Parts for Lg LMV2031BD: Oven Cavity Parts

This auxiliary burner holder mounts on your gas cooktop or range and supports the smaller auxiliary/simmer burner. It properly positions the flame ports and igniter for reliable lighting and an even, stable flame.

• Supports and locates the auxiliary burner over the gas orifice
• Aligns with the igniter for quick, consistent ignition
• Helps maintain even flame distribution and low-heat control
• Common signs of failure: burner won't light or lights intermittently; uneven/yellow flames; burner cap won't sit level or wobbles

• Turn off gas supply and disconnect power; allow the appliance to cool completely.
• Remove grate, burner cap, and burner head from the affected position.
• Note the holder's orientation; detach the old holder and clean the mounting surface.
• Align the new holder with the gas orifice and igniter, secure with the original screws, reassemble, and test burner operation.

This part mounts on the cooktop and supports the small "auxiliary" burner assembly. It channels gas from the orifice to the burner head so the simmer burner lights reliably and produces a steady, even flame.

• Secures and centers the auxiliary burner head/cap on the cooktop
• Directs gas flow from the orifice to the burner head for proper combustion
• Helps position the igniter adjacent to the burner head for reliable lighting
• Common symptoms include hard-to-light or non-igniting small burner, uneven/weak flame, or a burner head that won't sit level due to a damaged base

• Shut off gas supply and disconnect power; allow the surface to cool completely
• Remove grates, burner caps, and burner heads to access the base; remove mounting hardware
• Transfer existing components (such as the orifice holder and igniter) to the new base
• Reassemble, restore gas, and check all connections for leaks before use

This replacement door glass restores a clear viewing window and the protective barrier on your microwave door. Replace it when the original panel is cracked, shattered, or heavily scratched to keep the door secure and safe to use.

• Provides the see-through window and protective barrier within the microwave door
• Helps maintain proper door rigidity and alignment when intact
• Replace if the glass is cracked, chipped, shattered, loose, or badly scratched
• Reduced visibility, rattling, or visible damage are common symptoms of failure

• Unplug the microwave before servicing; microwaves can retain high voltage—use caution and do not open the cabinet
• Support the door; removal from the hinges may be required per your model's diagram
• Handle glass with cut-resistant gloves; edges can be sharp
• Transfer any reusable trim/clips as directed and verify the door latches and closes properly after installation

Replacement refrigerator shelf that restores usable storage space and support for food and containers. Helps keep items organized, prevents spills, and returns a stable surface after a cracked, chipped, or missing shelf. What it does:

• Provides a flat, supportive surface for storing food, containers and small appliances
• Replaces cracked, chipped or missing shelving to restore usable interior space
• Helps reduce spills and keeps items from shifting when the door is opened or closed
• Seats into the refrigerator's existing shelf supports to re-establish stable storage

• Remove the old shelf per your owner's manual by lifting or sliding it out of the shelf supports
• Handle carefully; wear cut-resistant gloves if replacing a cracked or broken glass shelf
• Place the replacement shelf into the same supports—do not force or bend the shelf

The Grille, Vent is an OEM part for LG microwaves. The grille measures approximately 23 x 3.75 inches and is designed to cover components inside your microwave. Positioned typically at the top or front of the microwave, this grille ensures that the appliance maintains an optimal temperature, preventing overheating and ensuring efficient operation.

Symptoms of a failing Vent Grille include:

• Excessive steam or heat buildup within the microwave
• The microwave overheating during use
• Noise or vibration due to loose or damaged grille components
• Visible signs of wear, such as cracks, warping, or discoloration on the grille

Causes of a bad vent grille can include physical damage from routine cleaning or use, warping due to exposure to high temperatures, or blockages from accumulated grease and debris which can restrict airflow.

The Grease Filter is an OEM replacement part for LGmicrowaves. It plays a vital role in capturing grease, smoke, and odors generated during cooking, ensuring cleaner air in the kitchen. Regular cleaning or replacement of the microwave grease filter is essential for maintaining optimal airflow, filtration performance, and preventing potential fire hazards.

