Parts for Ge APCA12XYLWT1: Portable Air Conditioner Parts

This plastic locator pin secures small appliance components, keeping parts aligned and stable for reliable operation. It's a simple replacement to restore fit where a worn or broken pin allows movement. What it does:

• Positions and holds trim, brackets, or internal parts in place
• Prevents parts from shifting, rattling, or binding during use
• Restores proper alignment when a pin is cracked, broken, or missing
• Small, non-conductive design suitable for plastic-to-plastic or plastic-to-metal connections

• One replacement plastic pin

• Disconnect power before servicing any appliance
• Remove any trim or panels needed to access the damaged pin; keep fasteners organized
• Press or gently tap the pin into place; some installations may require a small screwdriver or pliers for removal/installation
• Inspect mating parts for damage and replace any broken clips or retainers to ensure a secure fit

This flexible exhaust hose vents hot air and moisture from a dryer to the outside, helping the appliance dry clothes efficiently and reducing excess humidity in the laundry area. Fits in-line between the dryer outlet and the wall vent. What it does:

• Channels hot air and moisture safely out of the dryer to an exterior vent
• Helps prevent poor drying and extended cycle times caused by restricted airflow
• Reduces humidity buildup in the laundry room that can lead to musty odors
• Keeps lint and debris moving toward the exterior vent when used with a proper lint trap

• One exhaust hose

• Disconnect the dryer from power (and gas supply, if applicable) before installing
• Ensure both dryer and wall vent openings are clean and free of lint before connecting
• Secure hose ends with appropriate clamps; avoid sharp bends or crushed sections that restrict airflow
• Confirm the hose vents to the outdoors per local codes; do not vent into an attic, garage, or crawlspace

This genuine connector secures and joins the appliance's wiring harness for a reliable electrical connection, helping restore proper electrical continuity and reduce intermittent power or control failures. What it does:

• Provides a stable electrical connection between wiring circuits in the appliance
• Helps prevent intermittent power, control failures, or loss of function caused by loose or damaged terminals
• Allows safe routing and retention of harness wires at the service point
• Replaces worn, corroded, or damaged connector terminals that can cause arcing or poor contact

• Disconnect power (unplug or switch off breaker) before servicing electrical components
• Use proper crimping tools or terminal drivers when securing wires to avoid loose connections

This main window panel for single-hose portable air conditioners creates a secure, finished opening for the exhaust hose so the unit can vent properly and reduce drafts. It replaces a damaged or missing panel to restore proper airflow and fit. What it does:

• Provides a sealed, stable mounting surface for the AC exhaust hose to pass through a window opening
• Reduces outside air infiltration and helps prevent hose separation or sagging
• Restores proper venting when a cracked, warped, or broken window panel causes poor cooling or hot air recirculation
• Helps limit dust and pests from entering through the window gap around the hose

• One main window panel (single-hose) as pictured

• Disconnect and move the portable AC away from the window before starting; follow safety guidance in the appliance manual
• Insert and secure the panel in the window per the unit's instructions, then attach the exhaust hose to the panel flange
• Use appropriate fasteners or weatherstripping where recommended; avoid forcing or over-tightening plastic tabs
• Keep hands clear of pinch points and test the hose connection for a snug, vibration-free fit before returning the unit to operation

This drain tube directs defrost and condensation water from the freezer/fridge evaporator to the sump or drain pan, helping prevent water pooling and leaks. Replace a worn or cracked tube to restore normal water flow and reduce ice buildup. What it does:

• Channels defrost melt and condensation safely away from the evaporator area to the drain/sump
• Helps prevent water pooling under crispers or inside the fresh food section
• Reduces ice buildup caused by blocked or damaged drain paths
• Works with the fridge's drain system; requires clear drain inlet and outlet for proper operation

• Disconnect power to the appliance before starting any repair.
• Remove panels or shelving as needed to access the evaporator/drain area; catch any residual water.
• Inspect and clear the drain path and drain pan while replacing the tube.
• Secure tubing connections; replace if brittle, cracked, or flattened.

This universal lower-rack wheel replaces a broken or worn roller to restore smooth, stable movement of your dishwasher's lower rack. Designed to snap into the rack assembly for reliable rolling action and better loading. What it does:

• Replaces a damaged or missing lower-rack wheel so the rack rolls evenly and doesn't catch
• Helps prevent noisy, jerky rack movement and reduces strain on the rack track
• Restores proper alignment so dishes load and unload without tipping
• Fits common GE-style lower rack assemblies using the same mount style as the original

• Designed for simple replacement; wheel snaps into the rack support—check for retaining clips or screws on some rack styles
• Disconnect power to the dishwasher before performing any service
• Inspect the rack axle/clip and track for damage; replace any broken hardware to ensure proper function