Tonya July 20, 2013 for Model Number BAFW3574KW0 My washer is not allowing water to run in. Do I need to replace the inlet valve?
1 Answer Tonya, You will want to shut off water supply and pull the hoses from the inlet valve and check for clogging of the inlet screens. If clogged clean and retry. If still no water check to make sure that there is 120 vac to the valve and make sure that water supply is on and if there is power but no water then replace the valve 134371220. Read More...
Mike June 27, 2013 for Model Number Frigidaire front loading washer Upon replacing the water valve on the washing machine, it leaks where the valve connects into outlet ports on the back panel. The black gaskets shown in repair videos are missing on our model and do not come with the new part. How do I find this missing part?
1 Answer Mike, If you are referring to the rubber seals that are inside the hoses then these parts would not come with the water valve and we do not have these seals available as an individual part. Read More...
Buckwheat June 11, 2013 for Model Number Frigidare washer model GLTF2940FS 2 How do I take of the water valve with out taking of the stack dryer? Need to replace water valve. Thank you B
Rdavi May 28, 2013 for Model Number Frigidaire LTF6000FS0 My softener dispenser is not working. How do I test to see if the selonoid valve is working?
1 Answer Rdavi, You will want to check to make sure that the dispenser solenoid is getting power when calling for water to run in. Pull the dispenser assembly and check to make sure that there is not clogging in the ports for the dispenser. Read More...
Charles April 07, 2013 for Model Number Frididaire ATF600FS1 Hello, the front side washer I had started to develop a slow leak. I came into the laundry room in the morning to find the tub basin full of water and slowly dripping out into the floor thru the open door. Do I need to replace the valves or is it something else going wrong?
1 Answer Hello Charles. Based on the information you provided, it sounds like the valve is bad and will need to be replaced on the unit. Read More...
Keith B. March 07, 2013 for Model Number FWFB9200ESO I Have a frigidaire Water Valve part 134371220 or 134371210 The model FWFB9200ESO says the one part but the one in the machine has a small sensor on it and the valve I ordered does not. What are the differences between these 2 part numbers and do I need to switch parts I have the one with out the sensor on it?
1 Answer Keith, the valve used on your model with the sensor is part number 134371220 (134371220). Valve part number 134371210 (134371210) does not have a sensor. Thanks! Read More...
Mario February 23, 2013 for Model Number LTF2140ESO I have a front loader washer machine. I have check hoses and screens where the water go in and is clean but the water don't go in. Can you give idea to fix my problem? I think the valve is no good.
1 Answer Hello Mario, You will want to do a voltage test to make sure that there is power getting to the water valve. When you start unit up and it calls for water there should be 120vac to the water valve. If there is 120 vac then the water valve is faulty and will need to be replaced. Read More...
Jonathan February 02, 2013 for Model Number atf8000fe1 Having problems with softner dispensing, bleach and detergent works fine. I have checked tube going in tub and its fine not stopped up. Any ideas or what I need to check next?
1 Answer Hello Jonathan, You will want to check to make sure that the dispenser solenoid for the softner is getting power when filling for wash and for when it runs water for the bleach. If power then you would need to replace the solenoid 134371220. Read More...
1 Answer Hello Ed, You will want to turn water off and pull the hoses from unit and check to make sure that the screens are not plugged on the water valve. Read More...