Chris April 25, 2015 for Model Number Kemnore 790.9611 My heating element works fine (tested), but the end of the orange wire that connects to the element (not the switch) burned pretty cripsy due to a poor contact. Do you sell a kit to replace the end of the connector wire? I think I can clean up and salvage the contact on the burner itself
1 Answer Chris, You can get the high temp connectors for the unit which would be part number TJMA02875-1. Cut the bad part off the wire, strip the insulation about 1/4" from the end and crimp on a connector. Read More...
Paramjit R. April 15, 2015 for Model Number CFEF366EMD I have Cooktop model number cfef366emd front right element not working so I want to replace. I need the part number, thanks.
Tim February 18, 2015 for Model Number 790.96213409 I have replaced both the front left element and switch. Element still does not work. Tested all parts both old and new and they are good. Any ideas what to do next?
1 Answer Tim, With the unit having a new element and switch, you will want to check the wiring between the 2 components to make sure that the wiring is good. Read More...
Tina February 17, 2015 for Model Number FEF368GCD I replaced the burner in my stove because it was not coming on. The replacement part was 316135401. The new part is not the same configuration as the old part. The old part had a small and large connector on one side and the same on the other side. The new unit has two large connector on one side and one large and one small connector on the other. The wires do not fit all the connectors. How do you connect the wires. I have two big wires that are orange. Two small wires - one wire is double wired that is gray and the other is black.
1 Answer Tina, Alan, There are numbers on the back of the element. There will be a black that connects to 2a, and one to 1b. The grey will connect to 2b and the orange will connect to the element. Read More...
Neal January 13, 2015 for Model Number 790.95314303 What is the part number for the right front burner element on this model? Thanks.
Bill H. January 02, 2015 for Model Number 79096219408 My right dual burner on my glasstop stove does not work on single burner. I need the part number and is it expensive to purchase the replacement part?
1 Answer Bill, the right front dual element is part number 316555800. You may click on the part number given to view the parts information and pricing on our site. Thanks. Read More...
Toby November 25, 2014 Model number worn, frigadaire stove, right front radiant burner with thermal limiter. 4 wires 1 black 1 white 2 brown. Where on replacement burner do each connect?
1 Answer Hello Toby. Sorry, without the model number, we can not answer a wiring question. We need the model to locate the wiring diagram if it is available. Read More...
Gerardo July 23, 2014 for Model Number FEF336ECD Ordered a large burner element replacement for FRIGIDAIRE Model # FEF336ECD. Part number AP4416812 was suggested. The problem is that the prongs and the connectors are different than the ones on the old element. Is it possible that this is the wrong replacement part?
1 Answer Gerardo, This burner element 316135401 is showing to be the larger of the elements and should connect the same as the original. The only difference may be that there was a wire from the terminal on the old one that went to the box that they eliminated. Read More...
Hector B. March 28, 2014 for Model Number frigidare es100controlwith ceramiccooktop range I want to know if this elements on the range works like go on and off every second or like intermittently.
1 Answer Hello Hector, The elements are designed to cycle on and off as a means to control the temperature. With nothing on the element, it will cycle on and off rather quickly. Read More...