Kenmore Dishwasher 587.16252401 (58716252401, 587 16252401) Parts

The Heating Element Nut is an OEM part for Frigidaire dishwashers. It plays a crucial role in securing the heating element in place, ensuring it functions effectively to heat water during the wash cycle. This component ensures the stability and proper operation of the dishwasher's heating element, contributing to the machine's overall efficiency and performance.

Causes of a bad part can include physical damage during maintenance or installation, corrosion over time due to exposure to water and detergents, or general wear and tear that affects its ability to securely hold the heating element in place.

Symptoms of a bad Heating Element Nut include:

• Loose heating element, leading to inefficient heating or water not heating at all
• Water leakage from the heating element area, potentially caused by a poor seal
• Unusual noises during the dishwasher cycle

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It is responsible for removing wastewater from the dishwasher tub during the drain cycle, ensuring that the dishwasher operates efficiently and effectively.

Causes of a bad drain pump assembly can include clogging from food particles and debris, damage to the pump impeller, or electrical failures within the pump motor. Over time, regular use can lead to wear and tear that affects the pump's performance.

Symptoms of a bad drain pump assembly include:

• Water not draining from the dishwasher
• Standing water at the bottom of the dishwasher after a cycle
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dishwasher Door Spring is an OEM part for Frigidaire dishwashers. It helps to balance and support the weight of the dishwasher door, allowing it to open and close smoothly and safely. The spring ensures that the door remains stable at any angle, preventing it from dropping too quickly or not staying open. This spring, 8" in length, is sold individually. 

The door spring may need to be replaced if it becomes worn out, stretched, or broken. Causes of a bad door spring can include frequent use, excessive force when opening or closing the door, and general wear and tear over time.

Symptoms of a bad dishwasher door spring include:

• The door dropping open quickly
• Difficulty in keeping the door open at various angles
• The door not closing properly
• Unusual noises when opening or closing the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Hinge Kit is an OEM replacement part for Frigidaire dishwashers. Located on the left and right side of the dishwasher doorway, the hinges are responsible for supporting the weight of the dishwasher door and facilitating smooth opening and closing. The kit is composed of two brackets and all of the extra hardware needed to install it on a dryer.

Causes of failure include wear and tear of hinge parts over many door openings and closings, damage due to overload or misuse, and deterioration of hinge components exposed to moisture.

Symptoms include:

• Loose or sagging dishwasher door
• Difficulty opening or closing the door
• The door does not stay securely closed during cycles
• Noises or squeaks emanating from hinge areas

This OEM replacement is also compatible with Electrolux, Kelvinator, and some Kenmore models.

The Delivery Tube is an OEM replacement part for Frigidaire dishwashers. This tube is designed to supply water to the upper spray arm from the pump assembly. By doing so, it plays a role in ensuring that the upper rack of dishes receives adequate water coverage for effective cleaning. 

Causes for a malfunctioning Delivery Tube can include blockages from food particles or mineral deposits, general wear and tear from regular use, or damage incurred during maintenance or installation.

Symptoms of a bad Delivery Tube include:

• Inadequate cleaning of dishes on the upper rack
• Water not reaching the upper spray arm
• Unusual sounds during the wash cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dispenser Assembly is an OEM replacement part specific to Frigidaire dishwashers. It is located inside the dishwasher door and is responsible for dispensing the appropriate amounts of detergent and rinse aid during cycles. Due to manufacture changes part received may appear different than what is shown in the photo.

Symptoms of a bad dispenser assembly include:

• Improper dispensing of detergent or rinse aid
• Residual chemical deposits inside the dishwasher
• Inconsistent or insufficient cleaning and rinsing results
• Leaks or drips originating from the dispenser area

Causes of a bad assembly can be worn over time, mineral buildup interfering with components, or damaged dispenser doors that impair chemical release.

This OEM Frigidaire replacement part restores complete dispensing abilities for cleaning cycles. It is also compatible with Electrolux, Westinghouse, and Kenmore models.

The Water Level Float Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It uses a floating switch design to accurately sense water levels filling and draining during cycles. Proper level detection allows for optimized wash and rinse action and water volume control.

Causes of a bad float switch assembly can include wear and tear over many years of use, interfering with free float movement. Mineral or scale deposits may accumulate on float components, inhibiting functionality. Physical damage from impact could introduce leaks.

Symptoms of a bad float switch assembly include issues such as:

• Inability to properly detect water levels
• Long fill or drain times
• Failure to fill or drain completely
• Potential overflow or standing water issues
• Error codes pointing to level sensor faults

This OEM Frigidaire replacement part is also compatible with some Electrolux, Westinghouse, and Kenmore dishwashers.

The Dishrack Roller Assembly is an OEM component specifically designed for Frigidaire dishwashers. It consists of precision ball bearing rollers that allow smooth extension and retraction of the lower dishrack.

