Juan March 25, 2021 for Model Number JTP55SM2SS I currently have a JTP55SM2SS dual oven and would like to retrofit the controller. Can you please confirm which parts i actually need to perform the retrofit.
1 Answer Juan, In order to get a retrofit kit for this model you would need to contact GE as they would be the ones that could get it for you. Read More...
Sam October 17, 2020 for Model Number JTP55SOM1SS I need a replacement plate for the panel. Do you stock these?
1 Answer Hello Sam, I'm sorry but there is no overlay available for this model. It would have to be retrofitted to a completely different control panel and board on this model. Thank you for your patience and understanding in this matter. Read More...
Ak August 24, 2020 for Model Number J SP39W0VWW Control touch panel peeling and cannot move button to high in broil and timer not working. Where to buy replacement of part? Thank you.
1 Answer Unfortunately your parts are no longer manufactured. You could try checking with corecentricsolutions.com and use there return for repair service. You would need to remove the electronic control and mail it to them for repair as long as the control part number is on there list. Read More...
Guy July 08, 2019 for Model Number JTP55CM1CC My face plate is peeling off. Do you have a replacement and if so, what is the part number. Thank you
1 Answer Guy, For the issue of the faceplate peeling off, you will want to contact GE. It appears that there is a retrofit kit for this unit for this issue and it can only be gotten from them. Read More...
Caroline November 05, 2018 for Model Number jkp30b0m1BB Have a GE wall oven, jkp30b0m1BB, that needs replacement part WB49T10051X . Ordered elsewhere 2 months ago and still havent gotten jt. All we need is the panel for the buttons. What part would work?
1 Answer Caroline, it looks like you can get it as a panel assembly, part number is WB36T11269, this would consist of the panel and button overlay. Read More...
Indy October 28, 2018 for Model Number WB27T11233 (AP4484328) Just want to confirm I don't need a retrofit part to replace the peeling control panel I have on my double oven? The control panel/faceplate measures 17.5". Thanks.
Caroline September 25, 2018 Have a wall oven, GE model jkp30b0m1BB and need to find a replacement control panel or at least overlay. Having trouble finding one.
1 Answer Caroline, There are 2 different control plates i noticed and we need to know if this unit has been retrofitted. One console has an opening of about 18 in. where the overlay is and the other has an opening of about 10. Please post another question with this new info and model and serial info. Read More...
Bill July 10, 2018 for Model Number Jkp55som1ss My control panel overlay is peeling off my JKP55SOM1SS double oven. I am having difficulty finding the correct item to order for replacement. Can you assist, please? Thanks!
1 Answer Bill, the part number for the interface is WB27T11233,it is in the color black. Read More...
Edward F November 03, 2017 for Model Number JTP55BM1BB I have had the same experience as the others--we ordered not one, but two faceplate covers thinking that the first one (that was too small) was sent in error. Anyway, we've since learned that the part is no longer available. So now we are thinking that we might be able to remove the existing overlay (it's peeling), glue it back on, then place one of the new overlays over that. My question is: is there a glue you can recommend that is heat resistant and would work in this situation? Thank you in advance.
1 Answer Edward, Unfortunately we do not have any information on glue that would work for this. Read More...
Darryl June 04, 2017 for Model Number JTP55SM1SS We have a JTP55SM1SS double oven and it appears that the buttons are pealing off. Do you sell replacements. I need WB49T10041 panel kit.
1 Answer Darryl, The manufacturer hes "retrofitted" the replacement parts. The WB49T10041 Kit, Panel,Control(S/S) is no longer available from the manufacturer. The WB27T11233 / WB27T11233 Faceplate/Keypad Asmb. would be the part to order to repair/replace the buttons that are peeling off. We would expect the "buttons" on the new overlay to align properly to the buttons of the keypanel board housing with little to no alignment issues. The part is in stock and available at this time. Thanks, Read More...