Kenmore Microwave 665.63792305 (66563792305, 665 63792305) Parts

This replacement screw secures appliance components and panels in their proper position. Replacing worn, stripped, or missing hardware restores a tight fit, reduces vibration or rattles, and helps maintain safe, reliable operation per the manufacturer's design. What it does:

• Fastens panels, brackets, or assemblies where specified in the model's parts diagram
• Replaces missing, rusted, or stripped hardware
• Helps eliminate looseness, rattling, or vibration
• Restores secure alignment of mounted components

• 1 screw

• Disconnect power and shut off water/gas before servicing.
• Verify the exact location in your model's parts diagram and replace screws one at a time to maintain alignment.
• Use the correct driver/bit; start threads by hand to avoid cross-threading and do not overtighten.
• Inspect mating holes/clips for damage; repair or replace related hardware if threads are compromised.

This lamp housing secures and insulates the appliance light socket and bulb, keeping the light stable and protected. Replacing a damaged housing restores a safe, reliable mount so you can clearly see inside when the light is on.

• Supports and protects the light socket and bulb
• Mounts the light assembly to the interior panel or liner
• Helps shield nearby wiring from heat and vibration
• Common symptoms include a cracked/melted housing, loose bulb or socket, or intermittent/no interior light with a known-good bulb

• Disconnect power before servicing to avoid electrical shock
• Remove the lens/cover and bulb to access the housing
• Note wiring and orientation; transfer the socket and wiring from the old housing if applicable
• Secure the new housing without overtightening; test light operation before reassembling covers

Screw that secures appliance panels and components to restore proper fit and reduce movement. Use this direct-replacement fastener to swap out stripped, missing, or damaged screws that cause loose panels or rattling. What it does:

• Secures panels, trim, brackets, and internal components to maintain alignment and prevent vibration.
• Replaces stripped, corroded, bent, or missing screws that can cause rattling, gaps, or loose parts.
• Restores proper fit and function of assemblies when original fasteners fail.
• Small part — confirm size and thread match your appliance before ordering.

• Disconnect power (and water, if applicable) before starting any repair.
• Use the correct screwdriver or bit; avoid overtightening to prevent stripping or cracking.
• Replace all like fasteners in the same area if multiple are damaged to ensure even fit and alignment.

This inverter converts the refrigerator's incoming power and controls compressor speed so the cooling system runs efficiently. Replacing a failed inverter restores proper compressor operation and helps return normal cooling performance. What it does

• Converts incoming AC power to the DC signals the variable-speed compressor needs
• Regulates compressor speed for temperature control and energy-efficient operation
• Works with the fridge's main control systems to manage compressor operation

• Disconnect power to the appliance before beginning any service to avoid shock
• Handle the board by its edges and avoid touching components; observe ESD precautions
• Mount and connect using original-style fasteners and harness connectors; verify secure, corrosion-free connections
• Check compressor, main control board, and harness for related issues if symptoms persist after replacement.

A replacement mounting screw used to secure appliance panels and components. This OEM-style screw helps restore proper fit and reduces rattling or loose parts for a finished, secure assembly. What it does:

• Fastens control panels, brackets, or interior trim to the appliance frame
• Restores proper alignment when an original screw is missing or stripped
• Stops rattling or vibration caused by loose fasteners
• Matches OEM fit for reliable fastening when the correct screw is used

• Turn power off at the breaker before servicing electrical appliances
• Match screw length, head style and thread to the removed fastener before installation
• Use the correct screwdriver or bit to avoid cam-out or head damage
• Do not overtighten; snug until secure to avoid stripping threads or cracking components

The Lamp is an OEM part for Whirlpool microwaves. This lamp illuminates the interior of the microwave, allowing you to see the cooking process and monitor the condition of your food.

Causes of a bad lamp can include regular use leading to burnout, electrical issues causing the lamp to fail, or physical damage from impact or mishandling.

Symptoms of a bad lamp include:

• The microwave interior not lighting up when the door is opened or during cooking
• Flickering or dim lighting
• The lamp failing to turn on despite replacing the bulb

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement interlock spring that provides tension for the appliance door latch so the door closes and the interlock switch can engage for normal operation. Restores reliable door engagement and latch return in compatible Whirlpool appliances. What it does:

• Provides tension to the door latch/interlock assembly so the door stays securely closed during use.
• Ensures the latch returns to the closed position and allows the interlock switch to complete the appliance's safety circuit.
• Helps resolve symptoms such as a loose or non-returning latch, door that won't stay closed, or cycles that stop because the door won't engage.
• Works as a direct replacement for the listed interlock spring in compatible Whirlpool assemblies.

• Disconnect power to the appliance before servicing to avoid electric shock or injury.
• Basic hand tools are typically required; panels or the door may need partial disassembly—refer to the model's service guide.
• Inspect the latch, striker, and interlock switch for wear or damage and replace if needed; improper installation can prevent correct engagement.

This replacement door handle restores a secure grip and makes opening the appliance door easier and safer. It's a direct-fit style designed to match the original part's shape and function for a clean, factory look. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that affect door use
• Helps restore proper alignment and ergonomics when the original handle is damaged
• Reduces the risk of sharp edges or failure from a compromised handle

• Disconnect power to the appliance before starting any repair
• Typical installation requires removing a few screws or clips; keep fasteners for reassembly
• Use hand tools only and avoid overtightening screws to prevent stress cracks

This is a replacement screw used to secure appliance parts and panels. It restores proper fastening where the original screw is missing, stripped, or corroded. What it does:

• Secures panels, brackets, or components in place to maintain appliance alignment
• Replaces lost, damaged, or rusted fasteners for a reliable hold
• Helps prevent rattling or movement caused by a missing screw
• Works wherever the OEM screw specification and fit match

• One screw

• Use the matching screwdriver or driver bit; avoid overtightening to prevent stripping
• Disconnect power and follow appliance safety precautions before servicing

This Pan-Crisp is a replacement oven crisping tray that helps brown and crisp foods for better texture and finish. It restores the oven's ability to deliver even surface browning for items like pizzas, fries, and handhelds. What it does:

• Provides a flat, heat-conductive surface to promote browning and crisping of baked or roasted foods
• Helps improve finish and texture when original pan is warped, dented, or missing
• Reduces soggy bottoms by elevating food for better air circulation
• Compatible with convection and conventional bake modes where a crisping tray is specified

• 1 Pan-Crisp replacement tray

• Allow oven to fully cool and disconnect power before removing or installing the tray
• Slide into the oven rack supports; no tools required for typical tray exchange
• Inspect supports and mounting rails for damage before use; replace if unstable
• Clean per manufacturer recommendations; avoid abrasive cleaners that can damage the surface