Kskropinklub March 31, 2018 for Model Number Kenmore 81442 Will this universal 4 prong work on my Kenmore Dryer?
1 Answer Hello, this dryer power cord is designed to be used with multiple units. The only thing you have to make sure is that your receptacle on the wall is a 4 prong rather than a 3 prong. Thanks! Read More...
1 Answer Jake, Yes the dryer cord can be used on a range and will just need to determine if it is 3 or 4 prong cord. Read More...
Drd July 06, 2017 I have a GE dryer. The power cord has three connections that are attached to a component. The component is about 21/2 inches across with three connector wires. It attaches at the bottom of the dryer....attached to the dryer. What is that component called?
1 Answer Hello DRD. The part your referring to is called the terminal block on the unit. Thanks. Read More...
1 Answer Greg, The [AP5176321} 240 Volt, 30 amp, 60 Hz. Power cord will work on your machine. It's four(4) feet long which should be enough to operate and install your dryer. Thanks, Read More...
Mike February 15, 2017 Bought new dryer, was going to use same power cord because it wasn't that old. The wires on the old dryer are different color. whats the difference? Old- blue, white black, New- red white black
1 Answer Hello Regina, You will need WX09X10002 if your wall outlet behind the dryer has three prongs and you will need 5304512982 if the wall outlet has four prongs. Read More...
Timothy November 08, 2015 for Model Number kenmore My apt does not have room for a washer and dryer. Can I put the dryer across the kitchen and use a 15ft dryer cord to connect? Or is it to dangerous. thanks T.
1 Answer Timothy, As long as the cord is approved cord for the use on the dryer then you would be able to do this. Read More...
Carolyn A September 29, 2014 I need a 6 ft electrical cord for my whirlpool dryer. It has a 3 prong. Please advise model# for ordering.
1 Answer Carolyn, The 6' 3 wire 3 prong power supply cord for unit would be part number WX09X10004. Read More...
1 Answer Hello Suzan! If your wall outlet has a 4 prong outlet you will need part number TJ1004. If it has a 3 prong outlet you will need to use cord part number WX09X10002. Thanks! Read More...
Jackie July 21, 2014 for Model Number web5200vq1 The power cord for the dryer is a 4 prong and the wall outlet is a 3 prong. Please tell what steps I must take in changing the 4 prong power cord to a 3 prong because I live in an apartment complex. I need to know if I would be able to use my dryer and not cause any harm to others. I thank you in advance.
1 Answer Jackie, To change the dryer cord you will access the terminal block. There will be a grounding strap on the center terminal that will connect from the center terminal to where the ground wire on the 4 wire cord is connected. The center wire of the 3 prong wire will go to the center post and the other 2 on the outer posts. Read More...