Valerie Dortch October 09, 2023 for Model Number WEG515S0FS0 My oven will not turn on. There's a clicking sound and I smell gas when I turn it on, but not fire. The panel display does not show all the numbers and time, however I can see some numbers when the oven was working. Is the problem with the control panel or the ignitor?
1 Answer Valerie D, Part of the issue is the control, the other is either the ignitor or the safety valve. Read More...
Jmills August 18, 2022 for Model Number JKP75SM1SS I am trying to find a replacement for the push button pannel on my double GE wall oven model JKP75S0M1SS. I believe the original part number is WB27T10949. Is there a replacement part or retro kit available for the unit?
1 Answer Jmills, This unit would appear to have a retrofit that you would need to contact GE in regards to it. Read More...
Rc June 24, 2022 for Model Number JTP30BM2BB I have a GE JTP30BM2BB Wall Oven Unit and the sticker faceplate is broken and peeling off. Will this faceplate (WB27T11229) fit my oven?
1 Answer Hello Rc, please enter the model number into our website, go to the Control panel parts and the diagram will have the faceplate dimensions, check your model faceplate against the display, if the range's control panel was upgraded there is a faceplate you can use,WB27T11229 if it has not you will need to contact the manufacturer's Cust service as the original faceplate is no longer available due to a Service Rework. They are not interchangeable, Read More...
1 Answer David, if the model number of your appliance could be provided in a new question, this will allow the most accurate information to be presented. Read More...
Michael February 09, 2022 for Model Number JTP75SM1SS I'm hoping you can help me... I'm looking for a replacement for the control panel overlay, part number for it is WB27T10949. It's for a GE oven, JTP75SM1SS. The oven came with our house, and the overlay is looking quite bad now. Thank you so much for your time and assistance.
1 Answer Michael, Thanks for the question!!! That part is no longer available. There is a retrofit part, you may need to replace other parts as well with this WB36T11261. See the parts diagram for other parts that may be needed. Read More...
Jeff December 10, 2021 Roy for Model Number JKP35SM2SS ANSWER Roy, For this issue, you will want to contact GE Appliances as the original overlay is not available and has been redesigned. This would require a kit from the manufacturer. Tied to this question, I bought the new controls and face plate, but there was no sticker provided for the lower oven control knob settings. Do you have the control knob "sticker"
1 Answer Jeff, We will need to have the model number of the product to be able to assist properly. If you have a model that you had to go through GE to change then buying the new stuff will not work as it has to be retrofitted. Read More...
Steve December 02, 2021 for Model Number JTP35BM2BB Hello, is this the right part number for the face plate? Current one (original one) is peeling off. Thank you Part Number: AP4484324
1 Answer Hello Steve, according to the manufacturer: This faceplate is used on retrofitted models only that have an existing overlay that is approximately 9.4" across. and the knob is through the control panel not the faceplate. Read More...
Dave July 20, 2021 for Model Number JKP30SM2SS Control panel face plate is crinkled and falling off my ge wall oven. I see no replacement parts are available. Are there retro kits available?
1 Answer Dave, This is something you will need to contact GE directly on as they may still have a retro kit that will work but can only be gotten through them. Read More...
Mardi February 26, 2021 for Model Number JTP30S0M1SS We have an GE wall oven and the overlay for the temperature and clock has become cracked and brittle. I have looked at a couple pieces but want to make sure what to buy. Can you help. Also are these parts GE parts or generic. Thank you.
1 Answer Mardi, the faceplate used is going to be dependent on if it is a retrofitted control panel or not. If the overlay is 17.5" in length, the control panel kit WB49T10037 would be needed. If the overlay is 9.4" in length, the overlay WB27T11229 would be used. These parts are GE parts. Read More...
Auntb167 January 08, 2021 for Model Number #JS750EFES We had a power surge yesterday and I can not get my control panel on my GE #JS750EFES to come on, the stovetop is working can you tell me if there is a reset button somewhere. I have tried turning the breaker off and unplugging it.
1 Answer AuntB167, This issue will be caused by a faulty control board WB27X25361. There will be no reset on the control board and it will need to be replaced. Read More...