Lee July 19, 2023 for Model Number JB400DP3WW I am getting an F4 error code I have checked everything that I know to check and it all looks good. How can I test the board and the sensor to see which part I will need to replace?
1 Answer Lee, the oven sensor would need to be tested for resistance and it should measure about 1100 Ohms at room temperature. If the sensor tests good, the oven control would be the cause of failure. Read More...
Mike July 19, 2023 for Model Number JB400DP3WW I am getting an F4 error code I have checked everything that I know to check and it all looks good. How can I test the board and the sensor to see which part I will need to replace?
1 Answer Mike, the two white wires at the left wire connection would need to be tested for resistance. If there is around 1100 Ohms, the control WB27X45466 has failed and would need to be replaced. If there is no resistance, the oven sensor WB21X22134 would need to be tested directly to identify if it has failed or if there is a wire failure. If the sensor does not read around 1100 Ohms directly, it has failed and would need to be replaced. Read More...
Lee July 19, 2023 for Model Number JB400DP2BB Which two relays do I check to see if the bake element is the reason that it will not come on or if the board is the issue? What is the reading that I will need to look for?
1 Answer Lee, the control WB27X45466 would be tested for 240VAC from the yellow wire to the orange wire of the relay blocks when the appliance is set to bake. If there is not 240VAC, the control has failed. Read More...
1 Answer Shannon, the oven control WB27X45466 would be used with the model number provided. Read More...
Samuel June 14, 2023 for Model Number JSS28DN3WW Had a F2 error but the sensor tested to be good. I reset but still getting code. Would it be the oven control I need?
1 Answer Samuel, If the sensor and the harness of the sensor are good then replace the control board. Read More...
Mitchell June 14, 2023 for Model Number JDS28CK3CC No lights on control board but buttons work, How do I fix the light in it?
Ben June 07, 2023 for Model Number PS905DP2BB Hi - our display went out on our GE oven and none of the buttons respond to touch. We have reset the breaker and unplugged the unit with no change. I am assuming we need a new circuit/control board and are hoping you can provide a part number and supply the part? Thank you!!
1 Answer Ben, If there is correct voltage to the unit and the control is dead then it would need to be replaced. WB27X45466 Read More...
Dorothy June 07, 2023 for Model Number JB630RF4SS My digital display keeps beeping and going blank then shows 0 then back to normal. Would I have to replace the entire board?