Causes of a bad grease filter include excessive use without proper cleaning, exposure to high temperatures or grease splatters, or simply reaching the end of its lifespan due to regular wear and tear.

Symptoms of a clogged or defective microwave grease filter:

• Reduced airflow or suction from the microwave ventilation system
• Unpleasant cooking odors lingering in the kitchen
• Visible buildup of grease or grime on the filter or surrounding areas
• Clogged or obstructed air vents or ductwork

This OEM LG part is also compatible with Sears/Kenmore microwaves.

The Halogen Lamp is an OEM part for LG microwaves. This lamp is designed to provide illumination underneath or inside the select microwaves, allowing for better visibility inside the cavity or the cooking space below the microwave. 

Causes of a bad part can include the lamp reaching the end of its lifespan due to normal use, electrical issues causing premature burnout, or physical damage from impact or exposure to heat.

Symptoms of a bad Halogen Lamp include:

• Dimming or flickering of the lighting
• Complete failure of the light to turn on
• Visible damage or burn marks on the lamp itself

This OEM LG part is also compatible with some Kenmore models.

This bracket assembly provides a secure mounting point for internal components, keeping parts aligned and stable for reliable appliance operation. It restores proper support where a worn or broken bracket causes rattling or misalignment. What it does:

• Secures and supports internal components or panels to prevent movement and vibration
• Restores proper alignment for parts that have shifted due to a damaged bracket
• Helps eliminate rattling, knocking, or loose-panel noises caused by broken mounting points
• Maintains spacing that ensures connected parts operate smoothly

• Disconnect power before beginning any repair to avoid electrical shock
• Inspect surrounding fasteners and mounting surfaces; replace any stripped screws or damaged clips
• Use appropriate hand tools; avoid over-tightening fasteners which can crack plastic parts

This Nut Assembly is a threaded fastener used to securely hold an associated component inside the microwave. Replacing a worn, stripped, or missing nut helps reduce vibration, eliminates rattling, and keeps parts properly aligned during operation.

• Provides a secure threaded anchor point for the matching screw/bolt
• Helps maintain alignment and prevent vibration or rattling
• Replaces stripped, cracked, or missing hardware
• Addresses symptoms like loose or shifting components and recurring rattling noises

• Disconnect power; if built-in, switch off the circuit breaker
• Access the mounting location, remove damaged hardware, and install the new nut assembly
• Avoid overtightening to prevent damage to threads or surrounding material

This resin cover protects internal components by shielding them from debris, moisture and accidental contact. It helps maintain safe operation and prevents damage to wiring and nearby parts when in good condition. What it does:

• Shields control components and wiring from dust, spills and physical contact
• Maintains correct component spacing and mounting alignment inside the appliance
• Reduces vibration noise caused by loose or damaged covers
• Replace if cracked, broken, warped or missing to prevent exposure and potential damage

• Disconnect power and unplug the appliance before starting any repair
• Handle part carefully to avoid cracking; use appropriate fasteners as originally installed
• Verify correct orientation and secure mounting to restore original protection

This part is the base for the small simmer burner on gas cooktops. It supports the burner cap and channels gas to the flame ports to promote consistent ignition and an even, stable flame. What it does

• Serves as the burner base for the auxiliary/simmer position
• Aligns and supports the burner cap for even flame distribution
• Routes gas from the orifice to the burner ports
• Common symptoms include weak or uneven flames, difficulty lighting with a known-good spark, or a cap that won't sit flat

• One auxiliary burner holder

• Disconnect power and shut off the gas supply before servicing
• Remove the grate and burner cap; take out mounting screws and lift off the old holder
• Transfer/reuse the orifice, igniter electrode, gasket, and hardware as applicable; seat the new holder evenly and tighten fasteners without over-torquing
• Restore gas and power; verify proper ignition and flame