Aimee January 01, 2012 for Model Number tdb210rfs5 My dishwasher no longer cleans the dishes. The water goes in and pumps out. The problem seems to be with the spray arm. When the dishwasher is opened, sometimes the spray arm is leaning to one side. Now it will not snap back on at all. It looks like the part the spray arm snaps onto is broken off. What do I need to replace? My dishwasher also makes a horribly loud noise. What might make it do that? Thank you!!!
1 Answer Hello Aimee. Based on the information you provided, you will need to replace the motor 154859201 and the lower spray arm assembly 5304518927. Hope this helps. Read More...
Gina July 23, 2011 for Model Number Kenmore 587 The spray tower does not seem to be rising. As a result while the dishwasher goes thru the full cycle the dishes are dirty. It I replace the spray tower will it solve the problem?
1 Answer Hello Gina. If the lower spray arm 5304518927 is broke, you will need to replace it. You will need to remove the filter assembly and check and make sure the impeller assembly 154859201 is good on the dishwasher. Also check and make sure the unit is filling with water correctly. If not, the spray tower will not rise and wash the dishes properly. You will need to replace the water valve 154637401 if the unit is not filling all the way up. Hope this helps. Read More...
Jack N. May 21, 2011 for Model Number FDB130RGS3 The largest end of the lower spray arm has broken. I don't see a nut at the base. How do I replace the lower spray arm?
1 Answer Hello Jack! This spray arm snaps in and should be removable by simply pulling upward at an angle or popping the tabs with a small screwdriver. I hope this helps! Read More...
Gale Y. May 05, 2011 for Model Number FDB125RHBO The spray arm on the bottom of the Frigidaire Dishwasher tub came off. How do I put it back on?
1 Answer Hello Gale. The lower sprayarm 5304518927 snaps onto the nut assembly. If the tabs are broke, you will need to replace the lower sprayarm. Hope this helps. Read More...