Don L February 20, 2017 for Model Number Bosch SHX68T55UC/07; Serial FD950801769 At the completion of its cycle, I found the upper spray arm and its attachment hub had become unattached and were in the bottom of our machine. I can reattach the spray arm to the water supply tube using the original attachment hub but don't know whether it became detached from age, water temperature, etc. Any suggestions ??? Should I replace the attachment hub and/or the entire spray arm ??
1 Answer Don, It would be recommended to replace the spray arm and tube assembly as this most likely came apart due to a part wearing out. Read More...
Igor January 20, 2017 for Model Number SHE6APO2UC/06 I am having Bosch Dishwasher and looks like a vertical part on the middle of the back ( Water Feed Tube ) came out of the wall and it's loose now Part originally was welded ( small spot on the wall ). How can I fix it again? I am not sure if I can use any kind of glue inside my dishwasher. How water & temp. Thank you for our help!
1 Answer Igor, If the clip that holds the manifold to the wall has broken off you could try to use JB weld or something to try to hold it in place. Read More...
Jlindy November 06, 2016 for Model Number Bosch Evolution 300 Series SHE43M0 Top rack isn't getting cleaned, had it for 6 years with daily use. Can open mid-cycle and see top arm spinning and some water coming out. Dishes still very hot at end of run, so heater works. Have removed top arm and no (obvious) clogs, etc. Seems like top water is under lower pressure than it used to be or....? What do I take apart first/check for to ID problem. Thanks, J
1 Answer JLindy, You will want to check the filter to make sure that it is not clogged. If it checks ok then you will want to check in the pump assembly to make sure that there is no clogging or damage to the impeller of the unit. Read More...
Miriam October 17, 2016 for Model Number SHX55RL5UC/64 I need the upper spray arm for this machine. Can you send me a link or item number. I see one in your web site, but am not sure if it's good for my model number. THANKS
1 Answer Miriam, For the model number you supplied [SHX55RL5UC/64] the correct upper spray arm assembly is 00676933 / 00676933 Spray Arm, If you should want or need the Tall Item Spray Head it is part number 00167301 / 00167301. Both parts are in stock and available at this time. Thanks, Read More...
Amber September 04, 2016 for Model Number Svh4303uc / u11 The upper or central spray arm fell off (plastic clip on arm broke) I need to replace it correct? Do you know what part number to order? Thanks.
1 Answer Amber, The spray arm would need to be replaced which would be part number 00359976. Read More...
Brian July 23, 2016 for Model Number She47c05uc/43 Hi I have a Bosch dishwasher # SHE47C05UC/43. Upper arm came off. I would like to replace upper and lower sorry arms..should I replace the feed tube as well? What part numbers please?
1 Answer Brian, The lower spray arm for your unit is 00359975 and the upper spray arm is 00359976. You would need to replace the feed tube for the upper spray arm but not the one at the back of the unit. Read More...
Ryan June 10, 2016 for Model Number Bosch Ascenta model (2016) Hello. This morning, I noticed that the Dishwasher Water Feed Tube is loose. When I opened the door and pulled out the top rack, the top rack stuck to the feed tube. I believe this "sticking" is normal because there are three holes in the front of the feed tube that the top rack connect to when the top rack is pushed back into the dishwasher. But this morning was the first time I noticed the feed tube being loose. I have not really given it a good visual inspection yet, but can anyone let me know if this is an easy fix (e.g., just a matter of snapping the feed tube back in place)? Thank you!
1 Answer Hello Ryan. There should be clips the feed tube snaps into. You will need to snap it back into place. Read More...
Wayne W May 22, 2016 for Model Number SHU 5304 UC/06 I have a Bosch dishwasher model SHU 5304 UC/06 and I have no idea which partnumber I have to use to replace the center spray arm.
1 Answer Wayne, The part number for the center spray arm on your unit would be 00359976. Read More...
Sherflou March 16, 2016 for Model Number SHX46A05 UC/14 (FD 8211-) The upper spray arm doesn't spin, and the nozzles seem to be damaged, so I believe I need to replace it. BUT, the lower arm doesn't want to spin either. When I try to spin it manually, it appears to "drag" every half turn, but if I lift it a bit, it will turn all the way around with no high spots. Is this nornal? Does the lower arm lift itself with water pressure?
1 Answer Sherflou, The lower spray arm will lift some with pressure but if it is not spinning then it would be recommended to check the impeller to make sure that it is not damaged and make sure that there is nothing clogged in it. Read More...
Jonny November 29, 2015 for Model Number BOSCH SHX4AP05UC/06 I pulled off the upper spray arm to clean it. However, I only pulled off the actual blade - the piece that is attached to the bottom of the upper rack. Now it seems to be impossible to push back into place. Do I need to buy an entire upper spray arm replacement? All the 'how to' videos are for the entire assembly. Am I being dumb here?! thanks J
1 Answer Jonny, Unfortunately the entire upper spray arm will need to be replaced on your unit since just the arm came off. The part number for the center spray arm is 00359976. Read More...