Customer Questions and Answers for Dryer Front Bearing Drum Slide Green 2-Pack by Ge

Harvey, an idea of what the issue is, would be more helpful, but at this point it seems to be a tie between the push to start switch and a faulty timer, as the " most common switch failure on GE clothes dryer".

Mark, On your model I show the that you would need three of the slides... 1- AP3206716 and two AP5668531

Hello Lori, the slides are made of different compounds and for that reason are placed on different locations. The whites ones part number WE03X37318 go on the outside and the green/gray ones part number WE03X37317 go on the top center of the bearing. Hope this helps!

Brian, You will need 2 of the upper bearing slides WE03X37317 and 2 of the lower bearing slides WE03X37318. It is always best to replace all of them at the same time.

Hello Tommy. Based on the information you provided, you will need to replace the motor WE17X10010 in the unit. This model uses 4 glides. 2 green and 2 white.

Hello James, You are correct that two WE03X37318 and two WE03X37317 are needed for this repair. You may come out cheaper to order the dryer bearing kit WE49X20697 since it comes with all four slides, the top bearing, and the felt seal.

Hello Kaeden. You will need to order 2 of WE03X37318 and 2 of WE03X37317 for the glides needed.

Wayne, You will need two(2) WE03X37317 green or gray colored glides and two(2) WE03X37318 white colored glides. The gray/green glide go in the 11 o'clock and 1 o'clock positioms and the white colored glides will go in the 10 o'clock and the 2 o'clock positions. with GE products you have to make sure you use the correct model number [ DBXR463EG0WW] in some cases you would need to delete or omit the 0. The parts are in stock and available at this time. Thanks,

Hello Tarhill. Yes, your unit requires 2 of each for the glides.

Hello David,. These two glides, WE03X37318 and WE03X37317, are made of different materials. The green ones go in the center and the white ones to the outside.