Roy Settle May 06, 2021 for Model Number FGGF3054MFG Can I just get a new igniter rather than the whole oriface and igniter?
1 Answer Roy S, Based on the model number provided the manufacturer does not offer the ignitor as a separate part for this model, It does come with the ignitor/orifice assembly. Read More...
Duane August 30, 2019 for Model Number fggf3054kfb replaced safety valve to repair gas leak but now oven has large flames coming out of slots does safety valve have different orifices for lp or propane and if so what orifice would a new valve come with i did purchase new valve frrom you folks thank you
1 Answer Hello Duane, the safety valve comes with the natural gas bake burner orifice already installed, if your stove has been converted to LP gas, just remove the LP bake orifice from the old valve and install it on the new valve, if the old valve has been discarded then you will need to order the LP conversion kit, part GRLP3 Read More...
Rb May 17, 2018 for Model Number FGGF3054KFB I have this model ( Frigidaire Gallery) stove. Several months ago the front right burner ( labeled as "Quick Boil" ) stopped functioning properly. It will ignite but the flame is not adjustable with the knob. Do I need to replace the ignitor /orifice assembly to fix it? Thanks!
1 Answer RB, This issue would most likely be caused by a faulty burner valve which is part number 5303935233. Read More...
Dominick March 18, 2018 for Model Number lggf3042kfn the spark electrode does not spark can i just get the peace thats makes it spark
1 Answer Hello Dominick, unfortunately the manufacturer does not offer the electrode separate from the igniter/orifice assembly. You'll have to order the correct assembly for the side needed, thanks! Read More...
Kathy March 15, 2018 for Model Number LGGF305MKFH My electronic ignition works intermittently. Do I need to replace the whole assembly or can I just purchase a new igniter? Thanks
1 Answer Hello Kathy, If this is the surface that is giving an issue you could have a start switch harness 316580614 issue or a failed spark module 5304508269. Read More...
1 Answer Hello John. Unfortunately, we are unable to ship outside of the US or Puerto Rico at this time. We will need a US physical address to ship parts to. Read More...
Terry January 04, 2017 for Model Number LGGF3043KPG MY question is we have a Frigidare gas oven and it does not seem to heat up to the temp that is needed, I replaced the gas regulator on propane tank outside and it helped for one time we used the oven and then it stopped and did the same thing like not heating up to 400 like wife wanted for cooking now is there anything that would cause this to happen , like the thermostat or switch? Or would it be the control valve in the bottom of the oven it self? Stumped
1 Answer Terry, You will want to check to see if the igniter is glowing. If it is then test the oven valve for 3.2 to 3.6 vac to it. If there is then the valve will be the issue. If not then igniter will be the issue. Also check the oven sensor to make sure that it has 1090 ohms of resistance at 77 degrees. Read More...