Sonia April 23, 2011 for Model Number 417 44052401 My washer keeps geting error code 43. Don't rinse and spin in the last cycle. Thank you!!!!!!!!!
1 Answer Hello Sonia. The 43 code is for a long drain. You will need to check the pump filter, located inside the tub to pump hose, and see if it is clogged. Also, check the pump and drain hose and make sure they are not clogged. If all is clear, you may need to replace the drain pump, if it is getting power to it. Hope this helps. Read More...
Katie April 23, 2011 for Model Number 417 44052401 My washer keeps geting error code 23. My washer will not rinse and dont spin in the last cycle. Thank you!!!!!!
1 Answer Hello Katie. You will need to check the pump filter, located inside the tub to pump hose, and see if it is clogged. Also, check the pump and drain hose and make sure they are not clogged. If all is clear, you may need to replace the drain pump. Hope this helps. Read More...
Donald April 22, 2011 for Model Number atf 6000es1 My washer will drain most of the water but will not spin. I checked the drain hose and its not plugged. I also checked the drain pump and drain tub and it is free of any debris. Tried different spin settings and no change. The timer shows seven minutes and the tub does its final tumble and the machine beeps and shuts off.
1 Answer Hello Donald. Did you check the filter located inside the tub to pump hose? If not, you will need to check this and see if it is clogged. If so, this can cause the problems your having. The filter is number 40 in the diagram. Hope this helps. http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5156096&diagram_id=1260967 Read More...
Bill R. April 20, 2011 for Model Number FEZ831AS! I could not find the washer Md.# but this is the Dryers MD.#. The water does not pump out first before it spins. It spins and pumps at the same time causing the washer to leak on the floor.
1 Answer Hello Bill. You will need to check and see if the pump is clogged or the drain hose. If it is not pumping out fast enough, it will cause the water to spill over. Hope this helps. Read More...
Deborah W. April 12, 2011 for Model Number ATFB6000ES In reference to previous question I asked, where is the pump located and how do you check it for being clogged? Thank you, Debbie W.
1 Answer Hello Deborah. It is located inside the machine on the bottom panel. You will need to remove the back access panel to access the pump. Here is a link to the diagram page to see where it is located. You will want to check the filter located inside part number 41 on the diagram. Hope this helps. http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5155574&diagram_id=1259382 Read More...
Deborah W. April 12, 2011 for Model Number ATFB6000ES The washer will not spin. It washes the clothes but will not spin completely out. Tried to just use spin cycle and it turns on but the tub will not move. Thanks for your help. Debbie W.
1 Answer Hello Deborah. Does it pump the water out? If not, you will need to check and see if the pump is clogged. If it is clogged, it will prevent the machine from spinning. Hope this helps. Read More...
Audrey G April 10, 2011 for Model Number GLWS1339CS1 My washer will not drain the water, is there a filter that I might be able to clean out?
1 Answer Hello Audrey! Check the drain hoses to make sure that they are not clogged. Make sure that nothing has got stuck in the drain pump. If all is clear, you will need to replace the drain pump assembly 137221600. Hope this helps! Read More...
James B March 10, 2011 for Model Number ltf6000eso My washer keeps geting error code 24. Is threre a strainer fliter in the drain pump that could be cloged? Drain hose is above 24" also it seems that cycle timer is not timing properly when it has a problem draining. Thanks
1 Answer Hello James. Yes there is a fliter in the pump. Here is a link to the parts diagram and the filter is #40 on it. Hope this helps. http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5155573&diagram_id=1259362#d1259362 Read More...