Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore Dishwasher 665.16389300 (66516389300, 665 16389300) Parts

Screen, Pump Sump (Drain Pump Screen)
Genuine Whirlpool part
By: Whirlpool
Part Number: 8268391

This pump sump screen filters lint, debris and small objects from wash water before it reaches the drain pump, helping prevent clogs and pump damage. Replace a cracked or clogged screen to restore proper draining. What it does:

  • Captures lint, coins, hair and small debris before the drain pump
  • Helps prevent pump blockages that cause poor draining or standing water
  • Reduces wear on the drain pump by stopping larger debris
  • Improves overall drain performance when the existing screen is damaged or clogged
What's included: One pump sump screen Install notes:
  • Disconnect power and water before accessing the pump area
  • Remove the washer access panel or cabinet per your model's service instructions to reach the sump
  • Inspect and clean surrounding areas and the pump inlet when replacing the screen

More
$32.95
Compare At:
$39.54
You Save:
$6.59

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Retainer (Flexrow)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268522

A small replacement retainer that secures the FlexRow assembly so the component stays aligned and stable during use. Replacing a worn or broken retainer restores proper positioning and reduces movement. What it does:

  • Holds the FlexRow assembly in place to prevent shifting or sagging
  • Helps maintain correct alignment for even operation
  • Stops clicking, rubbing, or intermittent contact caused by a loose assembly
  • Prevents additional wear on adjacent clips or mounts
What's included: One retainer Install notes:
  • Disconnect power to the appliance before beginning any repair
  • Removal usually requires releasing adjacent clips or fasteners; basic hand tools may be needed
  • Inspect surrounding parts and replace any damaged clips or mounts for a secure fit

More
$11.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Appliance Touch Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 799344

Color: White. Size: 1 qt. can. Acrylic appliance paint.

More
$102.95
Compare At:
$121.48
You Save:
$18.53

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Floor Mount Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 8171477

 

More
$31.95
Compare At:
$37.70
You Save:
$5.75

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Baskt-Ware
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8562090

 

More
$72.23
Compare At:
$85.95
You Save:
$13.72

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Panel-Toe
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10586591

Color: White

More
$140.45
Compare At:
$168.54
You Save:
$28.09

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Panel
Genuine Whirlpool part
By: Whirlpool
Part Number: W11763739

 

More
$23.63
Compare At:
$26.25
You Save:
$2.62

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Capacitor Shield (Protective Cover)
Genuine Whirlpool part
By: Whirlpool
Part Number: 8534946

This replacement capacitor shield protects the appliance's capacitor from debris, contact and shorting, helping extend component life and reduce electrical faults. It installs over the capacitor to block dust, wiring contact and accidental damage. What it does:

  • Covers and protects the capacitor from physical contact, dust and loose wiring
  • Helps prevent short circuits and arcing caused by accidental contact with the capacitor
  • Useful when existing shield is cracked, missing or deformed
  • Can reduce risk of intermittent electrical faults related to exposed capacitor
What's included:
  • One capacitor shield (protective cover)
Install notes:
  • Always disconnect power to the appliance before servicing
  • Capacitors can hold a charge; discharge safely before touching electrical components
  • Remove necessary access panels to reach the capacitor; replace shield without stressing wires

More
$13.48
Compare At:
$16.18
You Save:
$2.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Push On Retainer Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400931

The Whirlpool push on retainer nut is an OEM replacement part responsible for securing the heating element in the dishwasher. It is located in the base of the dishwasher's tub to hold the heating element firmly in place. The push-on retainer nut keeps the heating element securely connected to the dishwasher's electrical system while allowing for easy removal and replacement when necessary.

Over time, push on retainer nuts can become loose, worn out, or damaged due to regular use, vibrations, or accidental mishandling. If a retainer nut fails, it can lead to parts becoming unstable or disconnected.

Symptoms of a bad push on retainer nut include:

  • Loose or unstable dishwasher components
  • Parts falling off or becoming misaligned
  • Unusual noises during the wash cycle
  • Difficulty in securing components within the dishwasher

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models

Do-It-Yourself Stories from Customers like You Our dishwasher would not start.   Rory D. • Fairfield , CA • May 18, 2020

A bit of searching on the internet narrowed the problem down to either the heating element or the control board. As I am not much of a diagnostician I decided to replace both. Along this same line, I would never have attempted these repairs if it hadn't been for the clear, easy to understand repair videos provided for each part. Further, my decision to do my own repairs was made easier because the prices of the parts was so reasonable. I took my time, reviewed the videos and replaced the... Read more

More
Best Seller
Dishwasher Drain Pump
Genuine Whirlpool part
By: Whirlpool
Part Number: WP661658

The Dishwasher Drain Pump is an OEM part for Whirlpool dishwashers. It is responsible for removing water from the dishwasher at the end of each cycle, ensuring that dishes are properly cleaned and dried.

Causes of a bad drain pump can include wear and tear from regular use, blockages from debris, or electrical malfunctions.  

Symptoms of a bad drain pump include:

  • Water not draining from the dishwasher
  • Unusual noises during the drain cycle
  • Error codes related to drainage issues
  • Water pooling at the bottom of the dishwasher

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dishwasher drain pump not working   Steve E. • Tampa , FL • January 14, 2015

When the wife told me the dishwasher was leaving water in the bottom of the tub I hoped it'd be that the filter was just clogged. Nope. We usually clean our dishes before cleaning them which always makes me laugh but the drain was clear after 9 years of use, so I figured it was the pump. This was a $200 minimum for the appliance guy to replace, so I thought I'd try and do it myself. Job wasn't too bad. Found a youtube video from another machine than mine which I hoped would help.. these... Read more

More
Sump Gasket
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268395

 

More
Hanger
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268325

 

Do-It-Yourself Stories from Customers like You Parts had warn and broken off of top rack of dishwasher   Linda M. • Minerva , OH • November 30, 2014

Husband replaced them with new parts we purchased from Appliancepartspros.com. Read more

More
Thermister
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8269208

 

Do-It-Yourself Stories from Customers like You Would not complete a cycle the clean light would flash seven times indicating a faulted heater circuit ohm check good on the element thermistor would not open a 75 to 80 deg   Ralph B. • Watauga , TX • October 21, 2016

Unplug the old twist remove. Push the new one in twist,plug the wires in. Flop around on floor under sink to hook every thing up. Read more

More
Wash Arm Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268332

 

Do-It-Yourself Stories from Customers like You Dishwasher not getting dishes clean   Charlie C. • Alna , ME • August 27, 2017

Replaced upper and lower spray arms and a few other parts. Read more

More
Tube-Feed
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8579224

 

Do-It-Yourself Stories from Customers like You Spinner fell off   Matthias M. • Crystal Lake , IL • November 15, 2014

Replaced tube and spinner Read more

More
Enamel Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392900

Color: Biscuit. Size: 1 qt. can uncut. Enamel paint.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store