Kenmore Dryer 796.91542110 (79691542110, 796 91542110) Parts

Used video and took apart dru, this was extremely helpful. I bypassed the belt and door switch. Tested gas valves (gas disconnected) with multimeter. Found that the igniter worked the first gas valve, but the second gas valve would not open and the igniter would stay on. Found a flow chart online that shows the flame detect turns on causing the gas to turn on and shuts off the igniter. I replaced it and tested again. Igniter turns on, shuts off, then power to the second gas valve turns... Read more

I spoke with the experts at parts pro and they suspected the main power board. I ordered the main power board along with the control panel. Since I was taking everything apart I decided to replace other components as well- thermostats, thermistor , sensor wire. When I was all done the old LG was back to working like new. Oh while I was at it I cleaned and vacuumed out the complete machine. Great factory parts, videos p, service and videos, the price of all the parts was less than a repair... Read more

Https://www.appliancefactoryparts.com/content/pdfs/125631-1.pdf has the details to disassemble the dryer to access the vent part that cost apx$28. 1.5 hrs and some patience along with a screw driver and players was alll it took to to remove the cover, control panel, front cover, drum, belt, gas line and manifold assembly, flame tube? And rear drum panel in order to replace worn part. Reassembled in 15minutes to clean and vacuumed dryer. Works great now. Read more

• Too hot
• Doesn't shut off
• Takes too long to dry

I replaced the dryer motor. I followed the repair video on the Appliance Parts Pro site, with a few modifications to the procedure. I loosened the control panel and flipped it forward to improve access to the wiring connectors. I also loosened the front panel and tipped it forward before disconnecting the door switch as there wasn't enough space to disconnect the switch otherwise. Removal of the blower assembly required the use of penetrating lubricant as the assembly was stuck on the motor... Read more

Chatted with 1 of your professionals and within a minute she had the part and it was on it's way. The job was VERY easy to fix and the part is working great! Read more

Contacted support and although my machine wasn't posted as compatible with the rack, support contacted their researchers and confirmed that it was the rack I needed. Read more

Stuck it on Read more

I ordered the natural gas conversion orifice with 2 day shipping, I also ordered for only maintenance reasons a new ignitor, as they are very common wear and tear item (like a spark plug on a gas engine or a glow plug on a diesel engine ). Both items came promptly and well protected . Easy install, only needed a Phillips screwdriver for entire repair. R&R top first, r&r front display panel,r&r door,r&r front panel,r&r drum (very easy), replaced ignitor and orifice. Total job took 30 min. I... Read more

Replaced the lamp cover inside dryer. That covers the light. Read more

Changed orifice Read more

Replaced roller. Read more

I noticed if I caught it early enough the light inside would be on. I googled it and found that it could be the door latch slipping and letting the door open, which would stop the dryer. I watched the video on Appliance Parts Pros and it was so simple. I ordered a new door latch and catch and fixed it in 2 minutes! Thank you so much! Read more

Replaced idler pulley, screw, and dryer belt after completely disassembling the dryer Read more

The lint trap guide cover was cracked on our LG dryer which sees pretty heavy use at our rental cabins. AppliancePartsPros.com got us the replacement part in about 48 hours. They didn't have the lowest price, but they made the best assurances of a quick delivery while not having to pay for expedited shipping. I had double-checked part numbers (and prices and shipping time estimates!) at a number of other sites. All listed the same part number but, with it in hand, I could see it wasn't exactly... Read more