Customer Questions and Answers for Door Handle by Frigidaire

Barbara, If the unit has stainless handles that are tubular then there will be a set screw at the top and bottom you can tighten. If it is a plastic handle then you would lift straight up on the handle to release it and then can tighten the screws.

Hello John. These are 3/32" allen screws.

Hello Mallisa. You will grasp the handles and slide them off the hook screws. Then tighten the screws down and slide the handles back onto the door.

Hello Bob. Sorry, the only way to remove it is to lift up. You will need to keep trying to see if you can get it to pop loose.

Hello Brandon. 241930103 is the handle. If you need both you will need to order 2.

Carol, If you lift straight up on the door handle it will come off in order to tighten the screws, then slide it back on.

Hello Sandra, If you grasp the door handle and yank it straight up, it will pop off of its' retaining screws. If these screws are loose they will need to be tightened. If none of the screws are loose and the screws inside the handles hole in the keyhole retainers are tight, you may need to remove these metal parts inside the handle and manipulate them a bit to tighten the keyhole retainer. If you cannot get them to tighten up without causing them not to grab back in, you may have to replace the handles. Also be very aware that the screws in the handles are threaded into plastic so be careful not to strip them.

Hello Sandra. Jerk upward to remove the handle from the door. Then tighten the stud down. Then reinstall the handle.

Hello Sandra. Place the handle on the studs on the door and pull down to lock into place on the unit.

Hello Wendy! For the model number supplied you will want to order handle part number 241930101. The black handle is a different design and will not fit this unit. Thanks!