E. Cooney March 14, 2014 for Model Number Kenmore stove model # 790.95421302 Accidentally cracked the glass cooktop of this stove. Is it necessary to buy entire new stovetop unit, or can I just replace the glass? Everything else is working fine.
1 Answer E. Cooney, The main top of the unit would need to be replaced. The part number that you would need is 316251968. Read More...
Nery February 11, 2014 for Model Number model 79096014404 part 316224200 I have a kenmore glass cooktop. I didn't keep note of where each wire goes how can I know where each wire goes??
1 Answer Nery, Not sure of the exact color coding of the wires for your unit due to the manufacturer does not supply wiring information for us. You can look at the wiring diagram that you have and it will have the correct wire colors. It appears that there will be a gray wire that will go to 2b on the little box. There should be numbers on it. 2b will jump between each element. There will be a black wire that will connect to 1b. There should be either 2 brown or 2 orange. One of the wires will come off of the H2 on the burner switch and connect to 2a and the other will connect to the element. Read More...
Senaddor February 03, 2014 for Model Number 790.96122409 I have a Kenmore electric range 790.96122409. The left front burner stays on even when turned off. It takes a long time and is unpredictable when it turns itself off. Also when initially turning the element on it goes to HI setting immediately. Can you help me troubleshoot which part most likely needs replacement? Thank you in advance.
1 Answer Hello Senaddor. Based on the information you provided, the switch 316436001 is bad and will need to be replaced on the unit. Read More...
Marty January 23, 2014 for Model Number 790.9623 The large left front burner has a simmer select control. It heats but the main burner does not. It appears the ceramic temperature protection control may be defective. I have replaced the infinite switch with no improvement. WILL PART # 316135401 replace the current burner assy. and does it sound like this is the problem?
1 Answer Hello Marty, As per our research, the 9" element for model number 790.96233400 is part number 316135401. Read More...
Michael January 15, 2014 for Model Number 316455400 Where the wires go to in order for a kenmore clock?
1 Answer Hello Michael. Sorry, we can not get that information from Kenmore. Check and see if you have a wiring diagram on the unit to use for the clock install. Read More...
Marek G. October 13, 2013 for Model Number FEF366DCD My 3 burners stopped working. How much is for whole set? Is the price listed for 1 or 4 of them?
1 Answer Marek, the manufacturer does not offer the burners are a kit or set on your model. The 6" element part number is 318178110 and the 8" element part number is 316135401. You'll need to order a QTY of 2 each. Thanks. Read More...
B.A. September 22, 2013 for Model Number FES367ASF I need to replace the heating element on the right front of my frigidaire glass cook top stove. Please advise what the model # is for the replacement part. Thank you.
B.A. September 22, 2013 for Model Number FES367ASF What is the model # for the right front element on a Frigidaire cooktop stove?
Sam September 11, 2013 for Model Number 790 95889300 I need to replace the heating elements on both burners on the left hand side of the glass cooktop. What parts do I need and how do I install them?
1 Answer Sam, the left rear element is part number 318178110 and the left front element is part number 316135401. Remove or turn off power to the unit. Remove or open the door. Remove the screws that hold the top to the trim plate. Lift up on the maintop and support the top. Remove screws and wiring, keeping note of where each wire is located at, to the burners. Reassemble in reverse order. Thank you. Read More...
Alan September 09, 2013 for Model Number FEFB66ECF I have a Frigidaire electric glass top range. The left had large heating element went out. The part number was 316224201 has changed to 316135401. There are 4 wires that run to the burner. There are 2 black wires and 1 gray that are attached in one area. Then there is a orange wire that is attached on the side. The new part does not have a place to attach the orange wire. I need help. How do I attach the wires?
1 Answer Alan, There are numbers on the back of the element. There will be a black that connects to 2a, and one to 1b. The grey will connect to 2b and the orange will connect to the element. Read More...