Frederick February 06, 2024 for Model Number LFSS2612TE4 Do you have to turn off the water to replace this part? I bought this refrigerator about 18 months ago. The first time I replaced the water filter, it released properly. I tried replacing last week and the filter would not release.
1 Answer Frederick, the water supply would need to be turned off during the replacement process. Read More...
Craig February 10, 2022 for Model Number 253.70313211 My Kenmore refrigerator which is a double door fridge w/freezer on the bottom that has water & ice in the door, stopped dispensing water and making ice. I had water to the inlet side of the water filter when requested but none at the door. I replaced the water filter base and installed a new filter. Still no water at the dispenser. Any ideas?
1 Answer Craig, based on the information provided, the failure would be at the water valve 242253002. Read More...
Ron Dunsmore December 31, 2021 for Model Number FPHS2699PF4A My model number is FPHS2699PF4A I need to order a water filter base. Could you please tell me the number of the base I need to order.
Ernie N. November 20, 2021 for Model Number FSHS2611LW4 Is this the correct Water Filter Base for my refrigerator?
1 Answer Hello Ernie, If your model number is actually FFHS2611LW4, you will need to order 242252702. Read More...
Eva December 16, 2020 for Model Number Frigidaire model FPHS2399PF4 Hello, thank you for the answer but the question is how do we remove the sleeve that holds the filter - need to remove that to get to the seat for the filter - there are no visible screws as they are in models that have non LED lighting. Thank you and best regards Eva
1 Answer Eva, There appears to be a screw at the back side of the filter cover that holds a small cover in place. Remove that screw and cover and then you should be able to remove the filter cover. Read More...
Eva December 16, 2020 for Model Number Frigidaire model FPHS2399PF4 we have the Frigidaire side by side with LED lights and so the housing for the water filter base is covered different from the example given. How do we remove the cover to get to the water filter base - please HELP.
1 Answer Eva, Based on the information provided you would remove the filter and then remove the screws that hold the plastic filter housing and the base is under/behind the plastic cover. Read More...
Ben July 08, 2020 for Model Number FRIGIDAIRE REFRIGERATOR model FFHS2322MSGA Water dispenser dispensing very low flow water. I installed a new inlet valve and made sure that the water line in the freeze door is not frozen but no change. The water filter is new May2020, and the ice dispenser is working . I did an experiment : I swaped the brown and clear water lines connected to the inlet valve ( these lines are connected to the water filter; the brown one beeing the inlet and the clear one beieing the out let from the filter ) Surprisingly I had a normal pressure in my water dispenser !!! Can this be an explanation of a defective water filter base ?
1 Answer Ben, Yes, the filter base would be the most likely cause for the lower water pressure coming to the dispenser. Read More...
Meiilee June 22, 2020 for Model Number eibbab237@outlook.com My water filter is stuck in the filter housing in my refrigerator, how do I get it out? Model #FFHS2322MSO.
1 Answer Hello, Meiilee. You should be able to remove the filter by first pushing it in and then, by pulling it out. if it stuck, push and pull until it comes out. The filter base p/n AP6328949 may be damaged and you may need to replace it. Read More...
Geoffrey April 16, 2020 When getting water from door, no water will come out unless i remove filter and place back in. What is the fix to get this corrected? I bought a new filter, but did not work. Make a gurgling sound when trying to get water from door or when its filling the ice maker. Will a new filter base correct this?
1 Answer Geoffrey, based on the information provided it sounds like the filter base has failed as it is not activating the bypass plug properly when the filter is fully inserted and locked in. Read More...
Bill March 31, 2020 for Model Number FPHN2899LF7 How difficult a job is it to replace the water filter base for water filter Frigidaire ULTRAWF?
1 Answer Hello Bill, This is not too difficult. Simply remove the covers at the top of the unit and look for the screws that retain the housing. Remove the water tubes in the following manner: To remove: Push line in and hold the ring in, then, while holding the ring in, pull the line out. To re-install, push the line in until resistance is met. Push harder until the line "pops" in another 1/4 inch or so. Pull on line without touching the ring to seat seal. Reinstall the associated parts in the reverse order. Read More...