Tom November 30, 2017 for Model Number Bosch WFMC3301UC/03 Bosch washer dispense cold water in trickles. Cold water inlet screen is unobstructed. I assumed the problem is the cold water inlet valve. OEM cold water inlet valve has this code E-06 5070000240 255474. What is the replacement part for this item?What other part do I need to check & replace?
Vinit September 03, 2016 for Model Number WFR2460UC/04 I need a dual cold water inlet valve for my Bosch washer WFR2460UC/04. The one you show available is for WFR2460UC/01. By appearance it looks just like the part I need. Can you confirm this part will work for my washer?
Marilyn November 11, 2015 for Model Number Bosch Washer WFMC5301UC/13 FD8805 90443 E-08 5070000240 255474 This part was leaking and I found a similar part on the site, however it looks reversed so I don't know if it's the correct part or not. It had been leaking for awhile and I didn't know it and it has also corroded the motor, so do you have a part number for that motor also? Or any idea how to clean off the corrosion? It still works right now. Thanks for your help!
1 Answer Hello Marilyn. 00422244 and 00422245 are the valves on the unit. As for the motor, it should be fine as long as it is working. Read More...
Matt July 15, 2015 for Model Number WFMC3200UC-01 Bosch Washer I have the part in hand (Valve, Part Number:AP3853434), but need advice on how to install it as the plastic mounting flange looks like it will snap off if not treated with kid gloves. Can you please help?
1 Answer Hello Matt. You will remove the screw securing the valve and then lift the old one out of the cabinet and slide the lip onto the cabinet of the new one. There is a grove the metal panel slides into on the valve. These are not hard to replace. Remove the top panel and turn off power and water before replacing. Read More...
Iwona July 11, 2015 I have a Bosch Nexxt Washer (bought in 2004 or 2005) that frequently fills the drum with water following the wash. So it washes and spins but once left for a bit you return to water pooling within the drum. It does not happen every wash. Water pump was replaced as we thought it did not pump all of the water out but problem remains. It was suggested to us that it may be a hot water valve that sometimes does not shut properly. Any suggestions??? Thanks Iwona
1 Answer Hello Iwona. You will need to check and see which valve is leaking and replace the bad valve on the unit. Read More...
Sil February 17, 2015 for Model Number WAE/20261/au/01 Hi. just double checking this is the right inlet valve for this machine: part nr 00428210? and if yes, do you ship to New Zealand. Any idea on freight? Cheers
1 Answer Sil, Yes this valve 10031360 is the correct part for your unit. Unfortunately we do not ship outside of the United States. If you know someone in the U. S. that could receive the part then ship to you would be the only way around that. Read More...
Virginia January 22, 2015 for Model Number WFMC3301C Hi.... just double checking ...... Matt asked exactly the same question and gave the same details as my Bosch, the answer u gave was 00422244 (cold) but at the top I notice you have put Bosch part # AP 385 3434 ..... is the part I order 00422244? cos I need to do some washing! lol!
Thomas December 22, 2014 for Model Number WFMC3301UC/04 FD8703 The water value is leaking and when I looked at it, the value appeared to be a single unit for the hot and cold water. When I put in the model number it does not recognize the number. It is a BOSCH Nexxt 500 series washer that I purchased in 2008. What is the part number for the water value that I need. It appears that this is a common problem from the questions that I have seen.
1 Answer Hello Thomas. 00422244 is the cold water valve and 00422245 is the hot water valve. They are not made together. Read More...
Matt December 14, 2014 for Model Number WFMC3301UC I have a leaky cold water valve. I wanted to double check the part number to make I ordered the correct one. I took down the numbers that were printed on the actual part. There are 3 numbers, the first is E-07 the second is 5070000240, and the third is 255474. Any help would be appreciated. Thank you.
Jeana May 26, 2014 Will this work in the Besch Nexxt 100 Series Washer? I have identified that this is the part I need.
1 Answer Jeana, the valve 10031360 is used on Bosch washers. However, to guarantee it will work on your appliance we will need your model number. Please obtain this information and repost for further assistance. Thanks! Read More...