Kenmore Dishwasher 363.14482100 (36314482100, 363 14482100) Parts
Genuine Ge part
By: Ge
Part Number: WD27X10254
$42.95
- Compare At:
-
$132.34
- You Save:
-
$89.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD27X10255
$118.95
- Compare At:
-
$140.36
- You Save:
-
$21.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD2X248
This is a replacement fastener screw used to secure panels and components on compatible appliances, restoring proper fit and reducing movement. It's a simple, direct replacement when an original screw is missing or damaged. What it does:
- Secures access panels, covers, or internal components to prevent rattling and movement
- Helps maintain proper alignment of parts so doors and panels close correctly
- Replaces missing, stripped, or broken screws that can cause loose parts or noise
- Restores the appliance's original fit where a matching OEM fastener is required
What's included:
Install notes:
- Turn off and unplug the appliance before starting any repair
- Use the correct driver and avoid over-tightening to prevent stripping threads
- If the original screw was holding electrical components, ensure power is disconnected and follow OEM safety instructions
More
$4.43
- Compare At:
-
$8.36
- You Save:
-
$3.93
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD2X432
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD2X434
Bisque. 8-18 x 5/16 inch.
More
$5.95
- Compare At:
-
$8.36
- You Save:
-
$2.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD31X10026
This long front panel replaces a damaged or worn control-area panel to restore the range's appearance and provide a secure mounting surface for control components. It fits the long control area used on select GE ranges. What it does:
- Replaces cracked, dented or heavily scratched front/control-area panels to improve appearance
- Provides the mounting surface and alignment for control switches and trim
- Helps keep internal components shielded from spills and debris near the controls
- Restores a flush fit where the original panel was warped or bent
What's included: One long front panel Install notes:
- Disconnect power to the appliance (unplug or switch off breaker) before starting work
- Remove control knobs and any trim pieces to access mounting screws; keep original fasteners for reassembly
- Handle the panel carefully to avoid cuts from sharp edges and to prevent cosmetic damage
- Take care when disconnecting and reconnecting wiring;
Do-It-Yourself Stories from Customers like You
The metal split apart at the right hinge (bottom right hand corner) leaving only the door liner holding it up putting stress splits in the liner Robert H. • Las Vegas , NV • May 10, 2016
I had to replace the outer door panel, the metal part of the door, bottom 3/4 that attaches to the controls panel.
The hardest part was removing the screws in the hinge, since you need gorilla strength to pull it downward while removing the mounting screws that connect the door to the hinge. The metal was broken completely, so the hinge was in the closed position.
I used a regular phillips screwdriver and a newer version of a cross between a phillips and an allen wrench. It's got a hexagon...
Read more
More
$127.95
- Compare At:
-
$152.26
- You Save:
-
$24.31
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD1X1472
$6.06
- Compare At:
-
$8.69
- You Save:
-
$2.63
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD06X10004
$55.76
- Compare At:
-
$58.68
- You Save:
-
$2.92
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD27X10061
$16.59
- Compare At:
-
$21.96
- You Save:
-
$5.37
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD27X10078
$103.55
- Compare At:
-
$140.83
- You Save:
-
$37.28
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD34X10557
$71.37
- Compare At:
-
$76.36
- You Save:
-
$4.99
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD34X10559
$62.21
- Compare At:
-
$69.19
- You Save:
-
$6.98
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD19X10032
This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.
Do-It-Yourself Stories from Customers like You
Leaking water onto the floor John G. • Canmer , KY • May 28, 2015
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD24X214
Used to supply water to the upper spray washarm.
Do-It-Yourself Stories from Customers like You
Leaking upper spray hose Damon R. • Concord , NC • November 16, 2018
Followed the really great install video from the site. Didn't take long at all.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD24X10015
Do-It-Yourself Stories from Customers like You
Cracked boot on hose Scott C. • Clarklake , MI • July 04, 2015
Ordered new lines took about 2 minutes to replace, using only needle nose pliers to depress the compression clamps
Read more
More
Genuine Ge part
By: Ge
Part Number: WD8X219
Do-It-Yourself Stories from Customers like You
Water would not drain out completely Danny D. • Hookstown , PA • January 18, 2016
The Piston and Nut assembly replaced
Check Valve and Body and gasket replaced
Read more
More