Symptoms of a bad roller assembly include:

• The lower rack getting stuck and not fully extending or retracting 
• Scratching or grinding noises coming from the roller area
• Difficulty accessing the lower rack due to poor movement

Causes can be general wear and tear over time, an incident that damaged the rollers, or a malfunction of the guiding mechanisms.

This OEM Frigidaire replacement part is also compatible with some Electrolux, Gibson, and Kenmore models.

The Lower Spray Arm Support is an OEM part for Frigidaire dishwashers. This support provides a secure attachment point for the lower spray arm, ensuring it rotates freely and distributes water evenly throughout the dishwasher for effective cleaning. It helps maintain the stability and proper function of the lower spray arm.

Common causes of a bad lower spray arm support include wear and tear, physical damage from loading or unloading dishes, and blockages that impede the spray arm's movement.

Symptoms of a bad lower spray arm support include:

• The lower spray arm not rotating properly
• Poor cleaning performance on the lower rack
• Unusual noises during the wash cycle
• The lower spray arm falling off or becoming loose

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Inlet Tubing is an OEM part for Frigidaire dishwashers. This tubing allows water to flow from the home's water supply lines into the dishwasher. Properly functioning inlet tubing is essential for supplying water to fill cycles and operate through different wash and rinse cycles.

Causes of a bad water inlet tubing can include mineral or sediment build up inside the tubing restricting water flow, splitting or cracking of the tubing material from stress or age, or damage from sharp objects or wear and tear.

Symptoms of a bad water inlet tubing include:

• The dishwasher failing to fill properly or slowly filling.
• Fluctuations in water pressure during cycles.
• Excessively long fill times.
• None or intermittent water flow into the dishwasher.
• Leaks or water drips around the supply lines.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

A rubber mounting grommet that cushions and positions components to reduce vibration and wear, helping parts seat securely for reliable operation. What it does:

• Cushions and isolates parts to reduce noise and vibration.
• Protects metal components and wiring from abrasion where they pass through openings.
• Helps maintain proper alignment and fit of the mounted component.
• Prevents premature wear by absorbing movement and impacts.

• Disconnect power to the appliance before servicing.
• Press-fit into place; ensure proper orientation and full seating.
• Inspect surrounding parts for damage and replace if worn.
• Use manufacturer-recommended replacement; do not use solvents or adhesives unless specified.

Upper dishwasher washarm delivery tube gasket.

The Dispenser Cap is an OEM part for Frigidaire dishwashers. It is a crucial component of the detergent dispensing system, designed to securely cover and seal the detergent dispenser when the dishwasher is not in operation.

Symptoms of a bad dishwasher dispenser cap:

• Leakage of water or detergent from the dispenser area
• Difficulty in opening or closing the dispenser cap
• The cap not sealing properly, allowing moisture or debris to enter
• Cracks or damage to the cap, preventing a secure fit

Causes of a faulty dishwasher dispenser cap can include wear and tear over time, exposure to high temperatures or harsh detergents, or physical damage from mishandling or impact.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models. 

The Dishwasher Drain Trap is an OEM part for Frigidaire dishwashers. It plays a crucial role in preventing debris from clogging the dishwasher's drain system, ensuring efficient water flow during the wash cycle. The drain trap collects food particles and other debris, preventing them from entering the drain pump and causing blockages.

You should replace this drain trap if it becomes clogged, damaged, or worn out. Causes of a bad drain trap include the buildup of food particles, grease, and other debris over time, or physical damage from sharp objects or mishandling during maintenance.

Symptoms of a bad drain trap include:

• Water not draining properly from the dishwasher
• Foul odors coming from the dishwasher
• Visible debris in the bottom of the dishwasher
• Frequent clogging or backup issues

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Strike is an OEM replacement part for Frigidaire dishwashers. It helps to secure the dishwasher door in the closed position during wash cycles. The door strike works with the door latch mechanism to provide a tight seal to help prevent water, debris, and unwanted odors from escaping the washer interior. 

Symptoms of a bad door strike include:

• The dishwasher door not latching and popping open during cycles
• Leaks or water escaping around the door seal  
• The door not feeling secure when closed
• Increased noise levels from a poor door seal

Over time, the door strike can become worn, bent, or damaged from normal use. Ensure your dishwasher door seals tightly with this genuine OEM Frigidaire replacement part.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Front O-Ring is an OEM part for Frigidaire dishwashers. This component is essential for maintaining a watertight seal in the front areas of the dishwasher's internal systems, such as around the pump or valve connections. It prevents water leaks and ensures the efficient operation of the dishwasher. The rear O-ring is part number AP2109101

Causes of a bad front O-ring can include regular wear and tear, exposure to high temperatures, and chemical degradation from detergents and rinse aids. Over time, the O-ring may dry out, crack, or become deformed, leading to leaks and decreased performance.

Symptoms of a bad front O-ring include:

• Water leaking from the front of the dishwasher
• Puddles forming under the appliance
• Reduced cleaning performance due to water pressure issues
• Noticeable wear, cracks, or deformation on the O-ring

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.