Kyle I August 03, 2017 for Model Number Frigidaire Professional FPHD2491KFO The Start/Cancel button is the only button not working on the console assembly of the dishwasher. Would that most likely be the console assembly or the PC board? Every other button is working as it should. Thanks
1 Answer Kyle, It would be recommended to test the door switches to make sure that they are good and if they check ok then this will most likely be the control panel that is faulty. Read More...
Steve July 01, 2017 for Model Number FPHD2491KFO Machine will not start, the type of wash and time shows but the close door light never comes on so machine will not start up .
1 Answer Steve, You will want to check the door switches on the unit as this sounds like it would be caused by faulty door switches not making contact. Read More...
Amy November 28, 2016 for Model Number FPHD2491KF0 Our dishwasher runs, but you cannot select any cycles, just turn it on. At first, it would sometimes not respond when you were pushing the buttons to change dry temp or something, now it will only respond to start. Is this an issue with the mother board or control panel?
Len Z November 12, 2016 for Model Number FPHD2491KF0 On the keypad sometimes no button will light up. Other times you cant control what wash cycle you want. Sometime the Normal Wash cycle will light up other times the Power Plus and Sanitize will light up. It like it has a mind of its own. Could the mother board need replaced. If so what is the part number I need for this model. Thank you.
1 Answer Len, This issue would be more likely an issue with the control panel of the unit being defective which is part number 5304475578. Read More...
Steve May 09, 2016 for Model Number FPHD2491KF0 No error codes, water pumps in and drains only during the cycle. I thought it could be the circulation pump, but replacing it didnt help. Could I have a faulty control board?
1 Answer Hello Steve. It sounds like the board or the harness is bad and will need to be replaced on the unit. Read More...
Mike D March 26, 2016 for Model Number FPHD2491KF0 My dishwasher completes the wash cycle, but does not drain at the end of the cycle. If I hold the cancel button and close the door, the water drains fine. I replaced the drain hose and made sure there are no obstructions. I also checked that the drain pump works fine with no broken impellers. Is there some type of sensor for water level? Could this be the control board?
1 Answer Mike, If the unit drains when you hold the cancel button then the issue with the unit will be a faulty control board 5304475569. Read More...
Saw244 January 31, 2016 for Model Number FPHD2491KF0 My Fridigaire Pro. dishwasher stopped working, there was an error code LO we added rinse aid and the error code went away but now nothing seems to work, no lights come on and it seems like the dishwasher is dead, but I know there is power going to it. Could I need a new control board??. thank you in advance for your feed back.
1 Answer Saw244, Yes the LO just meant that rinse aid was low. For the issue of having no power at all to the unit you will want to access the door switches and make sure that the switches are good. If the switches check good for continuity with the buttons pushed in then check on the control board on the 7 pin connector which is P3 and test from black to white to make sure that there is 120 vac there. If there is then the issue will most likely be a faulty control board. Read More...
Pat July 16, 2015 for Model Number FPHD2491KF0 Our dishwasher stopped working and we had the error code "Er", I replaced both the door latch and circuit board with no help. Any other suggestions before I purchase a new dishwasher? The furstratrating part of all this is Frigidaire has been no help when I called the customer service.
1 Answer Hello Pat. It sounds like the console 5304475578 will need to be replaced on the unit. Read More...
Pat July 08, 2015 for Model Number FPHD2491KF0 Tried to start dishwasher several times with no success, finally got all lights on control panel blinking with the Code "Er". Reset house c/b no help, is this a control panel issue or something deeper?
1 Answer Hello Pat. ER is a code for a bad door switch. You will need to test the door switches on the unit. Read More...
Gary October 30, 2014 for Model Number FPHD2491KF0 Replaced circulation pump still will not run do I need to replace pc board? Water will fill and will pump out but no wash or rinse cycles display works and you can cancel cycles.
1 Answer Gary, With the recirculation pump having already been replaced then the issue would be with either the wiring between the pump and control board or the control board being faulty. Read More...