Kenmore Dishwasher 363.14487100 (36314487100, 363 14487100) Parts
Genuine Ge part
By: Ge
Part Number: WD27X10254
$42.95
- Compare At:
-
$132.34
- You Save:
-
$89.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD27X10255
$118.95
- Compare At:
-
$140.36
- You Save:
-
$21.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD2X248
This is a replacement fastener screw used to secure panels and components on compatible appliances, restoring proper fit and reducing movement. It's a simple, direct replacement when an original screw is missing or damaged. What it does:
- Secures access panels, covers, or internal components to prevent rattling and movement
- Helps maintain proper alignment of parts so doors and panels close correctly
- Replaces missing, stripped, or broken screws that can cause loose parts or noise
- Restores the appliance's original fit where a matching OEM fastener is required
What's included:
Install notes:
- Turn off and unplug the appliance before starting any repair
- Use the correct driver and avoid over-tightening to prevent stripping threads
- If the original screw was holding electrical components, ensure power is disconnected and follow OEM safety instructions
More
$4.43
- Compare At:
-
$8.36
- You Save:
-
$3.93
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD2X432
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD2X434
Bisque. 8-18 x 5/16 inch.
More
$5.95
- Compare At:
-
$8.36
- You Save:
-
$2.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD31X10026
This long front panel replaces a damaged or worn control-area panel to restore the range's appearance and provide a secure mounting surface for control components. It fits the long control area used on select GE ranges. What it does:
- Replaces cracked, dented or heavily scratched front/control-area panels to improve appearance
- Provides the mounting surface and alignment for control switches and trim
- Helps keep internal components shielded from spills and debris near the controls
- Restores a flush fit where the original panel was warped or bent
What's included: One long front panel Install notes:
- Disconnect power to the appliance (unplug or switch off breaker) before starting work
- Remove control knobs and any trim pieces to access mounting screws; keep original fasteners for reassembly
- Handle the panel carefully to avoid cuts from sharp edges and to prevent cosmetic damage
- Take care when disconnecting and reconnecting wiring;
Do-It-Yourself Stories from Customers like You
Front panels were rusted John H. • Cape Coral , FL • December 15, 2015
I replaced the front panels and several rusted screws. The hardest parts was removing some of the rusted screws. Had to replace a few of them so there are a few different types now.
Read more
More
$127.95
- Compare At:
-
$152.26
- You Save:
-
$24.31
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD1X1472
$6.06
- Compare At:
-
$8.69
- You Save:
-
$2.63
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD06X10004
$55.76
- Compare At:
-
$58.68
- You Save:
-
$2.92
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD27X10061
$16.59
- Compare At:
-
$21.96
- You Save:
-
$5.37
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD27X10078
$103.55
- Compare At:
-
$140.83
- You Save:
-
$37.28
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD34X10557
$71.37
- Compare At:
-
$76.36
- You Save:
-
$4.99
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD34X10559
$62.21
- Compare At:
-
$69.19
- You Save:
-
$6.98
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD19X10032
This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.
Do-It-Yourself Stories from Customers like You
Leaking water onto the floor John G. • Canmer , KY • May 28, 2015
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD24X214
Used to supply water to the upper spray washarm.
Do-It-Yourself Stories from Customers like You
Leaking upper spray hose Damon R. • Concord , NC • November 16, 2018
Followed the really great install video from the site. Didn't take long at all.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD24X10015
Do-It-Yourself Stories from Customers like You
Cracked boot on hose Scott C. • Clarklake , MI • July 04, 2015
Ordered new lines took about 2 minutes to replace, using only needle nose pliers to depress the compression clamps
Read more
More
Genuine Ge part
By: Ge
Part Number: WD8X219
Do-It-Yourself Stories from Customers like You
Water would not drain out completely Danny D. • Hookstown , PA • January 18, 2016
The Piston and Nut assembly replaced
Check Valve and Body and gasket replaced
Read more
More