Kenmore Dryer 110.97574820 (11097574820, 110 97574820) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98997
$7.48
- Compare At:
-
$7.65
- You Save:
-
$0.17
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10366705
This replacement mounting screw secures appliance panels and small components to restore proper fit and reduce movement. It's a simple, direct part for repairing loose panels, trim, or interior assemblies. What it does:
- Fastens panels, brackets, or assemblies to prevent rattling and vibration
- Restores proper alignment for doors, control panels, or trim pieces
- Helps stop intermittent noise caused by loose hardware
- Use when original screw is missing, stripped, or corroded
What's included: One mounting screw Install notes:
- Disconnect power and unplug the appliance before beginning any repair
- Use the correct screwdriver bit and hand-tighten; avoid over-torquing which can strip threads
- Keep small parts away from children and pets; magnetic tray helps prevent loss
- If multiple screws are corroded or hardware threads are damaged, inspect mating parts and replace as needed
More
$4.95
- Compare At:
-
$5.84
- You Save:
-
$0.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3397269
$18.27
- Compare At:
-
$21.74
- You Save:
-
$3.47
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 686889
This blower-housing pad is a replacement foam/rubber seal that cushions the blower assembly and helps maintain proper airflow and fit. It restores the original fit between the blower housing and cabinet to reduce vibration and air gaps. What it does:
- Cushions and supports the blower housing to reduce noise and vibration during operation
- Helps seal the blower housing to prevent air leaks that can reduce performance
- Maintains proper alignment and spacing of the blower assembly inside the cabinet
- Common symptom: excessive vibration, rattling, or airflow leakage near the blower area
What's included: One blower-housing pad Install notes:
- Designed for direct replacement; part number matches your unit before ordering
- Turn off power to the appliance at the breaker before beginning repair
- Handle foam/rubber parts gently to avoid tearing; ensure pad seats fully around the housing
- If other blower components are worn or damaged, inspect and replace as needed
Do-It-Yourself Stories from Customers like You
Thermal fuse had blown and wire had melted as a result Benjamin S. • Portland , ME • July 02, 2018
I replaced the thermal cutoff kit and a heating element connection wire. Super simple and probably saved me over $100 if I had called a repairman. The videos on your site as well as the customer service person I spoke with were SUPER helpful. Thank you!!!
Read more
More
$22.95
- Compare At:
-
$27.08
- You Save:
-
$4.13
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10295523
This pipe plug seals an unused or service opening in a household appliance's plumbing to stop leaks and prevent debris entry. It restores a watertight closure so the appliance can operate safely and without water loss. What it does:
- Plugs open pipe or hose fittings to prevent water leaks
- Helps maintain proper water flow by sealing unused ports
- Keeps debris and contaminants out of the plumbing system
- Can stop intermittent drips originating from service openings
What's included:
Install notes:
- Turn off water supply and power to the appliance before starting work
- Hand-start threads to avoid cross-threading; tighten only to OEM torque or finger-tight plus a quarter-turn if unspecified
- If the original used sealant or gasket, replace with the same type per OEM instructions
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3399964
$7.49
- Compare At:
-
$8.91
- You Save:
-
$1.42
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 341029
$8.45
- Compare At:
-
$10.14
- You Save:
-
$1.69
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 694421
$16.95
- Compare At:
-
$20.17
- You Save:
-
$3.22
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 279048
L205-40. Dryer
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
No heat Robert F. • Fort Waayne , IN • March 31, 2016
Found that when I "jumped" the hi limit thermostat the gas valve operated.
So just went ahead and
R/R the Hi limit thermostat, thermo-fuse, and the cycling thermostat.
No problems.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 279536
Genuine Whirlpool part
By: Whirlpool
Part Number: WP341196
Do-It-Yourself Stories from Customers like You
The dryer was not heating. Lynn G. • Geneva , OH • June 07, 2022
Replaced some thermal cut-offs and a cycling thermostat.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 486146
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3394196
Do-It-Yourself Stories from Customers like You
The motor on our clothes dryer was doing a "self protection" thermal or overload shutdown and there was a strong odor in the tub Jim S. • Fallon , NV • November 27, 2015
It took two repair attempts to fix the dryer. At first, I noticed that the rear felt seal was completely worn out, so I thought that extra friction between the tub and the rear panel might be causing the motor to have to work too hard and overheat. I ordered a new seal from appliancepartspros.com, and installed it according to their instructional video, but it did not correct the problem. Then I decided that the motor must be going bad, so I watched the on-line video on how to remove the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285508
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3394975
Do-It-Yourself Stories from Customers like You
Missing front panel plug & burned out light bulb in dryer drum Will S. • Shelby Township , MI • September 28, 2015
When I found the dryer off Craigslist, I didn't notice until recently the front panel plug was missing. I ordered the plug from Appliance Parts Pros, got the part & installation took seconds as it was a snap-in part. Couldn't be any happier. Also discovered the drum would not light up when the door opened. Ordered the bulb also from Appliance Parts Pros. Unplugged the dryer, unscrewed the lens cover, removed the burned bulb, cleaned out the light area, installed the bulb, replugged the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3977746
Do-It-Yourself Stories from Customers like You
The lever to turn on dryer was broken the handle was broken and the latch was broken David R. • Jemison , AL • February 09, 2015
I opened the top of the dryer (after watching the video on your website) and replaced the lever on the switch. Removed two screws near the lint filter, used a putty knife to release fasteners under the top and raised the top. Held it in place with a short piece of board then removed the two screws holding in the switch and lever. Replaced the broken lever with the new one and put it all back together. The handle was a little more difficult as it took a lot more prying with a screwdriver to...
Read more
More