Cooking Tray is an OEM replacement part for GE microwaves, designed to support and rotate food for even cooking. This glass tray fits within GE microwave models, allowing for the optimal distribution of microwave energy throughout the food. By rotating, it ensures that meals are evenly heated, preventing cold spots and promoting a uniform cooking process. Microwave Glass Turntable Tray, 12 1/2" Dia. Might Be Smaller Than Original.

Causes of a bad Microwave Cooking Tray can include cracking, chipping, or breaking due to accidental drops or heavy impact. Over time, repeated use can also wear down the tray, potentially compromising its structural integrity.

Symptoms of a bad Microwave Cooking Tray include:

• Inability to rotate, affecting the microwave's ability to cook food evenly.
• Unstable movement or wobbling during operation.
• Cracks or breaks in the tray, which can lead to unsafe conditions or further damage to the microwave.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This hood damper assembly opens to allow exhaust airflow and closes to help block outside drafts and odors when the fan is off. It restores proper venting and prevents back-drafts in over-the-range hoods and microwaves. What it does:

• Opens with the vent fan to let cooking smoke and steam exit the home.
• Closes when the fan is off to reduce backdrafts, outside air, and odors.
• A faulty or stuck damper can cause reduced airflow, rattling noises, or air blowing back into the kitchen.
• Works as the moving flap between the appliance exhaust and the ductwork to control airflow direction.

• Disconnect power to the appliance (unplug or shut off the circuit breaker) before servicing.
• Access typically requires removing the hood or microwave grille/cover; keep track of screws and mounting hardware.
• Basic hand tools (screwdrivers, possibly a nut driver) are usually sufficient; handle the damper flap gently to avoid bending.
• After installation, restore power and run the fan to ensure the damper opens and closes smoothly.

This holder nut assembly secures a component to the appliance frame, restoring proper mounting and reducing vibration or movement. Replace a damaged or missing holder nut to keep connected parts stable and functioning. What it does:

• Secures a component or assembly to the appliance frame or mounting bracket
• Prevents looseness, rattling, and misalignment caused by worn or missing mounting hardware
• Restores a safe, stable connection that helps maintain normal operation
• Matches OEM mounting geometry for a direct replacement when the original nut is damaged

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access the mounting area by removing the appropriate panel or cover per your model's service instructions
• Start threads by hand to avoid cross-threading, then tighten with the correct tool; do not overtighten
• If any fasteners or nearby components are damaged, replace them as needed for a secure installation

This mounting plate assembly is the rear wall bracket that supports and secures the microwave during installation. Replacing a bent or missing plate ensures a safe, level mount and stable operation without vibration or shifting.

• Acts as the rear-wall support the microwave hangs on and bolts to
• Maintains proper, level alignment of the unit and door
• Helps prevent vibration, rattling, or shifting during use
• Replace if the plate is bent, damaged, corroded, or missing

• Disconnect power and have a second person support the microwave before removal/installation
• Follow your model's installation template and manual for hole locations and hardware
• Fasten to wall studs or appropriate anchors; level the plate before tightening
• Verify clearances and door swing before fully tightening mounting hardware

The Rack-Wire is an OEM part for GE microwaves. It provides height-adjustable shelving for organized food placement during heating cycles.

Causes for replacement include bent or misshapen wires distorting the intended spacings over time. Peeling or flaking of protective chrome finishes can also occur due to high-temperature heating cycles.

Symptoms of a faulty rack-wire include:

• Sagging wires no longer maintaining fixed dimensions
• Slippage or movement during active cooking cycles
• Inability to properly space multiple dishware levels
• Excessive rusting or flaking from interiors

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

This oven temperature sensor detects cavity temperature and helps the range control maintain correct cooking heat. Replacing a worn sensor restores more accurate temperature readings and more consistent baking and roasting results. What it does:

• Measures oven cavity temperature and sends that signal to the control board
• Helps the oven reach and hold set temperatures for reliable cooking
• Common symptom: oven not reaching or maintaining set temperature
• Common symptom: cooking results are inconsistent or temperatures read incorrectly

• Disconnect power to the appliance before starting any repair
• Handle the sensor carefully; avoid bending or damaging the probe and wiring
• Install in the original mounting location and secure connector to the harness