Customer Questions and Answers for Panel, Glass , Inner Oven Door by Frigidaire

Joann, Unfortunately, there would not be stainless steel parts available for this oven.

Spiro, The part number for the inner oven door glass will be 318041603. To replace the glass you will need to remove the door from the unit and then you would want to disassemble the door. Take photos as you take it apart so that you can see how it comes apart and take photos of each part of disassembly.

Spiro, The part number for the inner oven door glass will be 318041603. To replace the glass you will need to remove the door from the unit and then you would want to disassemble the door. Take photos as you take it apart so that you can see how it comes apart and take photos of each part of disassembly.

Spiro, The part number for the inner oven door glass will be 318041603. To replace the glass you will need to remove the door from the unit and then you would want to disassemble the door. Take photos as you take it apart so that you can see how it comes apart and take photos of each part of disassembly.

Hello Annan. The outer glass, 318196908, is discontinued. You will need to order 3 of the inner glasses. 318041603. Thanks.

Hello Bridget. When you install the door hinge back into the receiver, and then open the door all the way open, you should be able to unlock the hinge.

Hello Frank, You will need to order part 318041603 for the recommended glass for the model number you posted.

Hello D. This shouldn't be too difficult. You should be aware that the power needs to be turned off to the unit before starting. In this configuration, it is very easy to hit a hot wire on ground in this process. The screws should be lined up across the bottom of the control panel and the door will have to be opened to access them. They screw in straight up. There may be a couple of screws on each end and the control panel sometimes just hooks into position, depending on the configuration. The manufacturer does not offer specific instructions for this model number.

Eliza, the main top listed for the given model is part number 903040-9010. Unfortunately, this item has been discontinued with no further replacements or cross references available and our company is unaware of any other available sources. Sorry about that!

Lulu, you'll need to remove the door and disassemble it to access the inner glass panels. You can use glass cleaner or warm water and soap to clean the glass. you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If your door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door assembly. Once you have cleaned the door glass, you will reinstall the oven door back onto the range in reverse order of the way you removed it. Hope this helps you, thanks.